Reporting Transceiver Capabilities
Table 3-8 describes the read-only transceiver capabilities. These parameters define the capabilities of the hardware. The local transceiver can support all of these capabilities. Click on this link to return to Table 3-1.
Table 3-8 Read-Only Transceiver Capabilities|
Parameter |
Description |
Values |
|---|---|---|
|
autoneg_cap |
Local transceiver capability of the hardware |
0 = Not capable of auto-negotiation 1 = Auto negotiation capable |
|
100fdx_cap |
Local transceiver capability of the hardware; initialized at startup |
0 = Not 100 Mbit/sec full-duplex capable 1 = 100 Mbit/sec full-duplex capable |
|
100hdx_cap |
Local transceiver capability of the hardware; initialized at startup |
0 = Not 100 Mbit/sec half-duplex capable 1 = 100 Mbit/sec half-duplex capable |
|
10fdx_cap |
Local transceiver capability of the hardware; initialized at startup |
0 = Not 10 Mbit/sec full-duplex capable 1 = 10 Mbit/sec full-duplex capable |
|
10hdx_cap |
Local transceiver capability of the hardware; initialized at startup |
0 = Not 10 Mbit/sec half-duplex capable 1 = 10 Mbit/sec half-duplex capable |
- © 2010, Oracle Corporation and/or its affiliates