Previous Contents Index Next |
iPlanet BuyerXpert 4.5 Installation Guide |
Chapter 1 Planning to Install BuyerXpert
This chapter describes planning and tasks you must perform before you can install BuyerXpert Version 4.5.
The following sections are contained in this chapter:
Assumptions About the Site Installer
Assumptions About the Site Installer
This guide is written with the following assumptions:
You are an experienced site administrator for the iPlanet Web Server (iWS) and the iPlanet Application Server (iAS).
You have a working knowledge of the Oracle database being used with BuyerXpert.
You are an experienced database administrator.
You have access to the root user ID (a necessity) and some UNIX administration experience as the root user.
Installation Checklist
The following checklist displays the tasks you should plan in advance to ensure a successful installation. You can refer back to this checklist as you complete each stage of the installation.
Be sure to perform each task in the order presented on the checklist in Table 1-1.
Make sure your system meets the following requirements:
See the section "Hardware Requirements."
See the section "System Requirements."
See the section "Software Requirements."
Verify the following:
Install the software in the following sequence:
Install the additional software:
Requirements
When you plan the configuration, you need to take into account the following:
Hardware Requirements
The following are the minimum hardware requirements to install and set up a BuyerXpert server:
Two SunSPARC E450 / U80 (or better) workstations with:
System Requirements
Table 1-2 lists the system requirements for the Sun workstation that you have designated as the BuyerXpert server. Log in as root to run the commands provided in the table.
Table 1-2    System Requirements
To check that this resource...
Has this minimum requirement...
Use this command
Make sure to apply any Y2K patches for the Solaris operating system.
Software Requirements
Table 1-3 lists the software requirements for installing and using the iPlanet BuyerXpert software.
Completing the Installation Worksheet
Record your specific settings in the installation worksheet before you install BuyerXpert. While in some cases you can use default configuration values provided by the BuyerXpert installer utility, there are some unique settings you must provide. The installer utility prompts you for this information during installation.
Examples provided in this worksheet also appear in the installation instructions in the following chapters.
After you complete the BuyerXpert installation, keep this worksheet in a safe place. It is useful in the future when you administer the system.
Note Make sure that you install the BuyerXpert and iAS as the same user. Do not install BuyerXpert and iAS as root.
.
Table 1-4    Installation Worksheet
Configuration Value
Example Given
Your Setting
Installation Roadmap
This roadmap lists the tasks you must complete in order to successfully install and configure BuyerXpert. For your convenience, the roadmap points to the chapter or to another manual that includes the information you need to complete each task.
Previous Contents Index Next
Copyright © 2002 Sun Microsystems, Inc. All rights reserved.
Last Updated June 10, 2002