The following steps provide the general steps for backing up file systems using the ufsdump command. The examples show specific uses of options and arguments.
Become superuser.
Bring the system to run level S (single-user mode).
# shutdown -g30 -y |
[Optional] Check the file system for consistency with the fsck command.
Running the fsck -m command checks for consistency of file systems. For example, power failures can leave files in an inconsistent state. For more information on the fsck command, see Chapter 31, Checking File System Integrity.
# fsck -m /dev/rdsk/ device-name |
If you need to back up file systems to a remote tape drive:
On the system to which the tape drive is attached (the tape server), add the following entry to its /.rhosts file.
host root |
host |
Specifies the name of the system on which you will run ufsdump to perform the backup. |
On the tape server, verify that the host added to the /.rhosts file is accessible through the name service.
Identify the device name of the tape drive.
The default tape drive is /dev/rmt/0.
Insert a tape that is not write protected into the tape drive.
Back up file systems using the ufsdump command.
Use the following table to select the most common options and arguments for the ufsdump command. See Chapter 36, The ufsdump and ufsrestore Commands (Reference) for other options and arguments.
To ... |
Use This Option or Argument ... |
For Example ... |
See ... |
---|---|---|---|
Do a full backup |
0 option |
ufsdump 0ucf /dev/rmt/0 / | |
Do an incremental backup |
1-9 option |
ufsdump 9ucf /dev/rmt/0 / | |
Back up individual files |
Specify a file or directory |
ufsdump ucf /dev/rmt/0 /export/home/kryten |
|
Record dumps to /etc/dumpdates file |
-u option |
ufsdump 9ucf /dev/rmt/0 /export/home | |
Specify a cartridge tape |
-c option |
ufsdump 9ucf /dev/rmt/0 /export/home | |
Specify the tape drive |
-f dump-file |
ufsdump 9ucf /dev/rmt/0 /export/home | |
Back up local file systems to a remote system's tape device |
remote-system:dump-file |
ufsdump 0ucf pluto:/dev/rmt/0 /export/home |
"Example--Full Backup to Remote System (Solaris 2.6 Data to Solaris 7 System)" |
If prompted, remove the tape and replace with the next volume.
Label each tape with the volume number, level, date, system name, disk slice, and file system.
Bring the system back to run level 3 by pressing Control-d.
Verify the backup was successful by using the ufsrestore command to display the tape contents.
This command is described in Chapter 35, Restoring Files and File Systems (Tasks).
The following example shows a full backup of the root (/) file system to a QIC-150 tape (/dev/rmt/0).
# shutdown -g30 -y # ufsdump 0ucf /dev/rmt/0 / DUMP: Writing 63 Kilobyte records DUMP: Date of this level 0 dump: Tue Jun 09 10:14:54 1998 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rdsk/c0t3d0s0 (pluto:/) to /dev/rmt/0. DUMP: Mapping (Pass I) [regular files] DUMP: Mapping (Pass II) [directories] DUMP: Estimated 73708 blocks (35.99MB). DUMP: Dumping (Pass III) [directories] DUMP: Dumping (Pass IV) [regular files] DUMP: Tape rewinding DUMP: 73582 blocks (35.93MB) on 1 volume at 100 KB/sec DUMP: DUMP IS DONE DUMP: Level 0 dump on Tue Jun 09 10:14:54 1998 # ufsrestore tf /dev/rmt/0 2 . 3 ./lost+found 5696 ./usr 11392 ./export 17088 ./export/home 22784 ./export/root 28480 ./export/swap 34176 ./opt 39872 ./var 45568 ./var/sadm 51264 ./var/sadm/install 56960 ./var/sadm/install/admin 57011 ./var/sadm/install/admin/default . . . # (Press Control-d to bring system to run level 3) |
The following example shows an incremental backup of the root (/) file system to a 4-mm DAT tape (/dev/rmt/0).
# ufsdump 9ucf /dev/rmt/0 / DUMP: Writing 63 Kilobyte records DUMP: Date of this level 9 dump: Tue Jun 09 11:04:41 1998 DUMP: Date of last level 0 dump: Tue Jun 09 10:14:54 1998 DUMP: Dumping /dev/rdsk/c0t3d0s0 (pluto:/) to /dev/rmt/0. DUMP: Mapping (Pass I) [regular files] DUMP: Mapping (Pass II) [directories] DUMP: Mapping (Pass II) [directories] DUMP: Mapping (Pass II) [directories] DUMP: Mapping (Pass II) [directories] DUMP: Mapping (Pass II) [directories] DUMP: Estimated 1502 blocks (751KB). DUMP: Dumping (Pass III) [directories] DUMP: Dumping (Pass IV) [regular files] DUMP: Tape rewinding DUMP: 1384 blocks (692KB) on 1 volume at 51 KB/sec DUMP: DUMP IS DONE DUMP: Level 9 dump on Tue Jun 09 11:04:41 1998 # ufsrestore tf /dev/rmt/0 39872 ./var 62671 ./var/adm 39915 ./var/adm/sa 40018 ./var/adm/sa/sa09 62810 ./var/adm/sulog 62888 ./var/adm/pacct 91154 ./var/cron 91311 ./var/cron/log 5716 ./var/mail 5835 ./var/mail/adm 45585 ./var/spool 51388 ./var/spool/mqueue 91155 ./var/tmp . . . |
The following example shows a full backup of the /export/home/kryten directory to a 4-mm DAT tape.
# ufsdump 0ucf /dev/rmt/0 /export/home/kryten DUMP: Writing 63 Kilobyte records DUMP: Date of this level 0 dump: Tue Jun 09 11:12:44 1998 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rdsk/c0t3d0s7 (pluto:/export/home) to /dev/rmt/0. DUMP: Mapping (Pass I) [regular files] DUMP: Mapping (Pass II) [directories] DUMP: Estimated 232 blocks (116KB). DUMP: Dumping (Pass III) [directories] DUMP: Dumping (Pass IV) [regular files] DUMP: Tape rewinding DUMP: 124 blocks (62KB) on 1 volume at 8 KB/sec DUMP: DUMP IS DONE # ufsrestore tf /dev/rmt/0 2 . 2688 ./kryten 5409 ./kryten/letters 5410 ./kryten/letters/letter1 5411 ./kryten/letters/letter2 5412 ./kryten/letters/letter3 2689 ./kryten/.profile 8096 ./kryten/memos 30 ./kryten/reports 31 ./kryten/reports/reportA 32 ./kryten/reports/reportB 33 ./kryten/reports/reportC # |
The following example shows a full backup of a local /export/home file system on a Solaris 2.6 system to a tape device on a remote Solaris 7 system called pluto.
# ufsdump 0ucf pluto:/dev/rmt/0 /export/home # ufsdump 0ucf pluto:/dev/rmt/0 /export/home DUMP: Writing 63 Kilobyte records DUMP: Date of this level 0 dump: Tue Jun 09 13:54:27 1998 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rdsk/c0t3d0s7 (venus:/export/home) to pluto:/dev/rmt/0. DUMP: Mapping (Pass I) [regular files] DUMP: Mapping (Pass II) [directories] DUMP: Estimated 38310 blocks (18.71MB). DUMP: Dumping (Pass III) [directories] DUMP: Dumping (Pass IV) [regular files] DUMP: Tape rewinding DUMP: 38302 blocks (18.70MB) on 1 volume at 98 KB/sec DUMP: DUMP IS DONE DUMP: Level 0 dump on Tue Jun 09 13:54:27 1998 # # ufsrestore tf pluto:/dev/rmt/0 2 . 3 ./lost+found 34180 ./kryten 34182 ./kryten/.login 34183 ./kryten/.cshrc 51266 ./kryten/letters 51272 ./kryten/letters/letter1 51273 ./kryten/letters/letter2 51274 ./kryten/letters/letter3 57032 ./kryten/memos 74095 ./kryten/reports 74096 ./kryten/reports/reportA 74097 ./kryten/reports/reportB 74098 ./kryten/reports/reportC . . . # |
The following example shows a full backup of a local /export/home file system on a Solaris 7 system to a tape device on a remote SunOS 4.1.3 system (mars).
Notice the SunOS 4.x-style device name (/dev/rst0) used with the ufsdump command.
# ufsdump 0ucf mars:/dev/rst0 /export/home DUMP: Writing 63 Kilobyte records DUMP: Date of this level 0 dump: Fri Oct 24 15:06:47 1997 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rdsk/c0t3d0s7 (earth:/export/home) to (mars:/dev/rst0). DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 19574 blocks (9.56MB) DUMP: dumping (Pass III) [directories] DUMP: dumping (Pass IV) [regular files] DUMP: level 0 dump on Fri Oct 24 15:06:47 1997 DUMP: Tape rewinding DUMP: 19574 blocks (9.56MB) on 1 volume DUMP: DUMP IS DONE # ufsrestore tf mars:/dev/rst0 2 . 3 ./lost+found 2688 ./kryten 5409 ./kryten/letters 5410 ./kryten/letters/letter1 5411 ./kryten/letters/letter2 5412 ./kryten/letters/letter3 2689 ./kryten/.profile 8096 ./kryten/memos 30 ./kryten/reports 31 ./kryten/reports/reportA 32 ./kryten/reports/reportB 33 ./kryten/reports/reportC . . . # |
The following example shows a full backup of a local root (/) file system on a Sun 4.1.3 system (mars) to a remote tape device on a Solaris 7 system called pluto.
Notice that when you back up data on a system running SunOS 4.1.3 or a compatible version, you must use the dump command--not the ufsdump command.
# dump 0ucf pluto:/dev/rmt/0 / DUMP: Date of this level 0 dump: Tue Oct 21 16:05:19 1997 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rsd2a (/) to /dev/rmt/0 on host pluto DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 8686 blocks (4.24MB) on 0.10 tape(s). DUMP: dumping (Pass III) [directories] DUMP: dumping (Pass IV) [regular files] DUMP: level 0 dump on Tue Oct 21 16:05:19 1997 DUMP: Tape rewinding DUMP: 8690 blocks (4.24MB) on 1 volume DUMP: DUMP IS DONE # restore tf pluto:/dev/rmt/0 2 . 3 ./lost+found 3776 ./export 7552 ./home 11328 ./usr 15104 ./pcfs 3777 ./tftpboot 3778 ./tftpboot/tftpboot 3794 ./tftpboot/boot.sun4c.sunos.4.1.3 7553 ./etc 7554 ./etc/sendmail.cf 7555 ./etc/aliases 7556 ./etc/aliases.dir 7557 ./etc/aliases.pag 7558 ./etc/holidays 7559 ./etc/dumpdates . . . # |