| Skip Navigation Links | |
| Exit Print View | |
|
Sun Blade Storage Module M2 Product Documentation |
About This Documentation (PDF and HTML)
Overview of the Sun Blade Storage Module M2
Installing the Storage Module Into the Chassis
Assigning and Managing Storage
Overview of the Sun Blade Storage Module M2 Product Notes
Supported Firmware, Hardware and Software
Solaris Operating System Issues
Performing Maintenance and Hot Plug Actions
Importing Existing Virtual Drives to a Replacement REM
Displaying Sensor and Indicator Information Using the CMM ILOM Web Interface
Displaying Sensor and Indicator Information Using the CMM ILOM CLI
Introduction to the Sun Blade Storage Module M2
Maintaining the Sun Blade Storage Module M2
The storage module includes several sensors and indicators that report on hardware conditions. Many of the sensor readings can trigger events, such as illuminating system indictor LEDs, shutting down the module for temperature and over-voltage conditions, and powering off the storage module.
Note - For information about how to obtain sensor readings or to determine the state of system indicators in CMM ILOM, refer to the Oracle Integrated Lights Out Manager (ILOM) CMM Administration Guide for Sun Blade 6000 and 6048 Modular Systems found in the Sun Blade 6000 Modular System documentation (http://docs.sun.com/app/docs/prod/blade.6000mod~blade6000ilom#hic)
The following sections describe the sensors and indicators that the CMM ILOM monitors for the Sun Blade Storage Module M2. Device-specific examples (hard disks, sensors and indicators) are shown using the CMM ILOM CLI.
|