Sun StorageTek Enterprise PCI-X 4 Gb FC Single and Dual Port Host Bus Adapters Release Notes

This document contains the latest supplementary information for the Sun StorageTektrademark Enterprise PCI-X 4 Gb Fibre Channel (FC) Single and Dual Port Host Bus Adapter (HBA) (SG-XPCI1FC-QF4, SG-XPCI2FC-QF4). Use it with the latest version of the Sun StorageTek Enterprise PCI-X 4Gb Fibre Channel Single and Dual Port HBA Installation Guide (part number 819-3899-10 or later).

It contains the following sections:



Note - Sun is not responsible for the availability of third-party Web sites mentioned in this document. Sun does not endorse and is not responsible or liable for any content, advertising, products, or other materials that are available on or through such sites or resources. Sun will not be responsible or liable for any actual or alleged damage or loss caused by or in connection with the use of or reliance on any such content, goods, or services that are available on or through such sites or resources.



Features in This Release

This HBA consists of a single-slot PCI-X bus expansion board that connects to one or two FC optical media busses. Each channel of the host adapter can act as either an initiator or target. The two channels operate independently; each supports a separate FC bus operating at 4.25 Gbits/sec. Each channel is also backward-compatible with 2.125 Gbits/sec and 1.0625 Gbits/sec FC busses.

One or two Small-Form Factor (SFF) LC-duplex connectors are used to connect to the external FC busses. The FC bus operates in short-wave, multi-mode. One ISP2422 processor is used to support the two independent FC busses.

Supported Operating Systems

You can use the Sun StorageTek Enterprise PCI-X 4Gb FC Single and Dual Port HBA with the following operating systems (OSs):

To use the adapter with these OSs, you must use the Sun driver as described in Solaris 8, 9, and 10 Operating Systems.

To use the adapter with these OSs, you must use the QLogic driver as described inRed Hat Enterprise Linux and SuSE Linux Enterprise Server Systems.

To use the adapter with this OS, you must use the QLogic driver as described in Windows 2000 and Windows Server 2003 Systems.


Solaris 8, 9, and 10 Operating Systems

This section contains the following information about using the Sun StorageTek Enterprise PCI-X 4Gb FC Single and Dual Port HBA with the Solaris OS:

Software Component Patches and Packages

After you have completed the hardware installation and powered on the system, follow the instructions in this section to install the HBA driver with the Solaris 8, 9, and 10 Operating System (OS) (SPARC and X64/x86 Platform Edition).


procedure icon  Installing the Solaris Recommended Patch Cluster for Solaris 8, 9 and 10 OSs

To downlod the Solaris recommended patch cluster, follow these steps:

1. To Download the Solaris Patch Cluster, go to the SunSolve site at:

http://www.sunsolve.sun.com

2. Click on Patches and Updates

3. Click on Recommended and Security Patches.

4. Select and download one of the following:

Install this patch cluster before installing the SAN packages and patches or qlc driver patch.

Installing the HBA Driver Patches and Packages

The following qlc driver patches and packages are needed to support the HBA:


TABLE 1

Operating Sytstem

Patch Number

Location

Patch or Package Name

Solaris 10 03/05

SPARC

 

119130-13 or higher

SunSolve Online:

http://sunsolve.sun.com

qlc driver

Solaris 10 03/05

x86

 

119131-13 or higher

SunSolve Online:

http://sunsolve.sun.com

qlc driver

Solaris 8 02/04

and

Solaris 9 04/04

SPARC

SAN4.4.8 or higher

http://www.sun.com/storage/san

SAN 4.4.8


Diagnostic Support

The following SunVTS patches are needed to perform the diagnostic test for the HBA:


TABLE 2

Operating Sytstem

Patch Number

Location

Patch or Package Name

Solaris 10 03/05

SPARC

 

120965-01 or higher

SunSolve Online:

http://sunsolve.sun.com

SunVTS 6.0PS3 qlctest

Solaris 10 03/05

x86

 

120966-01 or higher

SunSolve Online:

http://sunsolve.sun.com

SunVTS 6.0PS3 qlctest

Solaris 8 02/04

Solaris 9 04/04

SPARC

120967-01 or higher

SunSolve Online:

http://sunsolve.sun.com

SunVTS 5.1PS10 qlctest


System Requirements

The following hardware and software are qualified with the Solaris 8, 9, and 10 OS.

Minimum OS Levels

 

 

 

 

 

Host Platform Support

Storage System Support

 

 

 

 

 

Fibre Channel Switch Support

FC switch support is shown in TABLE 3.


TABLE 3 Fibre Channel Switch Support

Switch

QLogic SANbox 5200 2 Gb switch

Sun StorEdge Network 2 Gb switch

Sun StorEdge Network 2 Gb Brocade SilkWorm 3200 and 3800 switches

Sun StorEdge Network 2 Gb Brocade SilkWorm 3250 and 3850 switches

Sun StorEdge Network 2 Gb Brocade SilkWorm 3900 switch

Sun StorEdge Network 2 Gb Brocade SilkWorm 12000 and 24000 Core Fabric switches

Sun StorEdge Network 4 Gb Brocade SilkWorm 4100 switch

Sun StorEdge Network 4 Gb Brocade SilkWorm 48000 and 200E

Sun StorEdge Network 2 Gb McDATA Sphereon 4300 switch

Sun StorEdge Network 2 Gb McDATA Sphereon 4500 switch

Sun StorEdge Network 2 Gb McDATA Intrepid 6064 director

Sun StorEdge Network 2 Gb McDATA Intrepid 6140 director


Known Issues and Bugs

The following bugs are under investigation at the time of the release:

Workaround: On a dual-port HBA, run qlctest on only one port at a time.

Workaround: Insert a loopback plug or cable.

Workaround: Disable 'Online Selftest' in qlctest 'Test Parameter Options' menu.

Workaround: On a dual-port HBA, run qlctest on only one port at a time.

Workaround: Disable 'Mailbox Loopback Test' in qlctest 'Test Parameter Options' menu.


Red Hat Enterprise Linux and SuSE Linux Enterprise Server Systems

The Linux Drivers required to run the Sun StorageTek Enterprise PCI-X 4 Gb FC Single and Dual Port HBAs with the Linux OS are available for download at the Sun designated page at:

http://www.qlogic.com/support/sun_page.html

Drivers that support the Linux 2.4 and 2.6 kernels are provided. The Linux 2.4 kernel is used in Red Hat Enterprise Linux (RHEL) 3 and SuSE Linux Enterprise Server (SLES) 8. The Linux 2.6 kernel is used in RHEL 4 and SLES 9. Consult the Sun hardware platform documentation to verify which Linux releases are supported.

The necessary utilities to perform diagnostics and HBA management are packaged in the Application Kit and are available for download at this Web page. The SANsurfer utility performs simple diagnostics, firmware maintenance, general HBA management and configuration functions.

This section contains the following information about using the StorageTek Enterprise PCI-X 4 Gb FC Single and Dual Port HBAs in Red Hat Enterprise Linux and in SuSE Linux Enterprise operating systems:

System Requirements

The following hardware and software are qualified with the Red Hat Enterprise Linux and with the SuSE Linux Enterprise server systems:

Minimum OS Levels

Host Platform Support

Storage System Support

The storage systems supported for the RHEL and SLES operating systems are the same as those listed for Solaris 8, 9, and 10 Operating Systems.

Fibre Channel Switch Support

FC switch support is shown in TABLE 3. In other words, it is exactly the same for Red Hat Enterprise Linux and SuSE Linux Enterprise Server Systems as it is for the Solaris 8, 9, and 10 OS.

Known Issues and Bugs

The following bugs are under investigation at the time of the release:

If the serial port is connected, 10 to 15 seconds after starting a mt test script, the system panics and then reboots. If not, the system hangs and needs to be power-cycled.

Workaround: It is recommended that you not access tape using this HBA on Linux 2.4 kernels.


Windows 2000 and Windows Server 2003 Systems

The host adapter device driver for running the Windows 2000 and Windows Server 2003 OS is available for download at the QLogic website:

http://www.qlogic.com/support/sun_page.html.

This section contains the following information about using the StorageTek Enterprise PCI-X 4 Gb FC Single and Dual Port HBAs in Windows 2000 and Windows Server 2003 operating systems:

 

System Requirements

The following hardware and software are qualified with the Windows 2000 and Windows Server 2003 OS:

Host Platform Support

Storage Systems Support

The storage systems supported for the Windows 2000 and the Windows \Server 2003 operating systems are the same as those listed for Solaris 8, 9, and 10 Operating Systems.

Fibre Channel Switch Support

The FC switches supported for the Windows 2000 and Windows Server 2003 operating systems are the same as those listed for the Solaris 10 OS in TABLE 3.

Known Issues and Bugs

There are no known HBA issues or bugs for the Windows 2000 and Windows Server 2003 operating systems at this time.


Service Contact Information

If you need help installing or using this product in the United States, call
1-800-USA-4SUN, or go to:

http://www.sun.com/service/contacting/index.html