How to Add a Disk Set to a Zone Cluster (Solaris Volume Manager)

Perform this procedure to add an entire Solaris Volume Manager disk set to a zone cluster.

1. Become superuser on a node of the global cluster that hosts the zone cluster.

   You perform all steps of this procedure from a node of the global cluster.

2. Identify the disk set to add to the zone cluster and determine whether it is online.

   phys-schost# cldevicegroup status

3. If the disk set that you are adding is not online, bring it online.

   phys-schost# cldevicegroup online diskset

4. Determine the set number that corresponds to the disk set to add.

   phys-schost# ls -l /dev/md/diskset lrwxrwxrwx 1 root root 8 Jul 22 23:11 /dev/md/diskset -> shared/setnumber

5. Add the disk set for use by the zone cluster.

   You must use a separate add device session for each set match= entry.

   ---

   Note –

   An asterisk (*) is used as a wildcard character in the path name.

   ---

   phys-schost# clzonecluster configure zoneclustername clzc:zoneclustername> add device clzc:zoneclustername:device> set match=/dev/md/diskset/*dsk/* clzc:zoneclustername:device> end clzc:zoneclustername> add device clzc:zoneclustername:device> set match=/dev/md/shared/setnumber/*dsk/* clzc:zoneclustername:device> end clzc:zoneclustername> verify clzc:zoneclustername> commit clzc:zoneclustername> exit

   match=/dev/md/diskset/*dsk/*

   Specifies the full logical device path of the disk set

   match=/dev/md/shared/N/*dsk/*

   Specifies the full physical device path of the disk set number

6. Reboot the zone cluster.

   The change becomes effective after the zone cluster reboots.

   phys-schost# clzonecluster reboot zoneclustername

Example 7–8 Adding a Disk Set to a Zone Cluster

The following example adds the disk set oraset to the sczone zone cluster. The set number of the disk set is 3.

phys-schost-1# clzonecluster configure sczone
clzc:sczone> add device
clzc:sczone:device> set match=/dev/md/oraset/*dsk/*
clzc:sczone:device> end
clzc:sczone> add device
clzc:sczone:device> set match=/dev/md/shared/3/*dsk/*
clzc:sczone:device> end
clzc:sczone> verify
clzc:sczone> commit
clzc:sczone> exit

phys-schost-1# clzonecluster reboot sczone