SunVTS 3.0 Test Reference Manual

cdtest Command Line Syntax

/opt/SUNWvts/bin/cdtest standard_arguments -o dev=raw_device_name, mode=mode,read=random|sequential,data=%_of_data,vol=volume, audio=enable|disable,type=CD_type

Table 6-3 cdtest Command Line Syntax

Argument 

Explanation 

dev=raw_device_name

Specifies the name of the raw device to be tested.  

read=random|sequential

Indicates random or sequential read access. 

data=%_of_data

Sets the percentage of data to be tested; you can specify 0 to 100 percent.

vol=volume

Controls the audio volume; you can specify 0 through 255; the default is 255.

audio=enable|disable

Enables or disables the audio test; you must connect headphones or a speaker to the audio jack on the CD player to hear audio output. 

type=CD_type

Specifies the type of CD used for the test; the choices are: pdo, multi-session, sunos and other; the default is other.


Note -

64-bit tests are located in the sparcv9 subdirectory: /opt/SUNWvts/bin/sparcv9/testname. If a test is not present in this directory, then it may only be available as a 32-bit test. For more information refer to "32-Bit and 64-Bit Tests".