| Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide |     |
| Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide | |
Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide
Installing and Configuring the System
819-4283-11
|
Contents |
How This Document Is Organized
Documentation, Support, and Training
Supported File Access Protocols
Network Security and Protocol Integration
Automatic IP Address Assignment
RAID Controllers (Non-Gateway Systems)
Sun StorageTek 5320 NAS Appliance Server
Connecting to an Auxiliary Local UPS
Sun StorageTek 5320 NAS Cluster Appliance
Sun StorageTek 5320 NAS Gateway System
Sun StorageTek 5320 NAS Cluster Gateway System
Server Options for All Configurations
2. Installing Servers and Back-End Storage
Standard Cabinets, Racks, and Rail Kits
Slide Rail Kit for Sun StorageTek 5320 NAS Appliance
Universal Rail Kit for Back-End Storage
Preparing for the Installation
To Avoid Damage to Internal Components
To Ground the Rack Installation
To Prepare the Server Rackmount Kit
To Prepare the Universal Rail Kit
To Prepare the Controller and Expansion Units
To Install the System With a Single Controller Unit
To Install the System With Two Controller Units
Attaching the Universal Rail Kit to a Cabinet
To Attach the Universal Rail Kit to a Cabinet
Installing a Unit in a Cabinet
Installing a Server in a Cabinet
To Install the Slide Rail Assemblies
To Install the Cable Management Kit
To Verify the Operation of the Slide Rails and the CMA
Upgrading a Sun StorageTek 5320 Cabinet
3. Connecting the Sun StorageTek 5320 NAS Appliance
Connecting the Sun StorageTek 5320 NAS Appliance to Back-End Storage
Connecting the Sun StorageTek 5320 NAS Appliance to the Controller Unit
To Connect One Controller Unit
To Connect One Controller Unit to Two HBA Cards
To Connect Two Controller Units
Connecting Controller Units to Expansion Units
To Cable a Controller Unit to One Expansion Unit
To Cable a Controller Unit to Two Expansion Units
To Cable a Controller Unit to Three Expansion Units
To Cable a Controller Unit to Six Expansion Units
Connecting Existing Sun StorEdge 5300 Controller Enclosures to New Sun StorageTek 5320 Expansion Units
Cabling a Single Expansion Unit to a Controller Enclosure with FC Drives
To cable a Controller Enclosure to a Single Expansion Unit
Cabling Two Expansion Units to a Controller Enclosure
To Cable a Controller Enclosure to Two Expansion Units
Cabling a Single Expansion Unit to a 5300 SATA Controller Enclosure
To Cable a Controller Enclosure with SATA Drives to an Expansion Unit
Upgrade Firmware on Expansion Units and Enclosures
To Connect to Copper Fast Ethernet or Gigabit Ethernet Networks
To Connect to Optional Optical Gigabit Ethernet Networks
Powering On the Sun StorageTek 5320 NAS Appliance, Controller Units, and Expansion Units
To Initially Power On the Sun StorageTek 5320 NAS Appliance and Controller Unit
To Initially Power On the Sun StorageTek 5320 NAS Appliance, Controller Units, and Expansion Units
To Power On the Sun StorageTek 5320 NAS Appliance System After Initial Power-On
Initial Sun StorageTek 5320 NAS Appliance Configuration
Automatic (DHCP) IP Address Configuration
To Configure the IP Address Manually
Accessing the Web Administrator
To Connect to the Web Administrator
4. Installing the Sun StorageTek 5320 NAS Cluster Appliance
Connecting the Sun StorageTek 5320 NAS Cluster Appliance to Back-End Storage
Connecting the Sun StorageTek 5320 NAS Cluster Appliance to Controller Units
To Connect One Controller Unit
To Connect Two Controller Units
Connecting the Controller Units to Expansion Units
To Cable a Controller Unit to One Expansion Unit
To Cable a Controller Unit to Two Expansion Units
To Cable a Controller Unit to Three Expansion Units
To Cable a Controller Unit to Six Expansion Units
Connecting the Server Health-Monitoring and Network Cables
To Connect the Health-Monitoring Cable
To Connect to Optical Gigabit Ethernet Networks
To Connect to Copper Fast Ethernet or Gigabit Ethernet Networks
Powering On the Sun StorageTek 5320 NAS Cluster Appliance, Controller Units, and Expansion Units
To Initially Power On the Sun StorageTek 5320 NAS Cluster Appliance and Controller Unit
To Initially Power On the Sun StorageTek 5320 NAS Cluster Appliance, Controller Unit, and Expansion Unit
To Power On the Sun StorageTek 5320 NAS Cluster Appliance System After Initial Power-On
Initial Sun StorageTek 5320 NAS Cluster Appliance Configuration
5. Installing the Sun StorageTek 5320 NAS Gateway System
Installation and Configuration Task Overview
Connecting the Sun StorageTek 5320 NAS Gateway System to the Sun StorageTek 6130/6140/6540 Array
Sun StorageTek 6540 Array Controller Ports
Required Software and Firmware
Sun StorageTek 6140 Array Controller Ports
Connecting Directly to the Sun StorageTek 6130/6140/6540 Array
To Connect a Single-Server Direct Attach to the Sun StorageTek 6130/6140/6540 Array
To Connect a Dual-Server Direct Attach to the Sun StorageTek 6130/6140/6540 Array
Using Fabric Switches to Connect to the Sun StorageTek 6130/6140/6540 Array
To Connect a Single-Server Fabric Attach to the Sun StorageTek 6130/6140/6540 Array
To Share All Sun StorageTek 6130 Array LUNs Between All Port Pairs
To Connect a Dual-Server High-Availability Fabric Attach to the Sun StorageTek 6130/6140/6540 Array
Connecting the Gateway System to the Sun StorageTek FlexLine 200 and 300 Series
Connecting Directly to the FlexLine 200 and 300 Series
To Connect a Single-Server Direct Attach to the Sun StorageTek FlexLine 200 and 300 Series
To Connect a Dual-Server Direct Attach to the Sun StorageTek FlexLine 200 and 300 Series
Using Fabric Switches to Connect to the Sun StorageTek FlexLine 200 and 300 Series
To Connect a Single-Server Fabric Attach to the Sun StorageTek FlexLine 200 and 300 Series
To Connect a Dual-Server High-Availability Fabric Attach to the Sun StorageTek FlexLine 200 and 300 Series
Sun StorageTek FlexLine 200 and 300 Series Gateway Configuration
Modifying the Host Type on the Sun StorageTek FlexLine 200 and 300 Series Array
Changing the Host Type Region on the Scripts
Connecting the Sun StorageTek 5320 NAS Gateway System to the Sun StorEdge 6920 System
Connecting Directly to the Sun StorEdge 6920 System
To Connect a Single-Server Direct Attach to the Sun StorEdge 6920 System
To Connect a Dual-Server Direct Attach to the Sun StorEdge 6920 System
Using Fabric Switches to Connect to the Sun StorEdge 6920 System
To Connect a Single-Server Fabric Attach to the Sun StorEdge 6920 System
To Connect Dual-Server High-Availability Fabric Attach to the Sun StorageTek 6920 System
Connecting the Gateway System or Gateway Cluster System to the Sun StorEdge 99xx System
Connecting Directly to the Sun StorEdge 99xx System
To Connect a Single-Server Direct Attach to the Sun StorEdge 99xx System
To Connect a Dual-Server Direct Attach to the Sun StorEdge 99xx System
Using Fabric Switches to Connect to the Sun StorEdge 99xx System
To Connect a Single-Server Fabric Attach to the Sun StorEdge 99xx System
To Connect an Independent Dual-Server Fabric Attach to the Sun StorEdge 99xx System
To Connect a Dual-Server High-Availability Fabric Attach to the Sun StorEdge 99xx System
To Connect to a 100BASE-T Fast Ethernet Network or to a 1000BASE-T Gigabit Network
To Connect to an Optical Gigabit Ethernet Network
Connecting Dual-Server HA Servers
To Connect the Health-Monitoring Cable
To Connect to a Fast Ethernet or Gigabit Ethernet Network
To Connect to an Optical Gigabit Ethernet Network
Powering On the Gateway System
To Power On the Gateway System
Initial Gateway System Single-Server Configuration
Configuring the Single-Server System
To Activate the Sun StorageTek NAS Gateway License
To Configure Storage on the Sun StorageTek 5320 NAS Gateway System Single Server
Initial Cluster Gateway System Configuration
Basic Dual-Server System Configuration
To Activate the Sun StorageTek NAS Gateway License
To Configure SAN Storage on the Cluster Gateway System
To Configure Storage on the Cluster Gateway System
To Upgrade the Sun StorageTek 6130 Array Management Software
To Upgrade the Sun StorageTek 6130 Array Firmware
To Automatically Verify the Array
To Manually Register the Array
Making the Sun StorageTek 6130 Array SAN Storage Available
To Define a Sun StorageTek 6130 Volume
To Configure Storage on the Sun StorageTek 6140 Array
To Configure Storage on the Sun StorEdge 6920 System
To Configure Storage on the Sun StorEdge 99xx System
A. Hardware Technical Specifications
B. Third-Party License Agreements
| Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide | 819-4283-11 | |
Copyright © 2007, Sun Microsystems, Inc. All Rights Reserved.