| Oracle Integrated Lights Out Manager (ILOM) 2.0 | 
   |
| C H A P T E R 4 |
This chapter contains information on ILOM properties for Oracle’s Sun Netra T5440 server that augment the array of properties that are common to ILOM on other platforms. In particular, this chapter covers properties in the /SYS namespace.
At the -> prompt, type the following command:
-> set /SYS keyswitch_state=value |
where the setkeyswitch_state property has the following values:
| Option | Description |
|---|---|
| normal | The system can power itself on and start the boot process. |
| standby | The system cannot power itself on. |
| diag | The system can power itself on using preset values of diagnostic properties (/HOST/diag level=max, /HOST/diag mode=max, /HOST/diag verbosity=max) to provide thorough fault coverage. This option overrides the values of diagnostic properties that you might have set. |
| locked | The system can power itself on, however you are prohibited from updating any of the flash devices or setting /HOST send_break_action=break. |
| Oracle Integrated Lights Out Manager (ILOM) 2.0 | 820-4444-11 |
|
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.
To Control the Virtual Keyswitch
Using the CLI