Configuration Assistant Phase
During this phase, the Configuration Assistant attempts to identify devices on the system.
Solaris Device Configuration Assistant
The Solaris(TM) 2.6 (Intel Platform Edition) Device Configuration
Assistant scans to identify the devices on the system, lists
identified devices, and enables you to boot the Solaris software
from a specified device. This program must be used whenever you
install the Solaris operating environment or change the hardware
on the system.
> To perform a full scan and identify all the devices on the system,
choose Continue.
> To perform a partial scan and identify only the automatically
detected devices, choose Partial Scan. (Choose Partial Scan if a
full scan has previously failed.)
F2_Continue F4_Partial Scan F6_Help
|
Scanning Devices Phase
During this phase, all devices connected to the system are scanned.
Scanning Devices
The system is being scanned to identify all devices on the system.
If the scanning stalls, press the system's reset button. When the
system reboots, choose Partial Scan or Help.
Building driver list --
| | | | | |
0 20 40 60 80 100 Please wait ...
|
Identifying Devices Phase
During this phase, all devices connected to the system are identified in this example.
Identified Devices
The following devices have been identified in this system. To
identify devices that on not in this list, choose Device Tasks.
ISA: Bidirectional parallel port
ISA: Floppy disk controller
ISA: IDE controller
ISA: Intel EtherExpress network card
ISA: Motherboard
ISA: PS/2 mouse
ISA: Serial controller
ISA: Serial controller
ISA: System keyboard
ISA: VGA Compatible Display Adapter
F2_Continue F3_Back F4_Device Tasks F5_Boot Solaris
|
- © 2010, Oracle Corporation and/or its affiliates