Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM 用户指南概述
Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM 的特性
通过 Virtualized M2 NEM 10 千兆位以太网端口引导
在 Solaris SPARC 或 x86 平台上安装和配置 hxge 驱动程序
在 VMware ESX Server 平台上安装和配置驱动程序
使用 ndd 实用程序获取或设置 hxge 设备的参数之前,必须为该实用程序指定设备实例。
# ifconfig -a hxge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 192.168.1.29 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:4f:62:1:3
# ndd -get /dev/hxge0 ? ? (read only)instance (read only) rxdma_intr_time (read and write) rxdma_intr_pkts (read and write) class_opt_ipv4_tcp (read and write) class_opt_ipv4_udp (read and write) class_opt_ipv4_ah (read and write) class_opt_ipv4_sctp (read and write) class_opt_ipv6_tcp (read and write) class_opt_ipv6_udp (read and write) class_opt_ipv6_ah (read and write) class_opt_ipv6_sctp (read and write)
请注意,只读参数不能更改。
以下是 rxdma_intr_time 参数示例:
# ndd -get /dev/hxge0 rxdma_intr_time 8
以下是 rxdma_intr_time 参数示例。它将 rxdma_intr_time 参数从 0x8 更改为 0x10:
# ndd -set /dev/hxge0 rxdma_intr_time 0x10 # ndd -get /dev/hxge0 rxdma_intr_time 10