pmadm(1M)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | EXIT STATUS | FILES | ATTRIBUTES | SEE ALSO

NAME

pmadm– port monitor administration

SYNOPSIS

pmadm -a [-p pmtag| -t type] -s svctag -i id -m pmspecific -v ver [-fxu] [-y comment] [-z  script]
pmadm -r -p pmtag -s svctag
pmadm -e -p pmtag -s svctag
pmadm -d -p pmtag -s svctag
pmadm -l [-t type| -p pmtag] [-s svctag]
pmadm -L [-t type| -p pmtag] [-s svctag]
pmadm -g -p pmtag -s svctag [-z script]
pmadm -g -s svctag -t type -z script

DESCRIPTION

pmadm is the administrative command for the lower level of the Service Access Facility hierarchy, that is, for service administration. A port may have only one service associated with it although the same service may be available through more than one port. In order to uniquely identify an instance of a service, the pmadm command must identify both the port monitor or port monitors through which the service is available (-p or -t) and the service (-s). See OPTIONS.

pmadm performs the following functions:

• adds or removes a service

• enables or disables a service

• installs or replaces a per-service configuration script

• prints requested service information

Any user on the system may invoke pmadm to request service status (-l or -L) or to print per-service configuration scripts (-g without the -z option). pmadm with other options may be executed only by a privileged user.

OPTIONS

The following options are supported:

-a

Add a service. pmadm adds an entry for the new service to the port monitor's administrative file. Because of the complexity of the options and arguments that follow the -a option, it may be convenient to use a command script or the menu system to add services.

-d

Disable a service. Add x to the flag field in the entry for the service svctag in the port monitor's administrative file. This is the entry used by port monitor pmtag. See the -f option, below, for a description of the flags available.

-e

Enable a service. Remove x from the flag field in the entry for the service svctag in the port monitor administrative file. This is the entry used by port monitor pmtag. See the -f option, below, for a description of the flags available.

-f xu

The -f option specifies one or both of the following two flags which are then included in the flag field of the entry for the new service in the port monitor's administrative file. If the -f option is not included, no flags are set and the default conditions prevail. By default, a new service is enabled and no utmpx entry is created for it. An -f option without a following argument is illegal.

x

Do not enable the service svctag available through port monitor pmtag.

u

Create a utmpx entry for service svctag available through port monitor pmtag.

-g

Print, install, or replace a per-service configuration script. The -g option with a -p option and a -s option prints the per-service configuration script for service svctag available through port monitor pmtag. The -g option with a -p option, a -s option, and a -z option installs the per-service configuration script contained in the file script as the per-service configuration script for service svctag available through port monitor pmtag. The -g option with a - s option, a -t option, and a -z option installs the file script as the per-service configuration script for service svctag available through any port monitor of type type. Other combinations of options with -g are invalid.

-i id

id is the identity that is to be assigned to service svctag when it is started. id must be an entry in /etc/passwd.

-l

The -l option requests service information. Used by itself and with the options described below, it provides a filter for extracting information in several different groupings.

-l

By itself, the -l option lists all services on the system.

-l -p pmtag

Lists all services available through port monitor pmtag.

-l -s svctag

Lists all services with tag svctag.

-l -p pmtag-ssvctag

Lists service svctag.

-l -t type

Lists all services available through port monitors of type type.

-l -t type-ssvctag

Lists all services with tag svctag available through a port monitor of type type.

Other combinations of options with -l are invalid.

-L

The -L option is identical to the -l option except that output is printed in a condensed format.

-m pmspecific

pmspecific is the port monitor-specific portion of the port monitor administrative file entry for the service.

-p pmtag

Specifies the tag associated with the port monitor through which a service (specified as -s svctag) is available.

-r

Remove a service. When pmadm removes a service, the entry for the service is removed from the port monitor's administrative file.

-s svctag

Specifies the service tag associated with a given service. The service tag is assigned by the system administrator and is part of the entry for the service in the port monitor's administrative file.

-t type

Specifies the the port monitor type.

-v ver

Specifies the version number of the port monitor administrative file. The version number may be given as

---

-v 'pmspec -V`

---

where pmspec is the special administrative command for port monitor pmtag. This special command is ttyadm for ttymon and nlsadmin for listen. The version stamp of the port monitor is known by the command and is returned when pmspec is invoked with a -V option.

-y comment

Associate comment with the service entry in the port monitor administrative file.

-z script

Used with the -g option to specify the name of the file that contains the per-service configuration script. Modifying a configuration script is a three-step procedure. First a copy of the existing script is made (-g alone). Then the copy is edited. Finally, the copy is put in place over the existing script (-g with -z).

Options that request information write the requested information to the standard output. A request for information using the -l option prints column headers and aligns the information under the appropriate headings. In this format, a missing field is indicated by a hyphen. A request for information in the condensed format using the -L option prints the information in colon-separated fields; missing fields are indicated by two successive colons. # is the comment character.

EXAMPLES

---

Example 1 Adding a Service to a Port Monitor with the Tag pmtag




The following command adds a service to a port monitor with tag pmtag and gives the service the tag svctag. The port monitor-specific information is generated by specpm. The service defined by svctag will be invoked with identity root.

pmadm -a -p pmtag -s svctag -i root -m `specpm -a arg1 -b arg2`-v `specpm -V`

---

---

Example 2 Adding a Service with Service Tab svctag




The following command adds a service with service tag svctag, identity guest, and port monitor-specific information generated by specpm to all port monitors of type type:

pmadm -a -s svctag -i guest -t type -m `specpm -a arg1 -b arg2`-v `specpm -V`

---

---

Example 3 Removing a Service




The following command removes the service svctag from port monitor pmtag:

pmadm -r -p pmtag -s svctag

---

---

Example 4 Enabling a Service




The following command enables the service svctag available through port monitor pmtag:

pmadm -e -p pmtag -s svctag

---

---

Example 5 Disabling a Service




The following command disables the service svctag available through port monitor pmtag:

pmadm -d -p pmtag -s svctag

---

---

Example 6 Listing Status Information




The following command lists status information for all services:

pmadm -l

---

---

Example 7 Listing Status Information




The following command lists status information for all services available through the port monitor with tag ports:

pmadm -l -p ports

---

---

Example 8 Listing Status Information in Condensed Format




The following command lists the status information for all services available through the port monitor with tag ports in condensed format:

pmadm -L -p ports

---

---

Example 9 Listing Status Information for All Services




List status information for all services available through port monitors of type listen:

pmadm -l -t listen

---

---

Example 10 Printing the per-service Configuration




The following command prints the per-service configuration script associated with the service svctag available through port monitor pmtag:

pmadm -g -p pmtag -s svctag

---

EXIT STATUS

The following exit values are returned:

0

Successful operation.

>0

Operation failed.

FILES

/etc/saf/pmtag/_config

/etc/saf/pmtag/svctag

/var/saf/pmtag/*

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	SUNWcsu

SEE ALSO

sac(1M), sacadm(1M), doconfig(3NSL), attributes(5)

SunOS 5.9  Last Revised 10 Nov 1998

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | EXIT STATUS | FILES | ATTRIBUTES | SEE ALSO