TABLE 1-4 Monitoring and General Administration Commands
Command
|
Description
|
add notification
|
Set up email or SNMP trap notification.
|
add registeredarray
|
Discovers an array or all arrays on the same subnet as the management host and registers them.
|
add userrole
|
Adds a user name to the user access list and defines the user privileges.
|
list alarm
|
Provides detailed information on a specified alarm or summary information on all alarms
|
list array
|
Lists detailed information about specified arrays or all array names.
|
list date
|
Lists the current date and time for the array in hours, minutes, and seconds. (Not supported by j450 and B6000 JBODs.)
|
list device
|
List the details of a device or the devices being monitored.
|
list devices
|
List an overview of a device or the devices being monitored.
|
list disk
|
List the disk information on an array.
|
list event
|
Lists the Fault Management Service (FMS) event log information.
|
list firmware
|
Lists the firmware versions of the field-replaceable units (FRU) in this device
|
list fru
|
Lists the field-replaceable units (FRUs) in this device.
|
list jobs
|
Lists job IDs and status associated with the specified array and optionally specified job ID
|
list log
|
Lists the user-initiated actions performed for all registered arrays.
|
list mgmt-sw
|
Lists the management software application that you are logged into.
|
list notification
|
Lists the remote notification provider and its status.
|
list registeredarray
|
Lists registered array information
|
list storage-system
|
Lists detailed information about one or more arrays.
|
list site
|
Lists pertinent information on the site.
|
list userrole
|
Lists the user name and role defining the user’s array privileges.
|
login
|
Log in to the sscs command-line interface (CLI).
|
logout
|
Logs out of the remote sscs command-line interface session.
|
modify agent
|
Modify the fault management agent parameters.
|
modify array
|
Modifies the name assigned to the array.
|
modify firmware
|
Modifies the firmware versions of the specified field-replaceable units (FRUs) of the specified array
|
modify mgmt-sw
|
Stores the specified storage system name for the session. This command is useful for repeated operations with an array.
|
modify registeredarray
|
Change the locally stored password for a registered array.
|
modify site
|
Modifies the site properties for this instance of CAM.
|
modify storage-system
|
Modifies the array information
|
modify userrole
|
Change the user role or the IP address from which the user can log in.
|
register storage-system
|
Registers a storage system with the host
|
register sun-connect
|
Registers CAM software and all monitored arrays with Auto Service Request (ASR).
|
remove alarm
|
Removes the current alarms.
|
remove notification
|
Removes a local or remote notification.
|
remove registeredarray
|
Removes one or more arrays from the list of registered arrays.
|
remove userrole
|
Removes a user role assigned to a user name.
|
service
|
Perform service-related commands.
|
TABLE 1-5 Array Configuration Commands
Command
|
Description
|
add hostgroup
|
Adds hosts to a host group.
|
add license
|
Adds a license to the specified array.
|
create host
|
Creates a storage host.
|
create hostgroup
|
Creates a storage host group.
|
create initiator
|
Creates an initiator.
|
create iscsi initiator
|
Creates an iSCSI initiator on a host.
|
create pool
|
Creates an empty storage pool on the array
|
create profile
|
Creates a storage profile on the array.
|
create repset
|
Creates a storage replication set using a peer World Wide Name or remote array name (not applicable to 2500 Series).
|
create snapshot
|
Creates a snapshot for the specified volume.
|
create vdisk
|
Creates a virtual disk.
|
create volume
|
Creates a volume within a specified pool.
|
create volume-copy
|
Creates a copy of the volume (not applicable to 2500 Series).
|
delete host
|
Deletes one or more hosts.
|
delete hostgroup
|
Deletes one or more host groups.
|
delete initiator
|
Deletes one or more initiators.
|
delete iscsi-session
|
Deletes an iscsi-session
|
delete pool
|
Deletes one or more pools.
|
delete profile
|
Deletes one or more profiles.
|
delete repset
|
Deletes one or more replication sets (not applicable to 2500 Series).
|
delete snapshot
|
Deletes one or more snapshots.
|
delete vdisk
|
Deletes one or more named virtual disks.
|
delete volume
|
Deletes one or more named volumes.
|
delete volume-copy
|
Deletes a volume-copy (not applicable to 2500 Series).
|
disable snapshot
|
Disables one or more snapshots.
|
export array
|
Renders an extensible markup language (XML) representation of the array
|
export profile
|
Exports one or more profiles into an XML representation.
|
fail disk
|
Sets a disk to the failed state.
|
import array
|
Applies an array configuration file to the specified array.
|
import profile
|
Imports one or more profiles from a specified XML file.
|
initialize disk
|
Initializes a disk.
|
list controller
|
Lists configuration information for the specified controller
|
list fcport
|
Lists Fibre Channel port information for the controller of the specified array.
|
list host
|
Lists the host names and details for an individual host.
|
list hostgroup
|
Lists host group name and hosts for an individual host group.
|
list initiator
|
Lists the initiators and provides a description of each.
|
list iperformance
|
Displays iSCSI performance statistics for the 2510 array and enables you to define the type of iSCSI performance statistics to monitor.
|
list iscsi-port
|
Lists iSCSI ports.
|
list iscsi-session
|
Lists iSCSI sessions
|
list iscsi-target
|
Lists iSCSI target name configured for the specified array.
|
list license
|
Shows all licenses that are associated with the array, along with related licensing details (serial number, controller serial number, and further details)
|
list mapping
|
Lists mappings for the array. You can filter the output by specifying the name of a storage domain, a host, or a host group.
|
list os-type
|
Shows all of the operating systems that are supported by the array. The values returned can be used in subsequent requests to create or modify initiators, or to modify the default host type of the array.
|
list performance
|
Shows detailed performance statistics. You can use the following options only if a single array is specified.
|
list pool
|
Lists storage pool information.
|
list profile
|
Lists the named storage profiles
|
list repset
|
Lists replication set information (not applicable to 2500 Series).
|
list sasport
|
Lists SAS port information.
|
list snapshot
|
Lists the specified snapshot or snapshots associated with this array.
|
list tray
|
Lists information about one or more storage trays in the array.
|
list vdisk
|
Lists virtual disk (vdisk) or virtual disks information associated with this array.
|
list volume
|
Lists volume information.
|
list volume-copy
|
Lists volume copy information. If neither the source volume nor the target volume is specified, a summary of all volume copies is listed. If the source volume or the target volume is specified, a detailed listing of each is generated.
|
map host
|
Maps one or more volumes and snapshots to a host. Any previous mappings for the given volumes and snapshots are removed.
|
map hostgroup
|
Maps one or more volumes and snapshots to a host group. Any previous mappings for the given volumes or snapshots are removed.
|
map initiator
|
Maps an initiator to a volume or snapshot. Any previous mappings for the given volumes or snapshots are removed.
|
map snapshot
|
Maps one or more snapshots to a host or host group. If no host or host group is specified, the snapshot or snapshots are mapped into the Default partition.
|
map volume
|
Maps one or more volumes to a host or host group. Any previous mappings for the given volume or volumes are removed.
|
modify array
|
Modifies the configuration of the specified array
|
modify controller
|
Modifies the controller settings.
|
modify date
|
Modifies the date on the array, allowing you to set the time on the array, or to synchronize the time with the management host (that is, setting the array's time to the management host's time.)
|
modify disk
|
Specifies the disk role.
|
modify fcport
|
Modifies the Fibre Channel port settings on the specified array.
|
modify host
|
Modifies the host name.
|
modify hostgroup
|
Modifies the host group name.
|
modify initiator
|
Modifies an initiator.
|
modify iperformance
|
Modifies the settings for iSCSI performance data.
|
modify iscsi-port
|
Modifies an iSCSI port.
|
modify iscsi-target
|
Modifies an iSCSI target.
|
modify jobs
|
Cancels or prioritizes a running or outstanding job.
|
modify license
|
Activates replication set licenses (applicable to 2500 Series only when running firmware version 07.35.nn.nn or higher).
|
modify notification
|
Modifies notification options.
|
modify performance
|
Modifies settings for performance monitoring
|
modify pool
|
Modifies the name or description of the storage pool or the profile with which this pool is associated.
|
modify profile
|
Modifies a storage profile on the array.
|
modify repset
|
Modifies the mode, consistency group, or replication priority of the specified replication set (not applicable to 2500 Series).
|
modify snapshot
|
Modifies the specified snapshot
|
modify tray
|
Modifies information about one or more storage trays in the array.
|
modify vdisk
|
Specifies modifications to a virtual disk.
|
modify volume
|
Modifies any of a volume’s attributes
|
modify volume-copy
|
Modifies a volume copy (not applicable to 2500 Series).
|
offline vdisk
|
Sets a virtual disk offline.
|
online vdisk
|
Sets a virtual disk online.
|
reconstruct disk
|
Initiates a disk reconstruction.
|
remove hostgroup
|
Removes one or more hosts from a host group.
|
remove license
|
Removes the replication set feature license from the specified array (not applicable to 2500 Series).
|
remove notification
|
Removes a local or remote notification provider.
|
reset array
|
Resets the specified array.
|
rreset controller
|
Resets the specified controller.
|
resnap snapshot
|
Resnaps one or more existing snapshots.
|
revive disk
|
Attempts to bring a disk to the optimal state.
|
revive vdisk
|
Revives a virtual disk
|
service fail
|
Places a field-replaceable unit of an array into a failed state.
|
service locate
|
Turns on the drive, tray, or array locator LED.
|
service redistribute
|
Redistributes volumes back to their preferred owners.
|
service revive
|
Attempts to place the array controller or disk drive into the optimal state. This can create complications. Do not initiate this command without first consulting Sun Customer Service personnel.
|
snapshoot volume
|
Creates and manages snapshots.
|
unmap host
|
Unmaps one or more snapshots or volumes from a host.
|
unmap hostgroup
|
Unmaps one or more snapshots or volumes from a host group.
|
runmap initiator
|
Removes the mapping from one or more initiators to a volume or snapshot.
|
unmap snapshot
|
Removes the mapping from one or more snapshots to a host or hostgroup.
|
unmap volume
|
Unmaps one or more volumes from a host or host group.
|
unregister storage-system
|
Unregisters an array.
|
unregister sun-connection
|
Unregisters CAM software and all monitored arrays from Auto Service Request (ASR).
|
version
|
Shows the versions of software that you are running on this array and the client.
|