Skip Navigation Links | |
Exit Print View | |
Sun Fire X4640 Server Linux Installation Guide Sun Fire X4640 Server Documentation Library |
About This Documentation (PDF and HTML)
Introduction to Linux Installation
Sun Installation Assistant (SIA)
Installing Red Hat Enterprise Linux
Overview of Red Hat Enterprise Linux Installation
Installing RHEL From Distribution Media
Installing and Updating SUSE Linux Enterprise Server
Introduction to Installing SLES From Distribution Media
How to Install SLES From Distribution Media
Configuring a Linux Server to Support PXE Installation
How to Copy Files from the Tools and Drivers CD
How to Install and Configure a DHCP Server
How to Install Portmap on Your DHCP Server
How to Configure the TFTP Service on Your DHCP Server
How to Install and Configure the neopxe Boot Server Daemon
How to Configure the NFS Service on Your PXE Server
How to Create a PXE Installation Image for Red Hat Linux
Creating a PXE Image for SUSE Linux
How to Install RHEL and SUSE Linux From a PXE Server
Booting From OS Distribution Media
How to Boot From OS Media Locally
How to Boot From OS Distribution Media or ISO File Remotely
Preliminary Tasks Before Installing An OS
How to Configure the Serial Port
How to Erase Your Boot Hard Disk
Identifying Logical and Physical Network Interface Names for Linux OS Configuration
SUSE Linux - How to Identify Logical and Physical Network Interface Names While Installing the OS
RHEL - How to Identify Logical and Physical Network Interface Names While Installing the OS
Installing the OS requires you to view the system console output. This can appear on both the serial port and the video port.
Note - This topic describes the default video and serial port outputs. Other settings, including console commands and GRUB menu selections, can change this behavior.
Your server is equipped with a serial port and a video port.
Serial Port – From the moment you start the SP until the OS assumes control of the display, all output appears on the serial port.
There are two ways to connect to the serial port:
Physically, by connecting a cable to the serial port. See How to Configure the Serial Port.
Virtually, by configuring an SSH connection to the SP, then by issuing the start /SP/console command. See Communicating With the ILOM and the System Console in Sun Fire X4640 Server Installation Guide for more details.
Video Port – After the SP startup is complete, the system begins POST/BIOS, and displays all output on the video port. This continues until the OS assumes control of the display. Most OS configurations continue to display information on the video port.
There are two ways to connect to the video port:
Physically, by connecting a DB9 cable to the video port on the server. See Installing the Server Hardware in Sun Fire X4640 Server Installation Guide.
Virtually, by starting a JavaRConsole session. See Communicating With the ILOM and the System Console in Sun Fire X4640 Server Installation Guide.
Other settings can affect this behavior. They include console commands, ILOM settings, and GRUB settings for operating systems that include a GRUB.