o IRQ Level: |
Any legal value between 9 and 15 |
o I/O Address: |
z000 (where z is a slot number from 1 to 8) |
o DMA Channel: |
6 |
The board must be in slot 1 through 8; otherwise the Solaris software will not boot.
Set the following parameters to Enhanced Mode:
Host Adapter Interface Mode
Standard Mode Resource Selection I/O Port Definition
Standard Mode Resource Selection DMA Channel Definition
Enable Synchronous Negotiation for all targets unless you are running the Adaptec AHA-1740 in Enhanced Mode; in that case, you must use the EISA configuration utility to disable Synchronous Negotiation for the NEC Intersect CD-ROM 74 or 84.