DPT PM-2024, PM-2044W, PM-2044UW, PM-2124, PM-2124W, PM-2144W, PM-2144UW SCSI and PM-3224, PM-3224W, PM-3334W, PM-3334UW SCSI RAID HBAs

Preconfiguration Information

• DPT PM-3224 only: The EPROM should not be earlier than version 7A.

• DPT PM-2024 and PM-2124 only: The EPROM should not be earlier than version 6D4.

• Don't use an adapter with a SmartROM earlier than version 3.B.

• Ensure that the controller board is installed in a PCI bus-mastering slot.

• If the firmware version of the controller is earlier than 7A, or if your computer memory is ECC or does not check parity, disable PCI parity checking.

Known Problems and Limitations

During the system boot, if you see a message that a DPT controller driver cannot be installed, the motherboard installed in your system probably has ECC memory or does not check parity; disable PCI parity checking.

Supported Settings