Netra Proxy Cache Array User's Manual

Array MIB Definitions

Table 16-2 lists the groups and tables in the scalrd.mib file.

Table 16-2 Array MIB Definitions


Group or Table
Attribute Name	Description
`infoGroup`
`infoRev`	Revision number of daemon software.
`infoDebug`	Debug level.
trapGroup
`trapServiceName`	Service group name.
`trapTestName`	Test object name.
`trapServiceAddr`	Service address.
`serviceTable`
`serviceName`	Service group name.
`serviceOk`	Status of service on host. True means test passed.
`serviceQuiesce`	Whether service is quiesced on host. When a service is quiesced, the host cannot acquire any service addresses. However, it can release service addresses. The host's preferred service address will not be advertised by the DNS server.
`servicePort`	Port associated with service monitor. Used to communicate the status of a service.
`serviceHostId`	Host identifier within the service group.
`serviceControlAddrs`	List of control IP addresses.
`serviceBroadcastAddr`	Broadcast IP address.
`serviceInterface`	Service network interface.
`serviceAddr`	Service IP address.
`serviceAddrBegin`	Start of range of service addresses. Service monitor disables all service addresses in this range upon startup and termination.
`serviceAddrEnd`	End of range of service addresses. Service monitor disables all service addresses in this range upon startup and termination.
`serviceAddrTimeout`	Service address timeout. After the host owning a service address has failed, the period during which a service address continues to be served. Timing out of a service address enables the deinstallation of hosts and service addresses.
`serviceControlInterval`	Interval between the detection of a condition and the decision to act upon that condition.
`serviceTransmitInterval`	Interval between transmission of heartbeat messages. Should be smaller than `serviceHostTimeout` (below) and `serviceControlInterval`.
`serviceArpInterval`	ARP interval. Interval between initiating ARP broadcasts to update service group members' tables.
`serviceHostTimeout`	Host timeout. A period of inactivity beyond which a host is considered unavailable.
`serviceTestObjects`	Comma-separated list of test objects.
`serviceLoadObjects`	Comma-separated list of load objects.
`serviceDnsUpdateInterval`	Minimum time between DNS zone modifications done for load-balancing.
`serviceDnsMaxUtilization`	Load based on which the array daemon removes a host from a service group from a DNS zone and returns a host to the zone when the host's load decreases. The daemon computes high and low thresholds based on the number specified in this variable.
`serviceDnsUtilizationDelta`	Value added and subtracted to `serviceDnsMaxUtilization` to determine high- and low-water marks for a service/host.
`serviceDnsUtilizationScale`	Scaling factor for computing utilization.
`serviceDnsMinServers`	The array daemon does not allow fewer hosts than this number to be available, even if some number of hosts are overloaded.
`serviceDnsAllServersWhenLoaded`	When all hosts are overloaded, the array daemon can keep all service addresses available.
`serviceAddrTable`
`serviceAddrServiceName`	Service group name.
`serviceAddrServiceAddr`	Service address of a host in a given service group.
`serviceAddrExpire`	Time remaining before expiring service address.
`hostServingTable`
`hostServingServiceName`	Service group name.
`hostServingHostId`	Hostid of host serving a given service address.
`hostServingControlAddr`	Control address of host serving a given service address.
`hostServingServiceAddr`	Service address being served by a given control address.
`hostServingOk`	Indicates whether service address is associated with a control address that passes the service test.
`hostServingQuiesce`	Indicates whether a serving host is quiesced.
`hostServingState`	State of a service address on a serving host--acquiring, releasing, or online.
`hostServingLoad`	Load reported by a host for a service.
`hostServingCapacity`	Capacity reported by a host for a service.
`testTable`
`testName`	Name of a test object.
`testResult`	Result of a test: 0 for fail and 1 for pass.
`testQuiesce`	Indicates whether test is quiesced.
`loadTable`
`loadName`	Name of a load object.
`loadValue`	Value that indicates a host's load.
`loadCapacity`	Value that specifies a host's capacity.
`loadQuiesce`	Indicates whether test is quiesced.