Skip Navigation Links | |
Exit Print View | |
Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module User's Guide Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Documentation Library |
About This Documentation (PDF and HTML)
Overview of Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM User's Guide
Features of the Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM
Performing Hot Plug Insertion and Removal
How to Prepare SAS Interfaces for Hot Plug Removal
Restoring SAS Configurations After NEM Installation
Saving the Zoning Configuration to a Backup File Using the CMM ILOM
How to Save the Zoning Configuration to a Backup File Using the CMM CLI
Recovering Zoning Configurations
How to Recover Zoning Configurations Using the Web Interface
How to Recover Zoning Configurations Using the CLI
Installing or Replacing the Virtualized M2 NEM
Installing and Removing SFP+ Optical Transceiver Modules
Booting Over the Virtualized M2 NEM 10-Gigabit Ethernet Port
Booting over the Network With an x86 Blade Server
Booting over the Network With a SPARC Blade Server
Installing and Configuring the hxge Driver on a Solaris SPARC or x86 Platform
How to Configure the Network Host Files
Configuring the hxge Device Driver Parameters
Configuring the Jumbo Frames Feature
Installing and Configuring the hxge Driver on a Linux Platform
Installing and Removing the Driver on a Linux Platform
Configuring the Network Interface
Checking and Testing the hxge Device
Changing the hxge Driver Configuration
Installing and Configuring Drivers on a Windows Platform
Installing Drivers on a Windows Platform
Installing and Configuring Drivers on a VMware ESX Server Platform
Installing the ESX Server Drivers on an Existing ESX Server
Installing the ESX Server Drivers With a New ESX Installation
Configuring the Virtual NEM M2 Network Adapters
Accessing ILOM Documentation and Updates
Enabling Private and Failover Mode
Before You Begin
Create and save the storage access configuration for the chassis using the instructions in the Sun Blade Zone Manager section of the Oracle Integrated Lights Out Manager (ILOM) CMM Administration Guide.
Make sure that you have permissions for one of the following roles: Admin, User Management, Console, Reset and Host Control, and Read Only (a,u,c,r,o). These roles are required in order to perform a complete backup of the ILOM SP configuration.
http://chassis_sp_ipaddress/
Where chassis_sp_ipaddress is the IP address of your chassis CMM.
The ILOM login page appears.
The CMM ILOM main page is displayed.
The CMM maintenance sub-tabs are displayed
The Backup/Restore page is displayed.
For complete instructions on using ILOM Backup/Restore, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide.