To logically configure a board (add the board to the system configuration), enter:
# cfgadm -c configure sysctrl#:slot#
The states and conditions for a configured attachment point are:
Receptacle state--Connected
Occupant state--Configured
Condition--OK
Now the system is also aware of the usable devices which reside on the board and all devices may be mounted or configured to be used.
If the configure operation fails for any reason, the states and conditions will still transition to configured. This creates a special situation where the board is partially configured. In this situation, only an unconfigure operation is allowed. A further attempt to configure the partial configuration is not permitted.