Configuration Procedure

Using the Adaptec configuration utility:

• Configure each SCSI device to have a unique SCSI ID, and on the adapter's Advanced Configuration Options setup menu, set the Plug N Play SCAM Support option to Disabled.

• If there is more than one controller (or an embedded controller), try to use one IRQ per controller.

• Enable bus mastering for the slots with your host bus adapters, when the choice is given.

• For older disk drives, tape drives, and most CD-ROM devices, make sure the maximum SCSI data transfer speed is set to 5.0 Mbps.

• Enable support for disks larger than 1 Gbyte if applicable.