Skip Navigation Links | |
Exit Print View | |
Oracle Solaris Cluster Upgrade Guide Oracle Solaris Cluster |
1. Preparing to Upgrade Oracle Solaris Cluster Software
2. Performing a Standard Upgrade to Oracle Solaris Cluster 3.3 Software
3. Performing a Dual-Partition Upgrade to Oracle Solaris Cluster 3.3 Software
4. Performing a Live Upgrade to Oracle Solaris Cluster 3.3 Software
5. Performing a Rolling Upgrade
7. Recovering From an Incomplete Upgrade
8. SPARC: Upgrading Sun Management Center Software
Upgrading the Oracle Solaris Cluster Module for Sun Management Center
SPARC: How to Upgrade Oracle Solaris Cluster Module Software for Sun Management Center
This section provides procedures to upgrade Sun Management Center software.
Perform the following steps to upgrade from Sun Management Center 3.6 or 3.6.1 software to Sun Management Center 3.6.1 or 4.0 software.
Before You Begin
Have available the following items:
Oracle Solaris Cluster installation DVD-ROM for the SPARC platform and, if applicable, for the x86 platform, or the paths to the DVD-ROM images. You use the DVD-ROM to reinstall the Oracle Solaris Cluster 3.3 version of the Oracle Solaris Cluster module packages after you upgrade Sun Management Center software.
Note - The agent packages to install on the cluster nodes are available for both SPARC based systems and x86 based systems. The package for the server machine is available for SPARC based systems only.
Sun Management Center documentation.
Sun Management Center patches and Oracle Solaris Cluster module patches, if any.
See Patches and Required Firmware Levels in the Oracle Solaris Cluster 3.3 Release Notes for the location of patches and installation instructions.
In the console window, choose File⇒Exit.
phys-schost# /opt/SUNWsymon/sbin/es-stop -a
server# /opt/SUNWsymon/sbin/es-stop -S
Use the pkgrm(1M) command to remove all Oracle Solaris Cluster module packages from all locations that are listed in the following table.
|
machine# pkgrm module-package
If you do not remove the listed packages, the Sun Management Center software upgrade might fail because of package dependency problems. You reinstall these packages in Step 4, after you upgrade Sun Management Center software.
Follow the upgrade procedures in your Sun Management Center documentation.
|
machine# cd /cdrom/cdrom0/Solaris_arch/Product/sun_cluster/Solaris_ver/Packages/
Note - The agent packages to install on the cluster nodes are available for both SPARC based systems and x86 based systems. The package for the server machine is available for SPARC based systems only.
phys-schost# pkgadd -G -d . module-package
The -G option adds packages to the current zone only. You must add these packages only to the global zone. Therefore, this option also specifies that the packages are not propagated to any existing non-global zone or to any non-global zone that is created later.
phys-schost# pkgadd -d . module-package
Follow procedures in How to Start Sun Management Center in Oracle Solaris Cluster Software Installation Guide.
Follow procedures in How to Load the Oracle Solaris Cluster Module in Oracle Solaris Cluster Software Installation Guide.
If the Oracle Solaris Cluster module was previously loaded, unload the module and then reload it to clear all cached alarm definitions on the server. To unload the module, choose Unload Module from the Module menu on the console's Details window.