Figures

FIGURE 1-1 Sun StorageTek 6540 Array Product Overview

FIGURE 1-2 Controller Tray (Front View)

FIGURE 1-3 Power Cooling Units and Battery Backup Compartment LEDs

FIGURE 1-4 Controller Tray Ports (Back)

FIGURE 1-5 Controller Tray LEDs and Indicators (Back View)

FIGURE 1-6 Expansion Tray Ports and Components (Back)

FIGURE 1-7 Expansion Tray LEDs and Indicators (Back)

FIGURE 2-1 Loosening the Rail Screws to Adjust the Controller Tray Rail Length

FIGURE 2-2 Adjusting the Expansion Tray Rail Length

FIGURE 2-3 Physical Location of Each Tray in the Cabinet

FIGURE 2-4 6540 Array Tray Groups

FIGURE 2-5 Intratray Cabling Within a Tray Group

FIGURE 2-6 Positioning the Front of the Left Rail Behind the Left Front Cabinet Rail

FIGURE 2-7 Securing the Left Rail to the Front of the Cabinet

FIGURE 2-8 Adjusting the Length of the Left Rail at the Back of the Cabinet

FIGURE 2-9 Securing the Left Rail to the Back of the Cabinet

FIGURE 2-10 Tightening the Rail Adjustment Screws

FIGURE 2-11 Positioning the Tray in the Cabinet

FIGURE 2-12 Sliding the Tray Into the Cabinet

FIGURE 2-13 Securing the Tray to the Front of a Cabinet

FIGURE 2-14 Securing the Tray to the Back of the Cabinet Rail

FIGURE 2-15 Positioning the Left Rail Behind the Left Front Cabinet Rail

FIGURE 2-16 Securing the Left Rail to the Front of the Cabinet

FIGURE 2-17 Adjusting the Length of the Left Rail at the Back of the Cabinet

FIGURE 2-18 Securing the Left Rail to the Back of the Cabinet

FIGURE 2-19 Tightening the Rail Adjustment Screws

FIGURE 2-20 Inserting Rail Mounting Screws in Middle Holes of the Upper Mounting Unit of the Mounting Slot

FIGURE 2-21 Hanging the Rail

FIGURE 2-22 Inserting Screws in the Lower Side Mounting Holes of the Cabinet

FIGURE 2-23 Securing the Rail to the Front of the Cabinet

FIGURE 2-24 Inserting Cage Nuts Over Rail Mounting Holes in Cabinet Rails

FIGURE 2-25 Inserting the Cabinet Rail Adapter Plate on the Cabinet Rail

FIGURE 2-26 Securing the Rail to the Front of the Cabinet

FIGURE 2-27 Inserting a Cage Nut on the Cabinet Rail at the Back of the Cabinet

FIGURE 2-28 Adjusting the Length of the Rail at the Back of the Cabinet

FIGURE 2-29 Securing the Rail to the Back of the Cabinet

FIGURE 2-30 Positioning the Tray in the Cabinet

FIGURE 2-31 Sliding the Tray Into the Cabinet

FIGURE 2-32 Securing the Tray to the Front of a Cabinet

FIGURE 2-33 Securing the Tray to the Back of the Cabinet Rail

FIGURE 2-34 Drive Ports on the Controller Tray

FIGURE 2-35 Cabling of One Controller and Four Expansion Trays

FIGURE 2-36 Cabling of Sun StorageTek 6540 Array Configuration - One Controller Tray and Eight Expansion Trays

FIGURE 2-37 Cabling of Sun StorageTek 6540 Array Configuration - One Controller and Eleven Expansion Trays

FIGURE 2-38 Cabling of Sun StorageTek 6540 Array Configuration - One Controller and Fourteen Expansion Trays

FIGURE 3-1 Ethernet Ports for Controller A and Controller B

FIGURE 3-2 Data Host Ports

FIGURE 3-3 Cabling Switches With Single Connections

FIGURE 3-4 Cabling Switches With Cross-Connections

FIGURE 3-5 Direct Connection to Two Hosts With Dual HBAs

FIGURE 3-6 Direct Connection to Three Hosts With Dual HBAs

FIGURE 4-1 Tray Link Rate Switch

FIGURE 4-2 Tray Power Connectors and Switches