Skip Navigation Links | |
Exit Print View | |
Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Product Notes Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Documentation Library |
About This Documentation (PDF and HTML)
Overview of the Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM Product Notes
Supported Software and Firmware
Sun Blade 6000 Chassis and Midplane
Hardware and Networking Issues
Packet Drop at 1Gb with 100m Cable (6879222)
Special Instructions for Network PXE Booting for the Sun Blade X3-2B Server (7183913)
ILOM Failover and Private Mode Cannot Be Enabled Simultaneously (6911661)
Cannot Set NEM SP IP Address When NEM Is Powered Off (6938660)
ipmitool Command Fails (6940791)
Prepare-to-Remove and Return-to-Service Does Not Work on NEM ILOM (6948103)
Green Rear SAS Link LEDs All Turn On When Setting Prepare-to-Remove (6950981)
NEM SAS Firmware Updates Must be Performed from the CMM and Not the NEM SP (7020854)
Oracle Linux: Server Module Might Hang When NEM Replaced Repeatedly (6935520)
Oracle Solaris: Virtualized M2 NEM hxge 10 GbE Driver Can Hang Under High Stress (6932684)
Linux: Configuring PCIe Hot Plug in Linux (7075694)
Windows: Incorrect Driver Version Displayed When Driver File Properties is Viewed (7069358)
The Sun Blade Storage Module M2 is the only storage module that is supported for use with the Virtualized M2 NEM.
The following table lists the supported server modules and associated FEMs and REMs that are supported for use with the Virtualized NEM M2:
|
Note - The Sun Storage 6Gb SAS REMs include software and firmware. To download the latest updates for these REMs, go to the LSI Support site.
Note - The Sun Blade X4-2B Server Module supports Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM with very limited conditions including support for 1GbE ports only. 10GbE ports are not operational.