System Administration Guide: Basic Administration

SCSI Hot-Plugging With the `cfgadm` Command (Task Map)

Task	Description	For Instructions
1. Display information about SCSI devices	Display information about SCSI controllers and devices.	How to Display Information About SCSI Devices
2. Unconfigure a SCSI controller	Unconfigure a SCSI controller.	How to Unconfigure a SCSI Controller
3. Configure a SCSI controller	Configure a SCSI controller that was previously unconfigured.	How to Configure a SCSI Controller
4. Configure a SCSI device	Configure a specific SCSI device.	How to Configure a SCSI Device
5. Disconnect a SCSI controller	Disconnect a specific SCSI controller.	How to Disconnect a SCSI Controller
6. Connect a SCSI controller	Connect a specific SCSI controller that was previously disconnected.	SPARC: How to Connect a SCSI Controller
7. Add a SCSI device to a SCSI bus	Add a specific SCSI device to a SCSI bus.	SPARC: How to Add a SCSI Device to a SCSI Bus
8. Replace an identical device on a SCSI controller	Replace a device on the SCSI bus with another device of the same type.	SPARC: How to Replace an Identical Device on a SCSI Controller
9. Remove a SCSI device	Remove a SCSI device from the system.	SPARC: How to Remove a SCSI Device
10. Troubleshooting SCSI configuration problems	Resolve a failed SCSI unconfigure operation.	How to Resolve a Failed SCSI Unconfigure Operation

SCSI Hot-Plugging With the cfgadm Command (Task Map)