If your card supports Plug and Play, your device resources are configured automatically. Use the following settings for devices that don't support Plug and Play.
o IRQ Level: |
9, 10, 11, 12 |
o I/O Address: |
0x140, 0x340 |
o DMA Channel: |
Disabled |
The SCSI subsystem of the Sound Blaster 16 SCSI-2 needs an I/O (port) address and an IRQ that are distinct from those of the audio subsystem. The resistors on the Sound Blaster 16 SCSI-2 cannot be removed. Set the jumpers for the SCSI interface, not for the audio.