Special Cases

Adding a Dell SCSI Array Controller as a Secondary Controller

If there is already a primary (boot) controller and you are now adding a Dell SCSI Array controller as a secondary controller:

• Make sure it is properly installed in any slot between 1 and 8.

• Do not use targets 0 or 7 for any SCSI device.

• Enable the DSA 16-bit ROM BIOS. On some systems, this may be called the Option ROM Address.

Dell Disk Manager Setup

If your disk did not come from Dell, use the Dell Disk Manager Setup to low-level format the hard disk before completing these steps:

1. Set up one or more composite drives with the Dell DOS software array manager program.

2. Select any RAID level supported by the controller.

   ---

   Note -

   All disk drives accessible by the Solaris software must be composite drives, composed of one or more physical drives.

   ---

3. Save your configuration changes.