|Skip Navigation Links|
|Exit Print View|
| Sun Ethernet Fabric Operating System
OSPF Administration Guide
This procedure enables OSPF to treat the specified interface as an OSPF demand circuit.
SEFOS(config-if)# ip ospf demand-circuit
SEFOS# show ip ospf interface vlan 1 vlan1 is line protocol is up Internet Address 10.4.0.1, Mask 255.255.0.0, Area 0.0.0.0 AS 1, Router ID 10.10.2.1, Network Type BROADCAST, Cost 1 Configured as demand circuit. Run as demand circuit. Transmit Delay is 5 sec, State 2, Priority 1 No designated router on this network No backup designated router on this network Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 4 sec Neighbor Count is 0, Adjacent neighbor count is 0