Use the probe subcommand to display information about all attached StorEdge A5000 disk arrays. The information displayed includes the logical path names, the WWNs, and the enclosure names.
StorEdge A5000
luxadm [ -v ] probe [-p]
Option |
Description |
---|---|
-p |
Also displays the physical path name |
# luxadm probe Found SENA Name:macs1 Node WWN:1234123412341234 Logical Path:/dev/es/ses0 Logical Path:/dev/es/ses1 #
# luxadm probe -p Found SENA Name:macs1 Node WWN:5080020000000598 Logical Path:/dev/es/ses0 Physical Path:/devices/sbus@1f,0/SUNW,socal@0,0/sf@1,0/ses@w5080020000000599,0:0 Logical Path:/dev/es/ses1 Physical Path:/devices/sbus@1f,0/SUNW,socal@0,0/sf@1,0/ses@w508002000000059a,0:0 Logical Path:/dev/es/ses2 Physical Path:/devices/sbus@1f,0/SUNW,socal@0,0/sf@1,0/ses@w5080020000000599,0:0 Logical Path:/dev/es/ses3 Physical Path:/devices/sbus@1f,0/SUNW,socal@0,0/sf@1,0/ses@w508002000000059a,0:0 #
Use the display subcommand to display enclosure specific or device specific data.
Enclosure data consists of enclosure environmental sense information and status for all subsystem devices including disks. Device data consists of inquiry, capacity, and configuration information.
StorEdge A5000
SPARCstorage Array
luxadm [ -v ] display enclosure[,dev]... | pathname...
Option/Argument |
Description |
---|---|
-v |
Displays mode sense data |
enclosure |
The enclosure name of a StorEdge A5000 |
dev |
The name of a specific disk in an enclosure |
pathname |
The physical or logical path name of a StorEdge A5000, SPARCstorage Array, or a specific disk in an array |
-p |
Displays performance information for the specified device or subsystem |
-r |
Displays error information for the specified device or subsystem |
# luxadm display macs1 (luxadm version: 1.36 98/03/10) SENA DISK STATUS SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN) 0 On (O.K.) 2000002037049dfa Not Installed 1 On (O.K.) 2000002037070608 On (O.K.) 200000203704a9e1 2 On (O.K.) 2000002037070498 On (O.K.) 200000203704a285 3 On (O.K.) 2000002037049f31 On (O.K.) 200000203704a252 4 On (O.K.) 20000020370705e1 On (O.K.) 2000002037049d61 5 On (O.K.) 2000002037049b32 On (O.K.) 200000203704a8f1 6 On (O.K.) 2000002037049987 On (O.K.) 200000203704a9de SUBSYSTEM STATUS FW Revision:1.05 Box ID:0 Node WWN:5080020000000598 Enclosure Name:macs1 Power Supplies (0,2 in front, 1 in rear) 0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02) Fans (0 in front, 1 in rear) 0 O.K.(rev.-05) 1 O.K.(rev.-00) ESI Interface board(IB) (A top, B bottom) A: O.K.(rev.-04) GBIC module (1 on left, 0 on right in IB) 0 O.K.(rev.-05) 1 O.K. (rev.-05): Not Installed B: O.K.(rev.-04) GBIC module (1 on left, 0 on right in IB) 0 O.K.(rev.-05) 1 O.K. (rev.-05): Not Installed Disk backplane (0 in front, 1 in rear) Front Backplane: O.K.(rev.-05) Temperature sensors (on front backplane) 0:42ºC 1:42ºC 2:40ºC 3:39ºC 4:40ºC 5:42ºC 6:43ºC (All temperatures are NORMAL.) Rear Backplane: O.K.(rev.-05) Temperature sensors (on rear backplane) 0:37ºC 1:37ºC 2:39ºC 3:39ºC 4:39ºC 5:40ºC 6:42ºC (All temperatures are NORMAL.) Interconnect assembly O.K.(rev.-03) Loop configuration Loop A is configured as a single loop. Loop B is configured as a single loop. Language USA English #
# luxadm display -r macs1 (luxadm version: 1.36 98/03/10) SENA Information for FC Loop on port 0 of FC100/S Host Adapter at path: /devices/sbus@1f,0/SUNW,socal@0,0:0 Version Resets Req_Q_Intrpts Qfulls Requests Sol_Resps Unsol_Resps Lips 1 0 0 0 0 0 0 2 Els_sent Els_rcvd Abts Abts_ok Offlines Onlines Online_loops 0 0 18 18 4 0 5 Information from sf driver: Version Lip_count Lip_fail Alloc_fail #_cmds Throttle_limit Pool_size 1 0 0 0 0 1024 1 TARGET ERROR INFORMATION: AL_PA Els_fail Timouts Abts_fail Tsk_m_fail Data_ro_mis Dl_len_mis Logouts 1 0 5 0 0 0 0 0 d2 0 2 0 0 0 0 0 ef 0 3 0 0 0 0 0 e8 0 0 0 0 0 0 0 e4 0 0 0 0 0 0 0 e2 0 2 0 0 0 0 0 e1 0 2 0 0 0 0 0 e0 0 0 0 0 0 0 0 dc 0 0 0 0 0 0 0 b5 0 0 0 0 0 0 0 cc 0 0 0 0 0 0 0 cb 0 0 0 0 0 0 0 ca 0 0 0 0 0 0 0 c9 0 0 0 0 0 0 0 c7 0 0 0 0 0 0 0 c6 0 0 0 0 0 0 0
Use the inquiry subcommand to display inquiry information for a specific disk
StorEdge A5000
SPARCstorage Array
SPARCstorage RSM
luxadm [ -v ] inquiry { enclosure[,dev]... | pathname...}
Option/Argument |
Description |
---|---|
enclosure |
The enclosure name of a StorEdge A5000 |
dev |
The name of a specific disk in an enclosure |
pathname |
The physical or logical path name of a StorEdge A5000, SPARCstorage Array, or a specific disk in an array |
# luxadm inquiry macs1 INQUIRY: Physical path: /devices/sbus@1f,0/SUNW,socal@0,0/sf@1,0/ses@w5080020000000599,0:0 Vendor: SUN Product: SENA Revision: 1.05 Device type: 0xd (SES device) Removable media: no Medium Changer Element: no ISO version: 0 ECMA version: 0 ANSI version: 3 (Device complies to SCSI-3) Terminate task: no Response data format: 2 Additional length: 0x7b Command queueing: no VENDOR-SPECIFIC PARAMETERS Byte# Hex Value ASCII 51 00 00 00 00 .... 95 6d 61 63 73 31 00 00 00 00 00 00 00 00 00 00 00 macs1........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ #