Glossary |
See regional hotdesking.
Sometimes also referred to as switch fabric. A switch's backplane is the pipe through which data flows from an input port to an output port. Backplane bandwidth usually refers to the aggregate bandwidth available amongst all ports within a switch.
To prevent clients from downloading firmware that is older than the firmware they already have, the administrator can set a barrier mechanism. The barrier mechanism symbol BarrierLevel is defined by default in the DHCP table of Sun Ray servers running version 2.0 or later of Sun Ray Server Software.
Controlled access mode, also known as kiosk mode.
The most common type of wiring used in LANs. It is approved for both voice and data (at up to 100Mhz). Also called cat 5.
A common way to describe network services and the user processes (programs) of those services.
The switch begins forwarding the incoming frame onto the outbound port as soon as it reads the MAC address, while it continues receiving the remainder of the frame.
Dynamic Host Configuration Protocol, which is a means of distributing IP addresses and initial parameters to the DTUs.
A set of one or more system boards that acts as a separate system capable of booting the OS and running independently of any other board.
Physical and link-level communications mechanism defined by the IEEE 802.3 family of standards.
The unique hardware address assigned to a computer system or interface board when it is manufactured. See MAC address.
A unit that redirects packets from input ports to output ports. It can be a component of the Sun Ray interconnect fabric.
The process of transferring processes from a failed server to a functional server.
When a client's firmware is downgraded to an earlier version because it connects to a server running the earlier version, it needs to be connected to a filling station so that it can download newer firmware. For this purpose, a filling station can be any private network configured for Sun Ray services or any shared network in which the Sun Ray DHCP server is the only DHCP server.
See barrier mechanism.
File Transfer Protocol. The name of the Internet protocol and the program used to transfer files between hosts.
Colloquial term for a screen, or display, or monitor, especially in a context where more than one is used in conjunction with the same keyboard and mouse, as in "multihead" feature.
The ability for a user to remove a smart card, insert it into any other DTU within a server group, and have the user's session "follow" the user, thus allowing the user to have instantaneous access to the user's windowing environment and current applications from multiple DTUs.
A pre-defined key that causes something to appear on your screen. A hot key is used to bring up the Settings screen on the Sun Ray DTU.
A property of a hardware component that can be inserted into or removed from a system that is powered on. USB devices connected to Sun Ray DTUs are hot-pluggable.
All the cabling and switches that connect a Sun Ray server's network interface cards to the Sun Ray DTUs.
A collection of networks interconnected by a set of routers that enable them to function as a single, large virtual network.
The largest internet in the world consisting of large national backbone nets (such as MILNET, NSFNET, and CREN) and a myriad of regional and local campus networks all over the world. It is a global collection of networks connecting a wide range of computers using a common protocol to communicate and share services.
Any network that provides similar services within an organization to those provided by the Internet but which is not necessarily connected to the Internet.
A unique number that identifies each host or other hardware system on a network. An IP address is composed of four integers separated by periods. Each decimal integer must be in the range 0-255 (for example, 129.144.0.0).
The assignment of an IP address to a computer system for a specified length of time, rather than permanently. IP address leasing is managed by the Dynamic Host Configuration Protocol (DHCP). Sun Ray DTU IP addresses are leased.
Same as CAM.
Local area network. A group of computer systems in close proximity that can communicate with one another through some connecting hardware and software.
The data link layer. In the OSI (Open Standards Interconnection) model, there are a total of seven layers. Layer 2 is concerned with procedures and protocols for operating the communication lines between networks as well as clients and servers. Layer 2 also has the ability to detect and correct message errors.
The CPU or computer on which a software application is running.
From the client's perspective, the most immediate server in the LAN.
The process of gaining access to a computer system.
The name by which the computer system knows the user.
Media Access Control. A MAC address is a 48-bit number programmed into each local area network interface card (NIC) at the time of manufacture. LAN packets contain destination and source MAC names and can be used by bridges to filter, process, and forward packets. 8:0:20:9e:51:cf is an example of a MAC address. See also Ethernet address.
For the purposes of the Sun Ray Server Software, the property of a session that allows it to follow a user from one DTU to another within a server group. On the Sun Ray system, mobility requires the use of a smart card or other identifying mechanism.
Authentication modules are used to implement various site-selectable authentication policies.
The process of enabling communication between Sun Ray servers over their Sun Ray network interfaces in a failover environment.
See head.
The process of transmitting multiple channels across one communications circuit.
A set of names in which a specified ID must be unique.
Technically, the hardware connecting various computer systems enabling them to communicate. Informally, the systems so connected.
The IP address used to specify a network.
An access point to a computer system on a network. Each interface is associated with a physical device. However, a physical device can have multiple network interfaces.
NIC. The hardware that links a workstation or server to a network device.
The time delay associated with moving information through a network. Interactive applications such as voice, video displays and multimedia applications are sensitive to these delays.
A number used by software to separate the local subnet address from the rest of a given Internet protocol address. An example of a network mask for a class C network is 255.255.255.0.
A network suite of protocols, organized in a hierarchy of layers called a stack. TCP/IP is an example of a Sun Ray protocol stack.
A mobile session on a Sun Ray DTU that does not rely on a smart card.
On-screen display. The Sun Ray DTU uses small OSD icons to alert the user of potential start-up problems.
A collection of files and directories that replace or update existing files and directories that prevent proper execution of the software on a computer system. The patch software is derived from a specified package format and can only be installed if the package it fixes is already present.
Authentication Manager, using the selected authentication modules, decides what tokens are valid and which users have access.
(1) A location for passing data in and out of a computer system. (2) The abstraction used by Internet transport protocols to distinguish among multiple simultaneous connections to a single destination host.
Using the power cord to restart a DTU.
Originally known as Automatic Multigroup Hotdesking (AMGH), this SRSS 3.1 feature allows users to access their sessions across wider domains and greater physical distances than was possible in earlier versions of SRSS. Administrators enable this feature by defining how user sessions are mapped to an expanded list of servers in multiple failover groups.
The ability to pan to individual screens on a DTU with a single head that were originally created by a multihead group.
A computer system that supplies computing services or resources to one or more clients.
For the purposes of the Sun Ray Server Software, any application that can directly connect to the Sun Ray DTU. It can include audio, video, X servers, access to other machines, and device control of the DTU.
A group of services associated with a single user.
The ability for a session to "follow" a user's login ID or a token embedded on a smart card.
A plastic card containing a microprocessor capable of making calculations.
The spanning tree protocol is an intelligent algorithm that allows bridges to map a redundant topology and eliminates packet looping in Local Area Networks (LAN).
The switch reads and stores the entire incoming frame in a buffer, checks it for errors, reads and looks up the MAC addresses, and then forwards the complete good frame out onto the outbound port.
A working scheme that divides a single logical network into smaller physical networks to simplify routing.
Transmission Control Protocol/Internet Protocol (TCP/IP) is a networking protocol that provides communication across interconnected networks, between computers with diverse hardware architectures and operating systems.
Thin clients remotely access some resources of a computer server, such as compute power and large memory capacity. The Sun Ray DTUs rely on the server for all computing power and storage.
The maximum allowed time interval between communications from a DTU to the Authentication Manager.
In the Sun Ray system, a token must be presented by the user. It is required by the Authentication Manager to consider allowing a user to access the system. It consists of a type and an ID. If the user inserted a smart card, the smart card's type and ID are used as the token. If the user is not using a smart card, the DTU's built-in type (pseudo) and ID (the unit's Ethernet address) are supplied as the token.
Uniform Resource Locator. A standard for writing a textual reference to an arbitrary piece of data in the World Wide Web (WWW). The syntax of a URL is protocol://host/localinfo where protocol specifies a protocol to use to fetch the object (like HTTP or FTP), host specifies the Internet name of the host on which to find it, and localinfo is a string (often a file name) passed to the protocol handler on the remote host.
The name a computer system uses to identify a particular user. Under UNIX this is a text string of up to eight characters composed of letters (a-z and A-Z), digits (0-9), hyphens (-), and underscores (_) (for example, jpmorgan). The first character must be a letter.
A region of memory on the Sun Ray server that contains the current state of a user's display.
A collection of associated users who exist in near proximity to one another. A set of Sun Ray DTUs that are connected to a Sun Ray server provides computing services to a work group.
A process which controls a bitmap display device in an X window system. It performs operations on request from client applications.
Copyright © 2004, Sun Microsystems, Inc. All Rights Reserved.