Skip Navigation Links | |
Exit Print View | |
Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Product Notes Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Documentation Library |
About This Documentation (PDF and HTML)
Overview of the Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM Product Notes
Supported Software and Firmware
Get Software and Firmware Downloads
Hardware and Networking Issues
Packet Drop at 1Gb with 100m Cable (6879222)
Special Instructions for Network PXE Booting for the Sun Blade X3-2B Server (7183913)
ILOM Failover and Private Mode Cannot Be Enabled Simultaneously (6911661)
Cannot Set NEM SP IP Address When NEM Is Powered Off (6938660)
ipmitool Command Fails (6940791)
Prepare-to-Remove and Return-to-Service Does Not Work on NEM ILOM (6948103)
Green Rear SAS Link LEDs All Turn On When Setting Prepare-to-Remove (6950981)
NEM SAS Firmware Updates Must be Performed from the CMM and Not the NEM SP (7020854)
Oracle Linux: Server Module Might Hang When NEM Replaced Repeatedly (6935520)
Oracle Solaris: Virtualized M2 NEM hxge 10 GbE Driver Can Hang Under High Stress (6932684)
Linux: Configuring PCIe Hot Plug in Linux (7075694)
Windows: Incorrect Driver Version Displayed When Driver File Properties is Viewed (7069358)
Software release 1.2 contains an update to the Virtualized NEM SAS expander and Oracle ILOM firmware, and additional operating system drivers.
The following is updated in software 1.2:
SAS expander firmware: 5.3.8.0
Oracle ILOM firmware: 3.0.14.19 r61829
Added support for the following operating systems:
Oracle Solaris 10 9/10
Oracle Linux (5.6, 6.0, 6.1), RHEL (5.6, 6.0, 6.1), Windows Server 2008 R2 SP1. Drivers are available as part of the Virtualized NEM Software Release 1.2, see Get Software and Firmware Downloads.
VMware 4.1 (obtain the drivers from the VMware download site.