Reporting the Link Partner Capabilities
Table 3-9 describes the read-only link partner capabilities. Click on this link to return to Table 3-1.
Table 3-9 Read-Only Link Partner Capabilities|
Parameter |
Values |
Description |
|---|---|---|
|
lp_autoneg_cap |
0= 1= |
No auto-negotiation Auto-negotiation |
|
lp_100fdx_cap |
0= 1= |
No 100Mbit/sec full-duplex transmission 100Mbit/sec full-duplex |
|
lp_100hdx_cap |
0= 1= |
No 100Mbit/sec half-duplex transmission 100Mbit/sec half-duplex |
|
lp_10fdx_cap |
0= 1= |
No 10Mbit/sec full-duplex transmission 10Mbit/sec full-duplex |
|
lp_10hdx_cap |
0= 1= |
No 10Mbit/sec half-duplex transmission 10Mbit/sec half-duplex |
If the link partner is not capable of auto-negotiation (when lp_autoneg_cap is 0) the information described in Table 3-9 is not relevant and the parameter value = 0.
If the link partner is capable of auto-negotiation (when lp_autoneg_cap is 1) then the speed and mode information is displayed when you use auto-negotiation and get the link partner capabilities.
Click on this link to return to Table 3-1.
- © 2010, Oracle Corporation and/or its affiliates