Index |
/dev/dsk entry, 1
/dev/rdsk entry, 1
ACSAPI interface, 1
ACSLS shared drives, 1
ACSLS software, 1
additional parameters field, 1
configuration, 1
diagnostic information, 1
overview, 1
parameters file, 1
group, 1
AMD server platforms, 1
applications, 1
routines, 1
archive media, 1
archive(1) command, 1
archive_audit(1M) command, 1, 2
commands, 1
defaults, 1
deleting entries, 1
wait mode, 1
archiver(1M) command, 1
archiver.cmd file, 1
disk archiving, 1
overview, 1
verifying, 1
archiver.sh(1M) command, 1
archiving to disk, 1
auditslot(1M) command, 1
auth_attr file, 1
adding slots, 1
ADIC/Grau, 1
catalog, 1
commands, 1
drive order, 1
Fujitsu LMF, 1
IBM 3494, 1
labeling removable cartridges, 1
shared drives, 1
Sony, 1
StorageTek ACSLS-attached, 1
upgrade, 1
automatically using cron, 1
automatically using File System Manager, 1
configuration files, 1
data, 1
file systems, 1
barcodes, 1
browser requirements for File System Manager, 1
cartridge slots, adding, 1
labeling, 1
loading, 1
unloading, 1
catalog, automated library, 1, 2, 3, 4, 5, 6
cataloging optical disks, 1
cfgadm(1M) command, 1
checksum attribute, 1
chmed(1M) command, 1
chmod(1) and chown(1) commands, 1
cleandrive(1M) command, 1
file system, 1
general system administrator, 1
maintenance, 1
user, 1
adding administrator group, 1
devices, 1
system logging, 1
configuration files, 1
backing up, 1
cost.conf file, 1
crontab file, 1
fsmgmtd, 1
sam-rpcd, 1
sam-stkd, 1
ssi_so, 1
DAS server, 1
dd(1M) command, 1
defaults (setting system defaults), 1
alerts, 1
delay directive, defaluts.conf, 1
device state field, 1
configuration, 1
create Sun StorEdge SAM-FS, 1
inventory, 1
set state of, 1
supported, 1
tape drive types, 1
timing values, 1
types, 1
unload values, 1
verifying configuration, 1
dfstab file, 1
created during installation, 1
disk archive sets, 1
disk cache, configuration examples, 1
DLT libraries, 1
dmpshm(1M) command, 1
documentation, 1
magneto-optical libraries, 1, 2
removable media, 1
tape libraries without front panel, 1
drives, 1, 2
du(1) command, 1
dump files, 1
dump_cat(1M) command, 1
DZC-8000S Application Interface Library, 1
EFI labels, 1
equipment identifier field, 1
equipment ordinal field, 1
equipment type field, 1
exarchive(1M) command, 1
family set field, 1
fault_log file, 1
faults file, 1
commands, 1
initializing, 1
unmounting, 1
File System Manager, 1
ACSLS libraries, 1
adding devices to samst.conf, 1
adding users, 1
assigning privilege levels, 1
automatic backups, 1
creating an mcf file, 1
creating the archiver.cmd file, 1
creating the samfs.cmd file, 1
requirements, 1
running samfsdump(1M), 1
session timeout, 1
stopping archiving activity, 1
uninstalling, 1
unmounting a file system, 1
using, 1
find(1) command, 1
format(1M) command, 1
fsck(1M) command, 1
fsmadm(1M) command, 1
fsmgmtd daemon, 1
fsmgr_uninstall file, 1
configuration, 1
fujitsulmf interface, 1
overview, 1
parameters file, 1
fuser(1M) command, 1
grauaci interface, 1
group file, 1
groupadd(1M) command, 1
AMD and SPARC platforms, 1
hosts file, 1
catalog file, 1
configuration, 1
parameters file, 1
idling archiver activity, 1, 2
init(1) command, 1
initializing the environment, 1
inittab file, 1
directories created, 1
files created, 1
files modified, 1
requirements, 1
site-created files, 1
installing the software, 1
itemize(1M) command, 1
kill(1) command, 1
labeling media, 1
labels directive, defaults.conf, 1
unloading, 1
libsam and libsamrpc libraries, 1
licensing, 1
general information, 1
load_notify.sh(1M) script, 1
log files, 1
log_rotate.sh(1M) command, 1, 2
logging, enabling, 1
magneto-optical drive, 1
magneto-optical library, 1
maintenance commands, 1
Management Information Base (MIB), 1
MANPATH variable, 1
examples, 1
fields, 1
md devices, 1
media, labeling, 1
message logging, 1
dump files, 1
point, 1
move(1M) command, 1
ms devices, 1
mt(1) command, 1
mtlib utility, IBM, 1
name_to_major file, 1
network attached automated library catalog, 1
network attached libraries, 1
mcf file, 1
installing on Sun StorEdge SAM, 1
verifying requirements, 1
NFS mount parameters, 1
NFS sharing file systems, 1
online documentation, 1
operating system requirements, 1
parameter files, network attached automated libraries, 1
PATH variable, 1
PetaSite controller, 1
pkgadd(1M) command, 1, 2, 3, 4, 5
preview.cmd file, 1
probe-scsi-all command, 1
propagating mcf file changes, 1, 2
ps(1) command, 1
PSC configuration file, 1
rearch(1M) command, 1
rebooting, 1
recover.sh(1M) script, 1
recycler.cmd file, 1
packages, 1
Release Notes, 1
release(1) command, 1
releaser.cmd file, 1
disabling, 1
enabling, 1
facility, 1
Remote systems using NFS, 1
removable media, 1
attaching, 1
removing damaged files, 1
request(1) command, 1
reserve(1M) command, 1
restore.sh(1M) script, 1
restoring a file system, 1
robot parameters files, 1
rpcbind service, 1
samaio file, 1
samaio.conf file, 1
sambcheck(1M) command, 1
samchaid(1M) command, 1
samcmd(1M) command, 1
samcmd(1M) idle command, 1
samcmd(1M) unavail command, 1
samcmd(1M) unload command, 1
samd(1M) config command, 1
samdev command, 1
samexplorer(1M) command, 1
samexport(1M) command, 1
samfs file, 1
samfs file system type, 1
samfsck(1M) command, 1
samfsconfig(1M) command, 1
samfsdump(1M) command, 1, 2, 3
samfsrestore(1M) command, 1, 2, 3
samfstyp(1M) command, 1
samgrowfs(1M) command, 1
samioc file, 1
samioc.conf file, 1
samncheck(1M) command, 1
samquota(1M) command, 1
samquotastat(1M) command, 1
sam-recycler(1M) command, 1
sam-releaser(1M) command, 1
overview, 1
requirements, 1
sam-rpcd daemon, 1
samst file, 1
sam-stkd daemon, 1
samtrace(1M) command, 1
samunhold(1M) command, 1
site-customizable scripts, 1
sdu(1) command, 1
segment(1) command, 1
AMD and SPARC platforms, 1
set_state(1M) command, 1
setfa(1) command, 1
sfind(1) command, 1
share(1M) command, 1
shared drives, 1
sharing a file system using NFS, 1
showqueue(1M) command, 1
slots, adding, 1
sls(1) command, 1
commands, 1
defaults, 1
disk space needs, 1
files created, 1
installation, 1
installing, 1
licensing, 1
logging, 1
obtaining packages, 1
overview, 1
site-created files, 1
stopping, 1
upgrading, 1
patches, 1
support, 1
upgrading, 1
Sony network attached automated library
overview, 1
parameters file, 1
SPARC server platforms, 1
squota(1) command, 1
ssi.sh script, 1
ssi_so daemon, 1
ssum(1) command, 1
adding tape devices, 1
handling errors, 1
stage(1) command, 1
stageback.sh(1M) command, 1, 2
star(1M) command, 1
StorADE, 1
storage space requirements, 1, 2
StorageTek ACSLS-attached automated library
catalog file, 1
overview, 1
configuration, 1
installation, 1
overview, 1
SUNW.SUNWsamfs.sysevent.conf file, 1
SUNWsamfs package, 1
SUNWsamfs packages, 1
syslog(3) interface, 1
syslog.conf file, 1
system administrator commands, 1
tape drive types, verifying, 1
adding slots, 1
adding to the st.conf file, 1
ADIC/Grau, 1
attaching, 1
barcodes, 1
catalog, 1
commands, 1
drive order, 1
Fujitsu LMF, 1
IBM 3494, 1
labeling removable cartridges, 1
shared drives, 1
Sony, 1
StorageTek ACSLS-attached, 1
types, 1
verifying configuration, 1
tape label, 1
tapealert_log file, 1
tapealert_trap file, 1
tarback.sh(1M) script, 1
touch(1) command, 1
trace_rotate(1M) command, 1
st.conf file, 1
umount(1M) command, 1
unarchive(1M) command, 1
undamage(1M) command, 1
unload directive, defaults.conf, 1
unload(1M) command, 1
unrearch(1M) command, 1
unreserve(1M) command, 1
unshare(1M) command, 1
Sun Solaris OS, 1
upgrading AMD and SPARC server platforms, 1
upgrading hardware, 1
upgrading Sun StorEdge SAM-FS software, 1
upgrading tape drives, 1
user commands, 1
user_attr file, 1
useradd command, 1
version 1 and 2 superblock, 1
editing, 1
fields, 1
unmounting a file system, 1
Copyright © 2006, Sun Microsystems, Inc. All Rights Reserved.