/opt/SUNWvts/bin/enatest standard_arguments -o dev=device_name, disk_access=enable|disable,disks=disk1:disk2:disk3:...diskn,disp=enable|disable, esfunc=enable|disable,conn=enable|disable,delay=delay_in_seconds
Table 17-6 enatest Command-Line Syntax
Argument |
Description |
---|---|
dev=device_name |
Specifies the name of an ses device in the enclosure. |
disk_access=enable|disable |
Enables or disables disk access. |
disks=disk1:disk2:disk3:... diskn |
Lists the disks contained in this enclosure that the disk_access test should attempt to access. The disk names are separated by colons (:). If this option is disabled, the test will access all disks found in the enclosure. |
disp=enable|disable |
Enables or disables the display of detailed status information regarding the enclosure elements. |
esfunc=enable|disable |
Enables or disables the Enclosure Services Functional test. |
conn=enable|disable |
Displays information about the connection to the host. |
delay=delay_in_seconds |
Sets the minimum delay (in seconds) between successive invocations of the test. |
64-bit tests are located in the sparcv9 subdirectory: /opt/SUNWvts/bin/sparcv9/testname. If a test is not present in this directory, then it may only be available as a 32-bit test. For more information refer to "32-Bit and 64-Bit Tests".