Sun Integrated Lights Out Manager 2.0 Supplement for Sun Blade T6320 Server Modules
820-2546-11
|
Contents |
1. ILOM for Sun Blade T6320 Server Modules
Sun Blade T6320-Specific ILOM Features
Chassis Monitoring Module Features
Resetting the Password to the Factory Default

To Manage the Host Boot Mode LDoms Configuration Using the CLI

To Manage the Host Boot Mode Script Using the CLI

To Change the Host Boot Mode Behavior at Reset Using the CLI

To Display the Host Boot Mode Expiration Date Using the CLI

To Change Boot Mode Configuration Settings Using the Web Interface
Viewing Host Information and Setting System Policy Concerning Error Conditions

To Display the Host MAC Address Using the CLI

To Display the Host OpenBoot Version Using the CLI

To Display the Host POST Version Using the CLI

To Determine Host Behavior When the Watchdog Timer Expires Using the CLI

To Specify Host Behavior During Diagnostics When an Error Is Discovered During Diagnostics Using the CLI

To View and Configure Host Control Features Using the Web Interface
Managing Host Diagnostics and POST

To Specify the Level of Diagnostics Using the CLI

To Change the Diagnostics Mode Using the CLI

To Specify Diagnostic Trigger Conditions Using the CLI

To Choose the Amount of Verbosity in Diagnostic Output Using the CLI

To Manage Diagnostic Settings Using the Web Interface
Managing System User Interactions

To Enable the System To Send a Break Signal or Force a Core Dump Using the CLI

To Display Host Status Information Using the CLI
3. Managing the Service Processor

To Change Customer FRU Data Using the CLI

To Change System Identification Information Using the CLI

To Change Customer Identification Information Using the Web Interface
Changing Service Processor Settings to Factory Defaults

To Reset the Service Processor Settings to Factory Default Values Using the CLI

To Reset the Service Processor Settings to Factory Default Values Using the Web Interface
Modifying Console Escape Characters

To Change Console Escape Characters Using the CLI
Changing Configuration Policy Settings

To Disable or Re-Enable Backup of the User Database Using the CLI

To Disable or Re-Enable Powering On the Host Server Using the CLI

To Disable or Re-Enable Power-On Delay Using the CLI

To Disable or Re-Enable Automatic Host Power-On Using the CLI

To Manage Configuration Policy Settings Using the Web Interface
Managing Power Usage and Monitoring Power Consumption

To View Power Management Properties (CLI)

To View the Total Power Consumed by the System (CLI)

To View Total Available Power (CLI)
To Monitor Permitted Power Consumption (CLI)
Using the Power Consumption Control Interfaces

To View the Power Policy (CLI)

To View Power Management Properties (Browser Interface)

To Disable or Re-Enable Network Access to the SP (CLI)

To Display the DHCP Server’s IP Address (CLI)

To Change the Type of SSH Keys Using the CLI

To Generate a New Set of SSH Keys Using the CLI

To Restart the SSH Server Using the CLI

To Enable or Disable the SSH Service Using the CLI

To Manage SSH Server Settings Using the Web Interface
Monitoring Active System Faults

To Display Active System Faults
4. Managing Virtual Keyswitch Settings

To Control the Virtual Keyswitch Using the CLI

To Control the Virtual Keyswitch Using the Web Interface
B. ALOM CMT Compatibility Shell
Limits to Backward Compatibility
Adding a Commit Step to Procedures That Configure ILOM Network Configuration Properties

To Commit a Change to a Network Configuration Property

To Commit a Change to a Serial Port Configuration Property

To Create an ALOM CMT Compatibility Shell

To Switch Between the ALOM CMT Shell and the Host Console
ILOM - ALOM CMT Command Comparison
ALOM CMT Variable - ILOM Property Comparison
C. Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
Host Monitoring Event Messages
Copyright © 2008 Sun Microsystems, Inc. All Rights Reserved.