Issue |
What to Do |
How to add an ISA device to an EISA machine. |
Run the machine's EISA configuration utility (ECU) so the system knows about the new ISA card and the resources it uses. |
Issue |
What to Do |
How to go between Plug and Play mode and Legacy mode. |
Set the switch to Plug and Play mode, and plug the device into the system. The software will configure it automatically. |
System and device parameters for Micro Channel devices are software-configured by utilities on a Reference Diskette. This diskette contains a menu-driven program that leads you through the configuration of the system.
Issue |
What to Do |
How to control the assignments of IRQs to PCI devices. |
In the chipset configuration of the system, verify that an IRQ is enabled for PCI bus use. After checking IRQs used by ISA devices, assign as many available IRQs to PCI devices as possible so that the PCI bus can resolve device conflicts. |
Issue |
What to Do |
How to use the system BIOS to change device settings. |
Refer to the manufacturer's documentation for the method of accessing the BIOS setup for your system and the features it provides. |
How to set up a cachable region in system memory for American Megatrends, Inc. (AMI) BIOS. |
For the best performance, make the cachable region equal to the total memory installed in the system.
|