C H A P T E R 2 |
Logging In to and Out of ILOM |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Getting Started Guide (820-5523) |
||
Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide (820-6412) |
||
The ILOM 3.0 Documentation Collection is available at: http://docs.sun.com/app/docs/prod/int.lights.mgr30#hic |
Use this chapter as a quick reference for the ILOM login and logout procedures. For additional information, refer to the initial login process and procedures as described in the Oracle Integrated Lights Out Manager (ILOM) 3.0 Getting Started Guide.
Prior to performing the procedures in this chapter, you should ensure that the following requirements are met.
Log In to ILOM Using the root User Account |
To log in to the ILOM web interface for the first time using the root user account, open a web browser and do the following:
1. Type http://system_ipaddress into the web browser.
If ILOM is operating in a dual-stack network environment, the system_ipaddress can be entered using either an IPv4 or IPv6 address format.
http://[fec0:a:8:b7:214:4fff:5eca:5f7e/64]
For more information about entering IP addresses in a dual-stack environment, see Network Addresses Accepted by ILOM. For help with diagnosing IPv4 and IPv6 connection issues, see Diagnosing IPv4 or IPv6 ILOM Connection Issues.
The web interface Login page appears.
2. Type the user name and password for the root user account:
The Version page in the web interface appears.
Set Up a User Account |
Once you are logged in to ILOM, you need to create a regular (non-root) user account. You will use this regular user account to configure ILOM settings for your system and environment.
Follow this step to set up a user account:
Set up a user account in one of these five classes of users:
You can create and configure with advanced roles up to 10 local user accounts or configure a directory service.
For information about setting up a user account, see Add User Accounts and Assign Roles.
Log In to ILOM as a User |
Use this procedure to log in to ILOM to verify that the user account or directory service is functioning properly.
Follow these steps to log in to ILOM using a non-root user account:
1. In the web browser, type http://system_ipaddress
The web interface Login page appears.
2. Type the user name and password of a user account that you previously configured.
The ILOM web interface appears, displaying the Version page.
Log Out of ILOM |
Click the Log Out button in the ILOM web interface.
The Log Out button is located in the top right corner of the web interface. Do not use the Log Out button on your web browser to exit ILOM.
Configure Banner Messages in ILOM |
1. Log in to the ILOM SP web interface or the CMM ILOM web interface.
2. In the ILOM web interface, click System Information --> Banner Messages.
3. In the Banner Message page, do the follow:
To create banner message to appear in a dialog box after logging in to ILOM. |
4. In the Login Message Acceptance check box, select the check box to enable the system to display the banner message(s).
After you have set up a user account or configured a directory service, you are now ready to configure ILOM. The remaining chapters in this Oracle ILOM 3.0 Web Interface Procedures Guide provide complete descriptions of the tasks you can perform to access ILOM’s functions.
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.