Skip Navigation Links | |
Exit Print View | |
Oracle Solaris Cluster 3.3 With SCSI JBOD Storage Device Manual |
1. Installing a SCSI JBOD Storage Device
FRUs That Do Not Require Oracle Solaris Cluster Maintenance Procedures
Sun StorEdge 3120 Storage Array FRUs
Sun StorEdge 3310 and 3320 SCSI Storage Array FRUs
SPARC: Sun StorEdge D1000 Storage Array FRUs
SPARC: Sun StorEdge Netra D130/S1 Storage Array FRUs
SPARC: Sun StorEdge D2 Storage Array FRUs
SPARC: Sun StorEdge Multipack Storage Array FRUs
Disconnecting and Reconnecting a Node from Shared Storage
How to Disconnect the Node from Shared Storage
How to Reconnect the Node to Shared Storage
How to Replace a Host Adapter When Using Failover and Scalable Data Services Only
How to Replace a Host Adapter When Using Oracle Real Application Clusters Only
How to Replace a Disk Drive Without Oracle Real Application Clusters
SPARC: How to Replace a Disk Drive With Oracle Real Application Clusters
How to Upgrade Disk Drive Firmware
This chapter describes the procedures about how to maintain SCSI JBOD storage devices in an Oracle Solaris Cluster environment.
The procedures in this chapter apply to the following SCSI JBOD storage devices:
Sun StorEdge 3120 storage array
Sun StorEdge 3310 SCSI storage array
Sun StorEdge 3320 SCSI storage array
SPARC: Sun StorEdge D1000 storage array
SPARC: Sun StorEdge Multipack storage array
SPARC: Sun StorEdge D130/S1 storage array
SPARC: Sun StorEdge D2 storage array
This chapter contains the following procedures:
How to Replace a Host Adapter When Using Failover and Scalable Data Services Only
How to Replace a Host Adapter When Using Oracle Real Application Clusters Only
How to Replace a Disk Drive Without Oracle Real Application Clusters
SPARC: How to Replace a Disk Drive With Oracle Real Application Clusters