About This Documentation (PDF and HTML)
Overview of the Sun Blade Storage Module M2
Installing the Storage Module Into the Chassis
Assigning and Managing Storage
Overview of the Sun Blade Storage Module M2 Product Notes
Supported Firmware, Hardware and Software
Solaris Operating System Issues
Performing Maintenance and Hot Plug Actions
Importing Existing Virtual Drives to a Replacement REM
Storage Module Sensors and Indicators
Introduction to the Sun Blade Storage Module M2
Maintaining the Sun Blade Storage Module M2
The following lists the release history of this documentation set:
July 2010, initial publication.
August 2010, information added for Sun Blade Storage Module M2 software release 1.0.1. This includes support for connecting a Sun Blade X6270 M2 server module with a Sun Storage 6Gb SAS REM HBA (SGX-SAS6-REM-Z) to the storage module.
November 2010, information added for Sun Blade Storage Module M2 software release 1.1. Added new OS support, CR 6981082, fix for CR 6971532.
December 2010, flash module (FMod) support removed from product (including 24 FMod slots on main board).
September 2011, information added for Sun Blade Storage Module M2 software release 1.2. Added new OS support. Added support for the Sun Blade T3–B1 server module. Mention of SSD support removed. Added support for new 300 and 600 GB hard disk drives. Added support for the Sun Blade 6000 Switched NEM 24p 10GbE.
January 2012. Updated physical dimension specifications in the Sun Blade Storage Module M2 Installation Guide and the Sun Blade Storage Module M2 Service Manual.