The stereo connector allows connection of stereo goggles to the Elite3D Graphics Accelerator. The stereo connector for the Elite3D board is a seven-pin DIN connector as shown in Figure 7-1.
Table 7-6 lists the stereo cable signals.
Table 7-6 Elite3D Stereo Connector Signals
Pin |
Description |
---|---|
1 |
Ground |
2 |
No connection |
3 |
+12V |
4 |
STEREO signal |
5 |
No connection |
6 |
No connection |
7 |
No connection |
The STEREO signal is a TTL-level, 50 percent duty cycle signal that switches between left and right stereo shutters, as shown in Figure 7-2.
A stereo cable and goggles for use with the Elite3D Graphics Accelerator are available from the following source:
StereoGraphics Corporation 2171-H East Francisco Blvd. San Rafael, CA 94901 (415) 459-4500 FAX: 415-459-3020