Monitoring the 5800 System Using the GUI

<@ Monitoring the 5800 System Using the GUI

C H A P T E R 9

Monitoring the 5800 System Using the GUI

This chapter describes the GUI functions you can use to monitor the 5800 system. For descriptions of fields on the GUI screens, click the Help button from the screen.

For information on using CLI commands to monitor the system, see Monitoring the System Using the CLI.

This chapter contains the following sections:

Monitoring the System

Monitoring Cells

Monitoring Nodes and Disks

Note - For instructions on accessing the GUI functions described in this chapter, see Using the Administrative Interfaces.

Monitoring the System

This section includes procedures for using the GUI to monitor the overall 5800 system.

To Display Failed Components

1. Click the Home icon.

The Status at a Glance panel is displayed, providing a graphical representation of every cell in the system.

2. Mouse-over the image of a cell that has a red light or red rectangle displayed.

The component ID, its status, and its field-replaceable unit identifier (FRU ID) are displayed in the mouse-over window.

To Displaythe System Space Usage

Click the Home icon.

The Status at a Glance panel is displayed, providing space usage values in the Total Capacity and Total % Capacity Used fields.

To Display System Performance Statistics

From the navigational panel, choose Monitoring > View Performance Statistics.

The View Performance Statistics panel is displayed.

To Display the Environmental Status

You can view environmental status, including temperature and voltage information, about system components.

1. \From the navigational panel, choose Monitoring > View Environmental Status.

The Environmental Status panel is displayed.

2. Choose the search criteria from the drop-down list boxes.

The environmental status of the components that meet your search criteria is displayed in the table.

Monitoring Cells

This section includes procedures for using the GUI to monitor information about cells.

To Displaythe System Software Version on a Cell

Click the Home icon.

The Status at a Glance panel is displayed, with the system software version value in the Cell <identifier> Summary Cell Version field.

To Display the Nodes in a Cell

From the navigation panel, choose Cells > Cell <identifier>.

The Cell Summary panel is displayed, listing the nodes in the selected cell.

To Display the Disks in a Cell

From the navigation panel, choose Cells > Cell <identifier> > Disks.

The Disks Summary panel is displayed, listing the disks in the selected cell.

To Display the Cell IP Addresses

Click the Home icon.

The Status at a Glance panel is displayed, listing the administrative and data IP addresses used by each cell.

Note - To see the IP address of the service node, move your mouse over the service node in the illustration of the cell.

Monitoring Nodes and Disks

This section includes procedures for using the GUI to monitor nodes and disks.

To Display the FRU ID of a Node

From the navigational panel, choose Cells > Cell <identifier>.

The Cell Summary panel is displayed, listing the Field Replaceable Unit (FRU) IDs of the nodes in the Node FRU ID column.

To Display Node Space Usage

From the navigational panel, choose Cells > Cell <identifier>.

The Cell Summary panel is displayed, listing the nodes in the selected cell and their percentage of space used.

To Display the Node Status

1. Click the Home icon.

The Status at a Glance panel is displayed.

2. Mouse-over the image of the cell for which you want to view node status.

3. Determine whether the node is online or offline.

FIGURE 9-1 Online Node

Figure shows what node will look like in GUI if it is online, with green boxes.

FIGURE 9-2 Offline Node

Figure shows what node will look like in GUI if it is offline, with red box.

To Display the Disks in a Node

From the navigational panel, choose Cells > Cell <identifier> > Nodes > Node <identifier>.

The Node Status panel is displayed, listing the disks in the node.

To Display Disk Statistics

You can display the disk node, disk identifier, status, space usage, and field-replaceable unit identifier (FRU ID) of a disk.

1. Click the Home icon.

The Status at a Glance panel is displayed.

2. Mouse-over the image of the cell for which you want to view disk statistics.

3. Determine the disk statistics:

TABLE 9-1 Mouse-Over Values on the Status at a Glance Panel
Value Displayed	Description
	This mouse-over value determines the following: The node in which the disk resides is: `112`. The disk identifier is: `112:1`. The status of the disk is online: `OK`. Twenty five percent of the disk storage space is used.
	This mouse-over value determines the following: The node in which the disk resides is: 103 The disk identifier is: 103:1 The disk is offline: `disabled`. The field-replaceable unit identifier is listed.