How to Check the State of Transactional Volumes (Solaris Volume Manager Administration Guide)

Solaris Volume Manager Administration Guide

How to Check the State of Transactional Volumes

To check the status of a transactional volume, use one of the following methods:

From the Enhanced Storage tool within the Solaris Management Console, open the Volumes node, then view the status of the volumes. Right-click a transactional volume and choose Properties for more detailed status information. For more information, see the online help.
Use the metastat command.

For more information, see the metastat(1M) man page.

Example—Checking the Status of Transactional Volumes

Here is sample transactional volume output from the metastat command:

# metastat
d20: Trans
    State: Okay        
    Size: 102816 blocks
    Master Device: c0t3d0s4
    Logging Device: c0t2d0s3
 
        Master Device       Start Block  Dbase
        c0t3d0s4                   0     No  
 
c0t2d0s3: Logging device for d0
    State: Okay        
    Size: 5350 blocks
 
        Logging Device      Start Block  Dbase
        c0t2d0s3                 250     No

The metastat command also shows master devices and log devices. For each device, the following information is displayed:

“Device”, which is the device name of the slice or volume
“Start Block”, which is the block on which the device begins
“Dbase”, which shows if the device contains a state database replica
“State”, which shows the state of the log device

The following table explains transactional volume states and possible actions to take.

Table 18–1 Transactional Volume States


State	Meaning	Action
Okay	The device is functioning properly. If mounted, the file system is logging and will not be checked at boot.	None.
Attaching	The log device will be attached to the transactional volume when the volume is closed or unmounted. When this occurs, the device transitions to the Okay state.	None.
Detached	The transactional volume does not have a log device. All benefits from UFS logging are disabled.	The `fsck` command automatically checks the device at boot time. See the fsck(1M) man page.
Detaching	The log device will be detached from the transactional volume when the volume is closed or unmounted. When this occurs, the device transitions to the Detached state.	None.
Hard Error	A device error or panic has occurred while the device was in use. An I/O error is returned for every read or write until the device is closed or unmounted. The first open causes the device to transition to the Error state.	Fix the transactional volume. See How to Recover a Transactional Volume With a Panic, or How to Recover a Transactional Volume With Hard Errors.
Error	The device can be read and written to. The file system can be mounted read-only. However, an I/O error is returned for every read or write that actually gets a device error. The device does not transition back to the Hard Error state, even when a later device error occurs.	Fix the transactional volume. See How to Recover a Transactional Volume With a Panic, or How to Recover a Transactional Volume With Hard Errors. Successfully completing the `fsck` or `newfs` commands transitions the device into the Okay state. When the device is in the Hard Error or Error state, the `fsck` command automatically checks and repairs the file system at boot time. The `newfs` command destroys whatever data might be on the device.