The main Hostview window contains the buttons described below. If an out-of-boundary condition exists or an error has occurred, one or more of these buttons turn red.
The Power button (Figure 2-6) displays the Power Control and Status window, which enables you to view the power status for the platform. See "To Power Components On or Off From Within Hostview".
The Temperature button (Figure 2-7) displays the Thermal Status window, which enables you to view the temperature status for the boards and components within the platform. See "To Monitor Thermal Conditions From Within Hostview".
The Fan button (Figure 2-8) displays the Fan Status window, which enables you to view the status of the fans within the platform. See "To Monitor Fans From Within Hostview".
When certain error conditions occur, the Failure button (Figure 2-9) turns red. If you click a red Failure button, a window is displayed showing the error condition(s) that have occurred.
Table 2-2 describes the types of error conditions that are trapped by this mechanism.
Table 2-2 Error Conditions
Error |
Description |
---|---|
Host panic recovery in progress |
The operating system on a domain has failed and is recovering. |
Heartbeat failure recovery in progress |
The SSP was not receiving updated platform or domain information as expected. |
Arbitration stop recovery in progress |
A parity error or other fatal error has occurred, and the domain is recovering. See arbitration stop in the glossary. |