Solaris Gerätetreiber: |
adp |
Gerätetyp: |
SCSI-2 |
Adapter: |
Adaptec AHA-2940, AHA-2940W, AHA-2944W, AHA-3940, AHA-3940W |
Chips: |
Adaptec AIC-7850, AIC-7860, AIC-7870, AIC-7880, AIC-7895 |
Bustyp: |
PCI |
Die Plug N Play SCAM Supportoption wird nicht unterstützt.
Um die Adapter AHA-3940 oder AHA-3940W verwenden zu können, muss das Motherboard über ein BIOS verfügen, das den DEC PCI-to-PCI Bridge-Chip auf dem Host-Bus-Adapter unterstützt.
Auf Programmen der Benutzerebene sind auf einigen PCI-Systemen wie der Adaptec AHA-2940 oder AHA-2940W Karte Probleme aufgetreten. Dazu gehören auch folgende Motherboard-Modelle:
PCI-Motherboards mit einem 60-MHz Pentium Chip mit den PCI Chipsatznummern S82433LX Z852 und S82434LX Z850. Die Teilenummern der Intel Motherboards lauten AA616393-007 und AA615988-009.
PCI-Motherboards mit einem 90-MHz Pentium Chip mit den PCI Chipsatznummern S82433NX Z895, S82434NX Z895 und S82434NX Z896. Die Teilenummer des Intel Motherboards lautet 541286-005. (Manche Gateway 2000 Systeme verwenden dieses Motherboard.)
Das AA-619772-002 Motherboard mit 82433LX Z852 und 82434LX Z882 Chips versursacht zufällige Speicherinkonsistenzen. Geben Sie das Motherboard zwecks Austausch an den Händler zurück.
Wenn bei Programmen der Benutzerebene Probleme auftreten, deaktivieren Sie per BIOS Setup das Write-Back CPU Caching (oder alles Caching, wenn es für den Caching-Algorithmus keine Steuerung gibt).
Wenn der AHA-2940 SCSI Adapter das Plattenlaufwerk Quantum Empire 1080S HP 3323 SE oder andere SCSI-Platten nicht erkennt, verringern Sie die synchrone Transferrate auf dem Adaptec Controller auf 8 Mbps.
Der AHA-3940 wurde von Adaptec für bestimmte Systeme empfohlen, allerdings haben Tests gezeigt, das Solaris auf einigen dieser Systeme korrekt funktioniert und auf anderen nicht.
Verwenden des Adaptec Konfigurationsdienstprogramms:
Konfigurieren Sie alle SCSI-Geräte mit einer eindeutigen SCSI-ID und setzen Sie im Menü ,,Advanced Configuration Options" die Option ,,Plug N Play SCAM Support" auf ,,Disabled".
Wenn Sie über mehrere Controller (oder einen eingebetteten Controller) verfügen, verwenden Sie einen IRQ pro Controller.
Aktivieren Sie, wenn Sie dazu aufgeordert werden, das Bus Mastering für den/die Steckplätze mit Ihrem/ihren Host-Bus-Adpater(n).
Für ältere Platten- und Bandlaufwerke und die meisten CD-ROM-Geräte sollte die maximale SCSI-Datenübertragungsgeschwindigkeit auf 5 Mbps eingestellt sein.
Aktivieren Sie, falls zutreffend, die Unterstützung für Platten mit mehr als 1 GB.