After you install Calendar Server, and before starting Calendar Server services, you must configure it. It is important that you run the two configuration programs in the following order:
Directory Preparation Script (comm_dssetup.pl)Directory Preparation Script configures Directory Server for Calendar Server 6 and
The Messaging Server 6. It prepares the Directory Server by setting up new LDAP schema, index, and configuration data.
Calendar Server Configuration Program (csconfigurator.sh)
The Calendar Server Configuration Program configures Calendar Server. It is described in Chapter 3, Calendar Server Configuration Program (csconfigurator.sh).
This chapter covers the Directory Preparation Script and contains the following topics:
If you had an earlier version of Calendar Server or Messaging Server installed, you might need to migrate your LDAP directory entries from Schema 1 to Schema 2.
Do not run the configuration utility described in this chapter until you have read theSun Java System Communications Services 6 2005Q4 Schema Migration Guide. It instructs you on the timing and options for running the configuration utilities.
In earlier versions of Java Enterprise System, this utility was bundled with Messaging Server and Calendar Server and did not have to be separately installed. However, starting with Java Enterprise System 2005Q1, the script became a separately installable shared component.
To install the Directory Preparation Script, choose one of the following methods:
Java Enterprise System installer–At the component selection panel, select the Directory Preparation Script. (Selecting Directory Server automatically selects the Directory Preparation Script, too.)
If you are upgrading from an earlier version of Java Enterprise System and are not using the Java Enterprise System installation program, download the following patches:
Solaris SPARC |
118245 and 118242 |
Solaris x86 |
118256 and 118243 |
Linux |
118247 only |
Note – Patches 118242 and 118243 are required only the first time you patch the utility. If you apply later versions of patches 118245 or 118246, you do not need to apply 118242 or 118243 again. |
As installed, the Directory Preparation Script is found in the following directory:
Solaris: |
/opt/SUNWcomds/sbin |
Linux: |
/opt/sun/comms/dssetup/sbin |
This section covers information you need to understand before running the Directory Preparation Script, and contains the following topics:
The Directory Preparation Script proceeds through three steps, as follows:
Collects your choices for utility options.
For a list of the specific information this step requests, see Information You Need to Gather.
Generates a shell script and LDIF file from your options choices that will be used to modify the LDAP directory. If you are not using a Sun product for your directory server, or have customized your Directory Server, stop the process here without running the shell script. For further information, see Directory Server Considerations that follows.
Runs the shell script created from your options choices. Your LDAP is modified accordingly.
At the end of each step, the utility asks you if you want to continue. No changes are made to the LDAP directory until the third step.
The following is a list of the considerations for your LDAP directory:
A directory server must be installed, configured and running before you run the Directory Preparation Script.
You must run the Directory Preparation Script on the same machine as your directory server.
You must run the Directory Preparation Script on every machine on which a directory server resides.
If you add an additional machine (such as a replica) at a future date, run the Directory Preparation Script against it, too.
For a list of the LDAP directory servers supported by Calendar Server 62005Q4, refer to Chapter 1, Sun Java System Calendar Server 6 2005Q4 Release Notes, in Sun Java System Communications Services 2005Q4 Release Notes.
If you have customized your LDAP directory, the following considerations may apply:
If you have indexed some attributes, you may have to reindex those attributes after the Directory Preparation Script runs.
If you have added other .ldif files (schema definitions), they should not be affected, so no action should be necessary. However, back up your custom schema definition files before running the Directory Preparation Script.
For all customizations, including the first two just listed, stop the Directory Preparation Script after it generates the script and before it actually updates the LDAP directory. Then inspect the script to evaluate how its proposed actions will affect your LDAP directory. Take whatever actions you think necessary to protect your customizations before running the script against your LDAP.
If you are not using a Sun product for your directory server, the simplest solution for deploying the Calendar Server is to upgrade your directory server to the Sun Java System Directory Server.
For information about installing and configuring a Directory Server, see http://docs.sun.com/coll/1316.1.
Alternately, you can use the script generated by the Directory Preparation Script (without actually running the script) to understand the updates you need to make to your non-Sun LDAP directory.
During the first step of the Directory Preparation Script, it requests information about your Directory Server. Prepare for this by gathering the information shown in The following table. (To help you keep track of this information, use Appendix A, Directory Configuration Worksheet.
Information Item Needed |
Default Value |
---|---|
Directory Server root path name |
/var/opt/mps/serverroot |
Which instance of Directory Server to use? (If more than one.) |
N/A |
Directory Manager Distinguished Name (DN) |
"cn=DirectoryManager" |
Directory Manager's Password |
N/A |
Directory Server being used for user/group data? (yes), or configuration data only? (no) |
yes |
User and group root suffix (if yes to previous question) |
“o=usergroup” |
Schema version? (pick one of the following) 1 Schema 1 1.5 Schema 2 Compatibility Mode 2 Schema 2 Native Mode [For more information on how to choose a schema, see About the Schema Choices. If you have one version of the schema installed and want to upgrade to a higher level, refer to the Sun Java System Communications Services 6 2005Q4 Schema Migration Guide before running this utility.] |
1 |
Root suffix (if using Schema 1 or Schema 2 Compatibility Mode) [If you choose Schema 1 or 1.5, you will need a DC tree. If the DC tree does not yet exist, the Directory Preparation Script creates only the root suffix node, its does not create the rest of the DC tree. You must create the rest of your DC tree yourself.] |
o=internet |
Update schema? [If this Directory Server is being used for user/group data, you must have a config directory containing the schema files.] |
yes |
Add Directory Server indexes? (adds icsCalendar, icsCalendarOwned) [If you answer yes, the Directory Preparation Script does the indexing for Messaging Server, Calendar Server, and Communications Server, even if you are not using all of them.] |
yes |
Calendar Server supports the following schema choices:
Corresponds to the Directory Preparation Script schema version choice 1.
Sun LDAP Schema 2 compatibility mode
Corresponds to schema version choice 1.5.
Sun LDAP Schema 2 native mode
Corresponds to schema version choice 2.
If you are still trying to decide which schema to use, for further explanation, see the Sun Java Enterprise System Technical Overview, the Sun Java Enterprise System 2005Q4 Installation Guide for UNIX, and theSun Java System Communications Services 6 2005Q4 Schema Migration Guide.
The following table lists simplified guidelines which summarize why you might choose each of the schema versions for your installation.
If you are using Schema 2, Access Manager must be installed and configured.
Do not use the Access Manager console to administer users. For information on how to administer users, see Chapter 14, Administering Users and Resources.
Attribute indexes improve the performance of search algorithms. The script offers to index attributes. If you choose to do so, it will add indexes not only for Calendar Server, but also for Messaging Server and Communications Express. Therefore, once you have run the indexing for one product, you do not need to reindex for the other product. In deed, if you try to index the same attributes again, nothing happens. The script calls db2index for each attribute being indexed, but only if the index does not already exist.
The following table lists all the attributes the Directory Preparation Script indexes, grouped by suffix category. It also lists the type of indexes created for each attribute. For more information about Directory Server indexing, see http://docs.sun.com/coll/1316.1.
Suffix |
Attributes Indexed |
Type of Indexes Added |
---|---|---|
User/Group |
|
pres,eq,approx,sub |
mailAlternateAddress |
pres,eq,approx,sub |
|
mailEquivalentAddress |
pres,eq,approx,sub |
|
member |
eq |
|
cosspecifier |
pres |
|
User/Group (for Access Manager – Schema 2) |
inetDomainBaseDN |
pres,eq |
sunPreferredDomain |
pres,eq |
|
associatedDomain |
pres,eq |
|
o |
pres,eq |
|
sunOrganizationAlias |
pres,eq |
|
DC Tree (for Schema 1) |
inetDomainBaseDN |
pres,eq |
inetCanonicalDomainName |
pres,eq |
|
Personal Address Book (PAB) |
memberOfManagedGroup |
pres,eq |
memberOfPAB |
pres,eq |
|
memberOfPABGroup |
pres,eq |
|
un |
eq |
|
icsCalendar |
pres,eq,approx,sub |
|
icsCalenarOwned |
pres,eq,approx,sub |
|
New PAB |
displayname |
pres,eq,sub |
MemberOfPiBook |
eq |
|
MemberofPiGroup |
eq |
Should you decide to add further indexes on your own, instructions for adding indexes can be found in the Directory Server documentation.
This section covers the following topics:
On the server where Directory Server is installed, login as or become superuser (root).
Start Directory Server, if necessary.
Change to the /opt/SUNWcomds/sbin directory.
Or, if you need it, a .zip file is available at /opt/SUNWcomds/lib
Run the Directory Preparation Script in either silent mode or in interactive mode. For further steps, see Running the Directory Preparation Script or Running the Directory Preparation Script.
To run this script, use the version of Perl included as a shared component automatically installed with the Java Enterprise System installer. After installation, it can be found at the following directory:
ds_svr_base/bin/slapd/admin/bin/perl
To run the Directory Preparation Script in silent mode, issue the Perl command followed by a string of options using the syntax shown in comm_dssetup.pl Syntax. All of the option arguments are required. Table 2–1describes the options.
The utility creates the following LDIF file and shell script to update the LDAP directory indexes and schema:
/var/tmp/dssetup_timestamp.ldif /var/tmp/dssetup_timestamp.sh
Depending on the option values you pass in, the utility will either proceed to update the Directory Server by executing the new script, or not. If you have chosen not to proceed with the update, you can check the script and make any desired modifications before running the actual update at a later time.
The following are all the options for running in the silent state:
perl comm_dssetup.pl -i yes|no -R yes|no -c DirectoryServerRoot -d DirectoryInstance -r DCTreeSuffix -u UserGroupSuffix -s yes|no -D DirectoryManagerDN -w DirectoryManagerPassword -b yes|no -t 1|1.5|2 -m yes|no [-S PathtoSchemaFiles] |
To run the Directory Preparation Script in interactive mode, run the script without any arguments and then enter your choices for the questions asked.
The following numbered list gives panel by panel instructions on how to use the interactive mode script.
Welcome and Introduction Panel
# cd /opt/SUNWcomds/sbin # ./comm_dssetup.pl Welcome to the Directory Server preparation tool for Sun Java System Communications Services. (Version 6.3 Revision 0.1) This tool prepares your directory server for use by the communications services which include Messaging, Calendar and their components. The logfile is /var/tmp/dssetup_YYYYMMDDHHSS Do you want to continue [y]: |
Press Enter to continue, or type no and then press Enter to exit.
Installation Root of Directory Server Panel
Please enter the full path to the directory where the Sun Java System Directory Server was installed. Directory server root [/var/opt/mps/serverroot] |
Specify the location of the installation root of the Directory Server, or press Enter to accept the default.
Directory Server Instance Panel
If multiple instances of the Directory Server reside on this machine, the program lists them and asks you to choose one.
Please select a directory server instance from the following list: [1] slapd-varrius Which instance do you want [1]: |
Enter the number corresponding to your choice, and then press Enter. Or, to accept the default, press Enter without entering a number.
Directory Manager Distinguished Name (DN) Panel
This panel has two parts, entering the Directory Manager DN and the Directory Manager’s password.
First the script asks you for the distinguished name (DN) of the Directory Manager:
Please enter the directory manager DN [cn=Directory Manager]: |
The Directory Manager DN, which defaults to cn=Directory Manager, is the administrator responsible for the user and group data in the Organization Tree. Be sure that the Directory Manager DN you specify in this script is the same DN that you set up for your Directory Server installation as well for as your Calendar Server configuration.
Enter the Directory Manager DN, or press Enter to accept the default.
Then the script asks for the Directory Manager’s password.
Password: |
Enter the password for the Directory Manager and press Enter.
The program checks to see if the Directory Server is running and listening on port 389 (the default port).
If successful, it displays the detected version as shown in the example that follows:
Detected DS version 5.2 |
If unsuccessful, it tells you that it could not detect a Directory Server running, or listening on port 389. It directs you to fix this problem before allowing you to continue. The script exits. The example below shows this output:
Directory Server not running or not listening to port 389. Detected DS version 0.0 Please correct the problem and re-run this script. |
User and Group Directory Server Panel
Will this directory server be used for users/groups [Yes]: |
Enter No if this directory instance is used to store only configuration data, or press Enter to accept the default.
If you enter No, then you must also run this script against the directory instance that stores user and group data. (Do this before you run the configuration program csconfigurator.sh.)
If your answer is Yes, you must specify a user and group base suffix for your Organization Tree.
User and Group Base Suffix Panel
Please enter the Users/Groups base suffix [o=usergroup]: |
The user and group base suffix is the top entry in the LDAP Organization Tree. Be sure that the suffix you select here is the same suffix you specify for Directory Server, Calendar Server, and Access Manager.
Schema Type Panel
There are 3 possible schema types: 1-schema 1 for systems with Calendar or Messaging 5.x data 1.5-schema 2 compatibility for systems with Calendar or Messaging 5.x data that has been converted with the Schema Migration Utility commdirmig 2-schema 2 native for systems using Access Manager Please enter the Schema Type (1, 1.5, 2) [1]: |
Enter the schema type, or press Enter to accept the default.
To use Schema 2 (options 1.5 or 2), Access Manager must be installed and configured. Otherwise, the Directory Preparation Script will terminate. You must install Access Manager before rerunning the Directory Preparation Script.
Domain Component (DC) Tree Base Suffix Panel
If you chose Schema 1 or Schema 2 Compatibility Mode, you will be asked to provide your DC tree base suffix. If you chose Schema 2 Native Mode, you will not be asked this question.
Please enter the DC Tree base suffix [o=internet]: |
In the Schema Type Panel described earlier, if you chose Schema 1 or Schema 2 Compatibility Mode, you will be asked to provide your DC tree base suffix. If you chose Schema 2 Native Mode, you will not be asked this question.
The DC tree mirrors the local DNS structure and is used by the system as an index to the Organization tree that contains the user and group data entries. The DC tree base suffix is the name of the top entry on the DC tree.
Enter a suffix, or press Enter to accept the default.
Series of Questions Panel
This next panel asks a series of questions about updates to your LDAP.
Updating Schema Files
At this point the program checks to see if your schema has the correct schema elements. If your schema is missing some elements, it prints the following message:
Detected bad schema elements in 99user.ldif. It is recommended that you update the schema. Do you want to update the schema files [yes]: |
Answer Yes to add required new elements to your schema. You need to update the directory with the new schema files each time you install a new version of Calendar Server or Messaging Server.
Answer No if you want to delay updating the schema files.
Configuring New Indexes
If you chose to update the schema in the previous step, you will be asked if you want to configure new indexes. For more information about indexing attributes, see Attribute Indexes.
Do you want to configure new indexes [yes]: |
To approve indexing, press Enter.
If you have already performed this indexing step for the same attributes, answer no.
Reindex Now
You can choose to do the indexing now, or you can do it at a later time. If you choose to defer the indexing, rerun the script with indexing turned on when it is convenient. Indexing can take a long time, but the Directory Server is still functional, that is, is not put into read only mode during indexing.
Reindex now [yes]? |
If you want to do the indexing at a later time, answer no, otherwise, press Enter and accept the default.
Summary of Settings Panel
Before the Directory Preparation Script updates the Directory Server configuration, it displays a summary of your settings and then asks if you want to continue.
Here is a summary of the settings that you chose: Server Root : /var/opt/mps/serverroot/ Server Instance : slapd-varrius Users/Groups Directory : yes Update Schema : yes Schema Type : 1 DC Root : o=internet User/Group Root : dc=red,dc=sesta,dc=com Add New Indexes : yes Reindex New Indexes Now : yes Directory Manager DN : cn=Directory Manager Now ready to generate a shell script and ldif file to modify the Directory. No changes to the Directory Server will be made this time. Do you want to continue [Y]: |
If you chose Schema 2 Native Mode in Running the Directory Preparation Script, the DC Root will be the same value that you entered for the User/Group Root.
To change any of your settings, enter no and rerun the script.
If you want to continue, press Enter. The Directory Preparation Script generates an LDIF file and a shell script. The names of the files it creates are as follows:
/var/tmp/dssetup_timestamp.ldif /var/tmp/dssetup_timestamp.sh |
If you chose to continue, you will see messages printed out as the program works. The following is an example of the output you will see:
Generating files... Checking to see if Suffixes need to be added Checking to see that uid uniqueness plugins are turned off Adding indexes Adding Indexes for User/group Tree (backend:userRoot) Checking indexes for member No new indexes required Checking indexes for mailAlternateAddress No new indexes required Checking indexes for mail No new indexes required Checking indexes for mailEquivalentAddress No new indexes required Checking indexes for cosspecifier No new indexes required Adding Indexes for DC Tree (backend:internetdb2) Checking indexes for inetCanonicalDomainName No new indexes required Checking indexes for inetDomainBaseDN No new indexes required Adding Indexes for PAB Tree (backend:pabdb2) Checking indexes for memberOfPAB No new indexes required Checking indexes for icsCalendar No new indexes required Checking indexes for un No new indexes required Checking indexes for memberOfPABGroup No new indexes required Checking indexes for icsCalendarOwned No new indexes required Checking indexes for memberOfManagedGroup No new indexes required Adding Indexes for New PAB Tree (backend:PiServerDbdb2) Checking indexes for MemberOfPiBook No new indexes required Checking indexes for MemberofPiGroup No new indexes required Checking indexes for displayname No new indexes required Checking to see if DN needs to be created for suffixes Generating ldif for installer metadata Generating ldif for Adding schema for installer metadata Generating ldif for updating DN for cn=CommServers,o=comms-config The following files have been created: /var/tmp/dssetup_20041209114027.sh /var/tmp/dssetup_20041209114027.ldif Running /var/tmp/dssetup_20041209114027.sh will make changes to the Directory. You can run this file now or at a later time Ready to execute the script now. |
Running the Script
Do you want to continue [yes]: |
Press Enter to accept the default setting (yes). The dssetup_timestamp.sh script runs against your LDAP directory. If you do not want to run the script now, enter No to exit. If you exit, you can run the /var/tmp/dssetup_timestamp.sh script at a later time.
The following is an example of the text output generated while the script is running:
Running /var/tmp/dssetup_20041209114027.sh -D "cn=Directory Manager" -j /var/tmp/dssetup_20041209114027.pw Stopping Directory Server Updating Schema files... Copying 20subscriber.ldif Copying 50ns-delegated-admin.ldif Copying 50ns-mail.ldif Copying 50ns-mlm.ldif Copying 50ns-msg.ldif Copying 50ns-value.ldif Copying 55ims-ical.ldif Copying 56ims-schema.ldif Copying 70sun-schema2.ldif Copying 71sun-am.ldif Copying 60iplanet-calendar.ldif Copying 50ns-iabs.ldif Copying 98ns-dummy-uwc.ldif Copying 70delgated-admin.ldif Copying /var/tmp/99user_20041209114027.ldif to /var/opt/mps/serverroot/slapd-varrius/config/schema/99user.ldif Starting Directory Server Applying ldif file /var/tmp/dssetup_20041209114027.ldif modifying entry cn=schema modifying entry cn=schema modifying entry cn=CommServers,o=comms-config Done Applying ldif file /var/tmp/dssetup_20041209114027.ldif rejects to /var/tmp/dssetup_20041209114027.ldif.rej status = 0 Successful Completion. Consult /var/tmp/dssetup_20041209114027.log for details |
If for any reason, you have decided not to run the Directory Preparation Script generated script, the following directions allow you to manually update your schema files for Sun Java System Directory Server.
If you update your LDAP directory schema manually and then later upgrade Calendar Server, you must manually update the LDAP server schema again. Calendar Server cannot automatically update the schema after the it has previously been updated manually.
Install Calendar Server 62005Q4.
Stop Calendar Server, if it is running.
Stop Directory Server, if it is running.
Copy the 60iplanet-calendar.ldif file to the following directory on the machine where your directory server is running:
dir_svr_base/slapd-hostname/config/schema |
where dir_svr_base is the Directory Server installation directory and hostname identifies the machine.
If you want to index attributes, as the configuration program does, do it at this point. For a list of the attributes the configuration program indexes, see Attribute Indexes.
Restart the Directory Server. If you receive object identifier (OID) errors, see Resolving Conflicting OID's in the LDAP Schema Directory.
Configure Calendar Server by running the csconfiguration.sh program.
For instructions on configuring Calendar Server, see Chapter 3, Calendar Server Configuration Program (csconfigurator.sh).
If your LDAP schema directory contains conflicting OID's, the Directory Server does not know which OID to use and returns an error message. For example, the following message indicates a conflicting OID for the icsCalendarUser object class:
[24/Apr/2004:23:45:28 -0700] dse - The entry cn=schema in file 99user.ldif is invalid, error code 20 (Type or value exists) - object class icscalendaruser: The name does not match the OID. Another object class is already using the name or OID. [24/Apr/2004:23:45:28 -0700] dse - Please edit the file to correct the reported problems and then restart the server.
This problem can occur when you install Calendar Server 62005Q4 and you also had an older Calendar Server release that dynamically updated your LDAP server schema 99user.ldif file.
To resolve the conflicting OID's, perform the following two steps:
Edit the 99user.ldif file and remove the older OID's. For Calendar Server 62005Q4, the following table lists the specific OID's that might cause problems.
Object Class |
Old OID |
New OID |
---|---|---|
icsCalendarUser |
2.16.840.1.113730.3.2.141 |
1.3.6.1.4.1.42.2.27.9.2.44 |
icsCalendarResource |
2.16.840.1.113730.3.2.143 |
1.3.6.1.4.1.42.2.27.9.2.45 |
icsCalendarDomain |
2.16.840.1.113730.3.2.144 |
1.3.6.1.4.1.42.2.27.9.2.4 |
After you edit the 99user.ldif file, restart the Directory Server.