Documentation Home
> Platform Notes: Using luxadm Software
Platform Notes: Using luxadm Software
Book Information
Preface
Chapter 1 luxadm Command Basics
Command Syntax
Addressing
Addressing a StorEdge A5000 Disk Array
Specifying the Path Name
Specifying the Enclosure Name
Addressing a SPARCstorage Array
Addressing a SPARCstorage RSM Tray
Chapter 2 luxadm Subcommands
Subcommand Support Matrix
Checking and Setting Disk LEDs
Checking the Current State of a Disk LED (led)
Setting a Disk LED to the Blink Mode (led_blink)
Turning Off a Disk LED (led_off)
Turning On a Disk LED (led_on)
Displaying Enclosure and Disk Information
Probing for StorEdge A5000 Disk Arrays (probe)
Displaying Enclosure or Device Specific Data (display)
Displaying Disk Information (inquiry)
Downloading Firmware and fcode
Downloading Firmware (download)
Changing a SPARCstorage Array WWN (download)
Downloading fcode to FC25/S Host Adapters (fc_s_download)
Downloading fcode to FC100 Host Adapters (fcal_s_download)
Accessing the Enclosure Services Card
Displaying Environmental Information (env_display)
Disabling the Alarm (alarm_off)
Enabling the Alarm (alarm_on)
Setting the Alarm (alarm_set)
Performing Enclosure and Disk Operations
Renaming a StorEdge A5000 Disk Array (enclosure_name)
Collecting Performance Statistics (perf_statistics)
Powering Off an Enclosure or Disk Drive (power_off)
Powering On Enclosures or Disk Drives (power_on)
Releasing Disks (release)
Reserving Disks (reserve)
Setting the Boot Device Variable (set_boot_dev)
Starting Disks (start)
Stopping Disks (stop)
Displaying and Setting NVRAM
Enabling and Disabling Fast Write (fast_write )
Displaying Fast Write Data (nvram_data)
Purging Fast Write Data from NVRAM (purge)
Flushing NVRAM (sync_cache)
Removing, Inserting, and Replacing Enclosures and Disks
Removing Devices (remove_device )
Inserting Devices (insert_device)
Replacing Devices (replace_device)
Chapter 3 StorEdge A5000 Disk Array Hot-Plugging Procedures
UNIX File System (UFS) Operations
Adding a Disk Drive
Replacing a Disk Drive
Preparing to Replace the Disk Drive
Removing the Disk Drive
Installing the New Disk Drive
Removing a Disk Drive
Preparing to Remove the Disk Drive
Removing the Disk Drive
Volume Manager Operations
Adding a Disk Drive
Replacing a Disk Drive
Preparing to Replace the Disk Drive
Replacing the Disk Drive
Recreating a Volume Manager Configuration on the New Drive
Removing a Disk Drive
Preparing to Remove the Disk Drive
Removing the Disk Drive
Appendix A Expert Mode Subcommands
© 2010, Oracle Corporation and/or its affiliates