| | | |
A |
|
| Abgeleitete Profile ( ) |
|
| abgeleitete Profile ( ) |
|
| Abgleich, abgeleitete Profile ( ) |
|
| Abgleichen |
| | Reihenfolge für Regeln ( ) ( ) ( ) |
|
| add_install_client-Befehl, JumpStart-Verzeichniszugriff ( ) |
|
| Alternative Installationsprogramme ( ) |
|
| Ampersands (&&) Regelfeld ( ) |
|
| AND-Regelfeld ( ) |
|
| any |
| | Probe-Schlüsselwort, Beschreibung und Werte ( ) |
| | Rule-Schlüsselwort, Beschreibung und Werte ( ) ( ) |
|
| Anzeige |
| | Voraussetzungen für tip-Verbindung ( ) ( ) |
|
| Arbeitsspeicher, und Größe des Swap-Speicherplatzes ( ) |
|
| arch, Probe-Schlüsselwort ( ) |
|
| arch, Rule-Schlüsselwort ( ) ( ) |
|
| Archiv |
| | JumpStart-Profilbeispiel ( ) ( ) ( ) ( ) ( ) |
| | Schlüsselwörter, benutzerdefiniertes JumpStart ( ) |
|
| archive_location-Schlüsselwort ( ) |
|
| Ausgabedateien |
| | Finish-Skript-Protokoll ( ) |
| | Protokoll für Begin-Skript ( ) |
|
| Ausrufezeichen (!) rule-Feld ( ) |
|
| auto_install_sample-Verzeichnis |
| | check-Skript ( ) ( ) |
| | Dateien in JumpStart-Verzeichnis kopieren ( ) ( ) ( ) |
| | set_root_pw-Finish-Skript ( ) ( ) |
| | | |
B |
|
| -b, Option des setup_install_server-Befehls ( ) |
|
| Backslash in rules-Dateien ( ) |
|
| backup_media-Schlüsselwort ( ) |
|
| begin.log-Datei ( ) |
|
| Begin-Regelfeld, Beschreibung ( ) |
|
| Begin-Skripten |
| | abgeleitete Profile erstellen ( ) ( ) |
| | Berechtigungen ( ) |
| | Regelfeld ( ) |
| | standortspezifische Installationsprogramme ( ) |
| | Überblick ( ) |
|
| Benennung, custom_probes-Datei ( ) |
|
| Benutzerdefinierte JumpStart-Installation ( ) |
| | Beispiele ( ) ( ) |
| | | Booten und Installieren ( ) |
| | | check-Skript ( ) |
| | | eng_profile erstellen ( ) |
| | | Entwicklungssysteme einrichten ( ) |
| | | JumpStart-Verzeichnis ( ) ( ) |
| | | marketing_profile erstellen ( ) |
| | | Marketing-Systeme einrichten ( ) ( ) |
| | | Netzwerk ( ) |
| | | nicht vernetzte Systeme ( ) |
| | | Profile für RAID-1-Volumes ( ) ( ) |
| | | rules-Datei bearbeiten ( ) ( ) |
| | | Solaris Flash-Profil ( ) ( ) ( ) ( ) |
| | | Standalone-Systeme ( ) |
| | | Standortkonfiguration ( ) ( ) |
| | | WAN-Boot-Installationsprofil ( ) |
| | Beschreibung ( ) |
| | Booten und Installieren ( ) |
| | optionale Funktionen ( ) |
| | | Begin-Skripten ( ) ( ) |
| | | Finish-Skripten ( ) ( ) |
| | | standortspezifische Installationsprogramme ( ) |
| | | Überblick ( ) |
| | Profilschlüsselwörter ( ) |
| | Überblick ( ) |
| | Voraussetzungen für tip-Verbindung ( ) ( ) |
| | vorbereiten ( ) ( ) |
|
| Berechtigungen |
| | Begin-Skripten ( ) |
| | Finish-Skripten ( ) |
| | JumpStart-Verzeichnis ( ) ( ) |
|
| boot: cannot open /kernel/unix, Meldung ( ) |
|
| boot_device-Schlüsselwort ( ) |
|
| Booten |
| | mit GRUB, Befehlsreferenz ( ) |
| | mit GRUB installieren ( ) ( ) |
| | Profildiskette erstellen ( ) |
|
| bootenv createbe-Schlüsselwort ( ) |
|
| bootparams, Datei, aktualisieren ( ) |
|
| bootparams-Datei, JumpStart-Verzeichniszugriff gewähren ( ) |
|
| Bourne-Shell-Skripten in Regelfeldern ( ) |
| | | |
C |
|
| -c, Option |
| | pfinstall-Befehl ( ) |
| | add_install_client-Befehl ( ) ( ) |
|
| Can't boot from file/device, Meldung ( ) |
|
| check script, custom_probes-Datei validieren ( ) |
|
| check-Skript |
| | abgeleitete Profile und ( ) |
| | custom_probes-Datei validieren ( ) |
| | custom_probes.ok-Datei erstellen ( ) |
| | Regeln testen ( ) ( ) |
| | rules-Datei validieren ( ) ( ) |
|
| Check-Skript, Rules-Datei Validierung ( ) |
|
| check-Skript |
| | rules.ok-Datei erstellen ( ) |
|
| client_arch-Schlüsselwort ( ) |
|
| CLIENT MAC ADDR, Fehlermeldung ( ) |
|
| client_root profile-Schlüsselwort ( ) |
|
| clock gained xxx days, Meldung ( ) |
|
| cluster-Profilschlüsselwort |
| | Beispiele ( ) |
| | Beschreibung und Werte ( ) ( ) |
|
| CPUs (Prozessoren) |
| | Probe-Schlüsselwörter ( ) |
| | Rule-Schlüsselwörter ( ) ( ) |
|
| .cshrc-Datei ( ) |
|
| custom_probes-Datei |
| | benennen ( ) |
| | custom_probes ( ) |
| | mit check-Skript validieren ( ) ( ) |
| | Voraussetzungen ( ) |
|
| custom_probes.ok-Datei |
| | Beschreibung ( ) |
| | erstellen ( ) ( ) ( ) |
| | | |
D |
|
| Dateien oder Dateisysteme |
| | Ausgabe von Begin-Skript ( ) |
| | Finish-Skript-Ausgabe ( ) |
| | kopieren |
| | | JumpStart-Verzeichnisdateien mittels Finish-Skripten ( ) |
|
| Dateien und Dateisysteme |
| | erstellen |
| | | lokale Dateisysteme ( ) |
| | | RAID-1-Volumes ( ) |
| | Erstellen eines UFS ( ) |
| | kopieren |
| | | JumpStart-Installationsdateien ( ) ( ) ( ) ( ) |
| | Remote-Dateisysteme einhängen ( ) |
|
| dfstab-Datei ( ) ( ) |
|
| Disketten |
| | JumpStart-Verzeichniszugriff ( ) |
| | x86: JumpStart-Verzeichnis ( ) |
|
| Diskless-Clients |
| | Plattformen ( ) |
| | Swap-Speicherplatz ( ) |
|
| disks, Probe-Schlüsselwort, Beschreibung und Werte ( ) |
|
| disksize, Rule-Schlüsselwort, Beschreibung und Werte ( ) ( ) |
|
| domainname, Probe-Schlüsselwort ( ) |
|
| domainname, Rule-Schlüsselwort ( ) ( ) |
|
| Domänen |
| | Probe-Schlüsselwort ( ) |
| | Rule-Schlüsselwort ( ) ( ) |
|
| dontuse-Profilschlüsselwort ( ) ( ) |
| | | |
E |
|
| Einhängen |
| | durch Solaris-Installation ( ) |
| | Remote-Dateisysteme ( ) |
| | Vorsichtsmaßnahmen bei Begin-Skripten ( ) |
|
| Einschränkungen für ZFS ( ) |
|
| eng_profile, Beispiel ( ) |
|
| Erstellen |
| | custom_probes.ok-Datei ( ) ( ) |
| | Festplattenkonfigurationsdateien ( ) |
| | JumpStart-Verzeichnis, auf dem Server ( ) |
| | lokale Dateisysteme ( ) |
| | Profile |
| | | abgeleitet ( ) |
| | | Beschreibung ( ) |
| | RAID-1-Volumes ( ) |
| | rules-Datei ( ) |
| | rules.ok-Datei ( ) ( ) ( ) |
| | UFS ( ) |
|
| /etc/bootparams, Datei, JumpStart-Verzeichniszugriff aktivieren ( ) |
|
| /etc/bootparams-Datei, JumpStart-Verzeichniszugriff gewähren ( ) |
|
| /etc/dfs/dfstab-Datei ( ) ( ) |
|
| /etc/mnttab-Datei ( ) |
| | | |
F |
|
| fdisk-Befehl ( ) |
|
| fdisk-Profilschlüsselwort |
| | Beispiel ( ) |
| | Beschreibung und Werte ( ) |
|
| Fehlerbehebung |
| | allgemeine Installationsprobleme |
| | | Booten des Systems ( ) |
| | | Booten über das Netzwerk mit DHCP ( ) |
| | Booten über das Netzwerk mit DHCP ( ) |
| | Booten vom falschen Server ( ) |
|
| Festplatten |
| | einhängen ( ) |
| | Größe |
| | | Probe-Schlüsselwörter ( ) ( ) |
| | | Root-Speicherplatz ( ) |
| | | Rule-Schlüsselwörter ( ) ( ) ( ) ( ) |
| | Partitionierung |
| | | Beispiele ( ) |
| | | für Standardpartitionierung auswählen ( ) |
| | | Profilschlüsselwort ( ) |
| | | von Standardpartitionierung ausschließen ( ) |
| | rootdisk-Werte ( ) ( ) |
| | Swap-Bereich |
| | | Profil-Beispiele ( ) |
| | Swap-Speicherplatz |
| | | Diskless-Client ( ) |
| | | Maximalgröße ( ) |
| | | Profilbeispiele ( ) |
|
| Festplattenkonfigurationsdateien |
| | Beschreibung ( ) ( ) |
| | erstellen |
| | | SPARC-basierte Systeme ( ) |
| | | x86-basierte Systeme ( ) |
|
| filesys-Profilschlüsselwort |
| | Beispiele ( ) ( ) |
| | Beschreibung und Werte ( ) |
|
| filesys-Schlüsselwort ( ) ( ) |
|
| finish.log-Datei ( ) |
|
| Finish-Regelfeld, Beschreibung ( ) |
|
| Finish-Skripten |
| | Packages und Patches hinzufügen ( ) |
| | Regelfeld ( ) |
| | Root-Passwort eines Systems setzen ( ) |
| | Root-Umgebung anpassen ( ) |
| | | |
H |
|
| Hinzufügen |
| | Cluster bei einem Upgrade ( ) |
| | Packages und Patches mittels Finish-Skript ( ) |
| | Pakages aus Softwaregruppen ( ) |
| | Regeln zur rules-Datei ( ) |
|
| hostaddress, Probe-Schlüsselwort ( ) |
|
| hostaddress, Rule-Schlüsselwort ( ) ( ) |
|
| hostname, Probe-Schlüsselwort, Beschreibung und Werte ( ) |
|
| hostname, Rule-Schlüsselwort |
| | Beispiel ( ) |
| | Beschreibung und Werte ( ) ( ) |
| | | |
I |
|
| install_config-Befehl ( ) ( ) |
|
| install_type-Profilschlüsselwort |
| | Beispiele ( ) |
| | Profile testen ( ) |
| | Voraussetzung ( ) ( ) |
|
| install_type-Schlüsselwort ( ) |
|
| Installation vorbereiten, mit benutzerdefiniertem JumpStart ( ) |
|
| Installationsvorbereitung, bei benutzerdefiniertem JumpStart ( ) |
|
| installed, Probe-Schlüsselwort, Beschreibung und Werte ( ) |
|
| installed, Rule-Schlüsselwort, Beschreibung und Werte ( ) ( ) |
|
| IP-Adressen |
| | Probe-Schlüsselwort ( ) |
| | Rule-Schlüsselwort ( ) ( ) |
| | | |
M |
|
| marketing_profile, Beispiel ( ) |
|
| Mehrere Zeilen in rules-Dateien ( ) |
|
| memsize, Probe-Schlüsselwort, Beschreibung und Werte ( ) |
|
| memsize, Rule-Schlüsselwort, Beschreibung und Werte ( ) ( ) |
|
| metadb-Profilschlüsselwort ( ) |
|
| Mikroprozessoren |
| | Probe-Schlüsselwörter ( ) |
| | Rule-Schlüsselwörter ( ) ( ) |
|
| mnttab-Datei ( ) |
|
| model, Probe-Schlüsselwort, Beschreibung und Werte ( ) |
|
| model, Rule-Schlüsselwort, Beschreibung und Werte ( ) ( ) |
| | | |
N |
|
| Namen/Benennung |
| | abgeleitete Profilnamen ( ) |
| | Host-Name ( ) ( ) ( ) |
| | rules-Datei ( ) ( ) |
| | System-Modellnamen ( ) ( ) ( ) |
|
| network, Probe-Schlüsselwort, Beschreibung und Werte ( ) |
|
| network, Rule-Schlüsselwort, Beschreibung und Werte ( ) ( ) |
|
| Netzwerkinstallation, Benutzerdefinierte JumpStart-Installation, Beispiel ( ) |
|
| Netzwerknummer ( ) ( ) ( ) |
|
| No carrier - transceiver cable problem, Meldung ( ) |
|
| no_master_check-Schlüsselwort ( ) |
|
| noneuclidean-Profilschlüsselwort ( ) |
|
| Not a UFS filesystem, Meldung message ( ) |
| | | |
P |
|
| -p, Option des check-Skript ( ) |
|
| -p, Option von check-Skript ( ) |
|
| Packages |
| | Administrationsdatei ( ) |
| | Anforderungen bei der Verwendung der benutzerdefinierten JumpStart-Installation ( ) |
| | hinzufügen |
| | | mittels chroot ( ) |
| | | mittels Finish-Skript ( ) |
| | Solaris Live Upgrade |
| | | Anforderungen ( ) |
|
| Partitionierung |
| | Beispiele ( ) |
| | fdisk-Partitionen ( ) ( ) |
| | Festplatten ausschließen ( ) |
| | Profilschlüsselwort ( ) |
|
| partitioning, Profilschlüsselwort ( ) |
|
| partitioning-Schlüsselwort ( ) |
|
| Passwort, Root ( ) ( ) |
|
| Patches |
| | hinzufügen |
| | | mittels chroot ( ) |
| | | mittels Finish-Skript ( ) |
|
| Pfade, check-Skript ( ) ( ) |
|
| pfinstall-Befehl ( ) |
|
| Plattformen |
| | Diskless-Client ( ) |
| | Probe-Schlüsselwörter ( ) |
| | Rule-Schlüsselwörter ( ) ( ) |
| | System-Modellnamen ( ) ( ) ( ) |
| | Systemattribute und Profile abgleichen ( ) ( ) ( ) |
|
| probe, Rule-Schlüsselwort, Beschreibung und Werte ( ) |
|
| Probe-Schlüsselwörter |
| | arch ( ) |
| | disks ( ) |
| | domainname ( ) |
| | hostaddress ( ) |
| | hostname ( ) |
| | installed ( ) |
| | karch ( ) |
| | memsize ( ) |
| | model ( ) |
| | network ( ) |
| | osname ( ) |
| | rootdisk ( ) |
| | totaldisk ( ) |
|
| Profile |
| | abgeleitete Profile ( ) ( ) |
| | Beispiele ( ) |
| | | eng_profile ( ) |
| | | marketing_profile ( ) |
| | | Solaris Flash ( ) ( ) ( ) ( ) |
| | | WAN-Boot-Installation ( ) |
| | | ZFS ( ) |
| | benennen ( ) |
| | Beschreibung ( ) ( ) |
| | erstellen ( ) |
| | Kommentare in ( ) |
| | mit Systemen abgleichen ( ) ( ) ( ) |
| | Regelfeld ( ) |
| | testen ( ) |
| | Voraussetzungen ( ) ( ) |
|
| Profilschlüsselwörter ( ) ( ) |
| | archive_location ( ) |
| | backup_media ( ) |
| | Beschreibung |
| | | und Werte ( ) ( ) |
| | boot_device ( ) |
| | bootenv createbe ( ) |
| | bootenv installbe für ZFS ( ) |
| | client_arch ( ) |
| | client_root ( ) |
| | client_swap ( ) |
| | cluster |
| | | Beispiele ( ) |
| | | Beschreibung und Werte ( ) |
| | dontuse |
| | | usedisk und ( ) |
| | fdisk |
| | | Beispiel ( ) |
| | | Beschreibung und Werte ( ) |
| | filesys |
| | | Beispiele ( ) ( ) |
| | | Beschreibung und Werte ( ) |
| | | lokale Dateisysteme ( ) |
| | | RAID-1-Volumes ( ) |
| | | Remote-Dateisysteme ( ) |
| | forced_deployment, Beschreibung und Werte ( ) |
| | geo |
| | | Beschreibung und Werte ( ) |
| | Groß- und Kleinschreibung ( ) |
| | install_type |
| | | Beispiele ( ) |
| | | Beschreibung und Werte ( ) |
| | | für ZFS ( ) |
| | | Voraussetzung ( ) ( ) |
| | layout_constraint, Beschreibung und Werte ( ) |
| | local_customization, Beschreibung und Werte ( ) |
| | locale, Beschreibung und Werte ( ) |
| | metadb |
| | | Beispiele ( ) |
| | | Beschreibung und Werte ( ) |
| | no_master_check, Beschreibung und Werte ( ) |
| | noneuclidean ( ) |
| | Partitionierung |
| | | Beispiele ( ) ( ) |
| | | Festplatten ausschließen ( ) |
| | | Festplatten auswählen ( ) |
| | partitioning |
| | | Beschreibung und Werte ( ) |
| | Pool für ZFS ( ) |
| | root_device ( ) |
| | root_device für ZFS ( ) |
| | Schnellreferenz ( ) |
| | Statusdatenbankreplikationen erstellen (meatball) ( ) |
| | system_type |
| | | Beispiele ( ) |
| | | Beschreibung und Werte ( ) |
| | usedisk, Beschreibung und Werte ( ) |
|
| Protokolldateien |
| | Ausgabe von Begin-Skript ( ) |
| | Finish-Skript-Ausgabe ( ) |
|
| Prozessoren |
| | Probe-Schlüsselwörter ( ) |
| | Rule-Schlüsselwörter ( ) ( ) |
|
| prtvtoc-Befehl |
| | SPARC: Erstellen einer Festplattenkonfigurationsdatei ( ) |
| | x86: Festplattenkonfigurationsdatei erstellen ( ) |
| | | |
R |
|
| -r, Option des check-Skripts ( ) |
|
| -r, Option von check-Skript ( ) |
|
| Regeln |
| | abgeleitete Profile ( ) |
| | Abgleichsreihenfolge ( ) ( ) |
| | Beispiele ( ) |
| | Feldbeschreibungen ( ) |
| | Gültigkeit prüfen ( ) ( ) |
| | mehrzeilige Regeln ( ) |
| | Reihenfolge abgleichen ( ) |
| | rootdisk matching rules ( ) |
| | Übereinstimmungsregeln für rootdisk ( ) |
|
| Remote-Dateisysteme, einhängen ( ) |
|
| Root (/)-Dateisysteme, Profil-Beispiel ( ) |
|
| Root-Dateisysteme (/), Package-Anforderungen für eine inaktive Boot-Umgebung ( ) |
|
| root_device-Schlüsselwort ( ) |
|
| Root-Passwort, mit einem Finish-Skript setzen ( ) |
|
| Root-Umgebung, mit Finish-Skript anpassen ( ) |
|
| rootdisk |
| | Definition ( ) |
| | slice-Wert für filesys ( ) |
| | von JumpStart gesetzter Wert ( ) ( ) |
|
| RPC failed: error 5: RPC Timed out, Meldung ( ) |
|
| RPC-Fehler mit Zeitüberschreitung ( ) |
|
| RPC Timed out, Meldung ( ) ( ) |
|
| rule_keyword-Regelfeld ( ) |
|
| Rule-Schlüsselwörter ( ) |
| | any, Beschreibung und Werte ( ) ( ) |
| | arch ( ) ( ) |
| | disksize, Beschreibung und Werte ( ) ( ) |
| | domainname ( ) ( ) |
| | hostaddress ( ) ( ) |
|
| rule-Schlüsselwörter, hostname ( ) |
|
| Rule-Schlüsselwörter |
| | hostname ( ) ( ) |
| | installed, Beschreibung und Werte ( ) ( ) |
| | karch ( ) ( ) |
| | memsize ( ) ( ) |
| | model ( ) ( ) |
| | network ( ) ( ) |
| | osname ( ) ( ) |
| | probe ( ) |
| | totaldisk ( ) ( ) |
|
| rule_value-Regelfeld ( ) |
|
| rules |
| | abgeleitete Profile ( ) |
| | Feldbeschreibungen ( ) |
| | Syntax ( ) |
|
| rules-Datei |
| | Beispiel ( ) |
| | benennen ( ) ( ) |
| | benutzerdefinierte JumpStart-Installation, Beispiel ( ) ( ) |
| | Beschreibung ( ) |
| | erstellen ( ) |
| | Kommentare in ( ) |
| | mehrzeilige Regeln ( ) |
| | mit check-Skript validieren |
| | | abgeleitete Profile und ( ) |
| | | benutzerdefinierte JumpStart-Installation, Beispiel ( ) |
| | mittels check validieren ( ) |
| | Regeln hinzufügen ( ) |
| | Regeln testen ( ) |
| | Syntax ( ) |
|
| rules.ok-Datei |
| | Abgleichsreihenfolge für Regeln ( ) ( ) |
|
| rules.ok-Datei |
| | Beschreibung ( ) |
| | erstellen ( ) ( ) |
|
| rules.ok-Datei, Reihenfolge für Regeln abgleichen ( ) |
| | | |
S |
|
| -s, Option des Befehls add_install_client ( ) |
|
| Schlüsselwörter |
| | Probe ( ) |
| | Solaris Flash-Archive, benutzerdefiniertes JumpStart ( ) |
|
| Server |
| | JumpStart-Verzeichnis erstellen ( ) |
| | Root-Speicherplatz ( ) |
|
| set_root_pw -Finish-Skript ( ) |
|
| set_root_pw-Finish-Skript ( ) |
|
| share-Befehl |
| | JumpStart-Verzeichnis freigeben ( ) |
| | JumpStart-Verzeichnis gemeinsam nutzen ( ) |
|
| shareall, Befehl ( ) |
|
| shareall-Befehl ( ) |
|
| SI_PROFILE, Umgebungsvariable ( ) |
|
| Sicherheit, Root-Passwort ( ) ( ) |
|
| Skripten |
| | Begin-Skripten ( ) ( ) ( ) |
| | Bourne-Shell-Skripten in Regelfeldern ( ) |
| | Finish-Skripten ( ) ( ) ( ) |
|
| Softwaregruppe mit eingeschränkter Netzwerkunterstützung ( ) |
|
| Softwaregruppen |
| | aktualisieren ( ) |
| | für Profile ( ) ( ) |
| | Profilbeispiele ( ) |
|
| Solaris-Software |
| | Gruppen ( ) ( ) |
| | | aktualisieren ( ) |
| | | Profilbeispiele ( ) |
| | Release oder Version |
| | | installed, Probe-Schlüsselwort ( ) |
| | | installed, Rule-Schlüsselwort ( ) ( ) |
| | | osname, Probe-Schlüsselwort ( ) |
| | | osname, Rule-Schlüsselwort ( ) ( ) |
|
| Solaris-Softwaregruppe für Endbenutzer ( ) |
|
| Solaris-Softwaregruppe für Entwickler ( ) |
| | Profilbeispiel ( ) |
|
| Solaris-Softwaregruppe zur Hauptsystemunterstützung ( ) |
|
| Solaris-Softwareversion |
| | installed, Probe-Schlüsselwort ( ) |
| | installed, Rule-Schlüsselwort ( ) ( ) |
| | osname, Probe-Schlüsselwort ( ) |
| | osname, Rule-Schlüsselwort ( ) ( ) |
|
| Speicher |
| | Probe-Schlüsselwort ( ) |
| | Rule-Schlüsselwort ( ) ( ) |
|
| Speicherbereich, Profilbeispiele ( ) |
|
| Speicherbereiche |
| | Probe-Schlüsselwort ( ) |
| | Profilbeispiele ( ) |
| | Rule-Schlüsselwort ( ) ( ) |
|
| Standalone-Systeme |
| | Beispiel für benutzerdefinierte JumpStart-Installation ( ) |
| | Profilbeispiele ( ) |
|
| STANDARD-BOOT-GERÄT WECHSELN, Meldung ( ) |
|
| standortspezifische Installationsprogramme ( ) |
|
| Starten, check-Skript ( ) ( ) |
|
| stty-Befehl ( ) ( ) |
|
| SUNWCall-Gruppe ( ) |
|
| SUNWCprog-Gruppe ( ) |
|
| SUNWCreq-Gruppe ( ) |
|
| SUNWCrnet-Gruppe ( ) |
|
| SUNWCuser-Gruppe ( ) |
|
| SUNWCXall-Gruppe ( ) |
|
| Swap-Dateisysteme |
| | Größe ermitteln ( ) |
| | Profil-Beispiele ( ) |
| | Swap-Speicherplatz für Diskless-Clients ( ) |
| | und Speichergröße ( ) |
|
| system_type-Profilschlüsselwort |
| | Beispiele ( ) |
| | Beschreibung und Werte ( ) |
| | | |
V |
|
| Validieren |
| | custom_probes-Datei |
| | | mit check-Skript ( ) |
| | rules-Dateien |
| | | abgeleitete Profile und ( ) |
| | | benutzerdefinierte JumpStart-Installation, Beispiel ( ) |
| | Rules-Dateien |
| | | Check verwenden ( ) |
| | rules-Dateien |
| | | mit check-Skript ( ) |
| | | mittels check ( ) |
| | | Regeln testen ( ) |
|
| validieren |
| | Validieren custom_probes-Datei |
| | | testen ( ) |
|
| /var/sadm/system/logs/begin.log-Datei ( ) |
|
| /var/sadm/system/logs/finish.log-Datei ( ) |
|
| Variablen |
| | SI_PROFILE ( ) |
| | SYS_MEMSIZE ( ) |
|
| Version der Solaris-Software |
| | installed, Probe-Schlüsselwort ( ) |
| | installed, Rule-Schlüsselwort ( ) ( ) |
| | osname, Probe-Schlüsselwort ( ) |
| | osname Rule-Schlüsselwort ( ) ( ) |
|
| Verzeichnisse |
| | JumpStart |
| | | Beispiel einer rules-Datei ( ) |
| | | Berechtigungen ( ) ( ) |
| | | Dateien hinzufügen ( ) |
| | | Dateien kopieren ( ) |
| | | für Systeme erstellen ( ) |
| | | Installationsdateien kopieren ( ) ( ) ( ) ( ) |
| | | Verzeichnis erstellen ( ) |
| | | Verzeichnis freigeben ( ) |
| | | Verzeichnis gemeinsam nutzen ( ) |
| | wechseln |
| | | zu JumpStart-Verzeichnis ( ) ( ) |
| | | zu Solaris-Softwareabbild auf lokalem Datenträger ( ) |
| | | zu Solaris SPARC-Softwareabbild auf lokaler Festplatte ( ) |
| | | zu Solaris x86-Softwareabbild auf lokaler Festplatte ( ) |
|
| Verzeichniswechsel |
| | Solaris SPARC-Softwareabbild auf lokaler Festplatte ( ) |
| | zu JumpStart-Verzeichnis ( ) ( ) |
| | zu Solaris-Softwareabbild auf lokalem Datenträger ( ) ( ) |
| | zu Solaris x86-Softwareabbild auf lokaler Festplatte ( ) |
|
| volcheck-Befehl ( ) ( ) |
|
| Voraussetzungen |
| | custom_probes-Datei ( ) |
| | Profile ( ) ( ) |
|
| Voraussetzungen für tip-Verbindung ( ) ( ) ( ) |
|
| Vorgaben |
| | abgeleiteter Profilname ( ) |
| | installierte Softwaregruppe ( ) |
| | Partitionierung |
| | | Festplatten ausschließen ( ) |
| | | Festplatten auswählen ( ) |