LD-ID %.8X on StorEdge Array SN#%s: ALERT: clone failed (CH%d ID%d)
|
LD-ID %.8X on StorEdge Array SN#%s: ALERT: expansion failed
|
LD-ID %.8X on StorEdge Array SN#%s: ALERT: initialization failed
|
LD-ID %.8X on StorEdge Array SN#%s: ALERT: parity regeneration failed
|
LD-ID %.8X on StorEdge Array SN#%s: ALERT: rebuild failed
|
LD-ID %.8X on StorEdge Array SN#%s: ALERT: SCSI drive failure (CH%d ID%d)
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: adding SCSI drive completed
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: adding SCSI drive operation paused
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: clone operation completed), (CH%d ID%d)
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: continue adding SCSI drive operation
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: expansion of logical drive completed
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: initialization of logical drive completed
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: parity regeneration of logical drive completed
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: rebuild of logical drive completed
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting add SCSI drive operation
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting clone operation (CH%d ID%d)
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting initialization
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting logical drive expansion
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting logical drive rebuild
|
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting parity regeneration
|
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor failure detected (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor low threshold exceeded (current sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor low threshold exceeded (current sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor not present or failure detected (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor state changed to critical (current sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d cooling fan failure detected
|
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d cooling fan low speed threshold exceeded
|
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d cooling fan low speed threshold exceeded
|
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d cooling fan not present or failure detected
|
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d high speed threshold exceeded
|
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d high speed threshold exceeded
|
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d state changed to critical
|
Peripheral Device on StorEdge Array SN#%s: ALERT: high temperature threshold exceeded (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply AC failure detected
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply AC is OK
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply DC failure condition ended
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply DC failure detected
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply failure detected
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply high voltage threshold exceeded
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply high voltage threshold exceeded
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply low voltage threshold exceeded
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply low voltage threshold exceeded
|
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply state changed to critical
|
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor failure detected (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor high temperature threshold exceeded (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor low threshold detected (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor low threshold detected (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor not installed or failure detected (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor state changed to critical (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d AC line failure condition ended
|
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d AC line failure detected
|
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d battery failure condition ended
|
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d battery failure detected
|
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d DC line failure condition ended
|
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d DC line failure detected
|
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d general failure detected
|
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d state changed to critical
|
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor failure detected (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor high voltage threshold exceeded (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor high voltage threshold exceeded (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor low voltage threshold detected (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor low voltage threshold exceeded (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor not present or failure detected (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor state changed to critical (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: current sensor is ok (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: current sensor no longer critical (current sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: current sensor no longer critical (current sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: Fan %d cooling fan is ok
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: Fan %d cooling fan state no longer critical
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: Fan %d state no longer critical
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: Fan %d state no longer critical
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: PS%d power supply no longer critical
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: PS%d power supply OK
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: PS%d power supply state is no longer critical
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: PS%d power supply voltage is OK
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: temperature sensor is OK (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: temperature sensor low threshold no longer critical (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: temperature sensor no longer critical (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: temperature sensor no longer critical (T#%d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: UPS %d general failure condition ended
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: UPS %d state change notification
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: voltage sensor high voltage threshold no longer critical (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: voltage sensor is ok (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: voltage sensor ok (sensor %d)
|
Peripheral Device on StorEdge Array SN#%s: NOTICE: voltage sensor state no longer critical (sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: %s failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: %s threshold status critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor failure detected (current sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor low threshold detected (current sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor low threshold detected (current sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor not present or failure detected (current sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor state changed to critical (current sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan not present or failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d high speed threshold exceeded
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d high speed threshold exceeded
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d low speed threshold exceeded
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d low speed threshold exceeded
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d state changed to critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply AC failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply AC OK
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply DC failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply DC is OK
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply high voltage threshold exceeded
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply high voltage threshold exceeded
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply low voltage threshold exceeded
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply low voltage threshold exceeded
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply state changed to critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor failure detected (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor high temperature threshold exceeded (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor high temperature threshold exceeded (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor low temperature threshold exceeded (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor low temperature threshold exceeded (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor not installed or failure detected (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor state changed to critical (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d AC line failure condition ended
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d AC line failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d battery failure condition ended
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d battery failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d DC line failure condition ended
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d DC line failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d general failure detected
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d state changed to critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor failure detected (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor high voltage threshold exceeded (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor high voltage threshold exceeded (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor low voltage threshold exceeded (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor low voltage threshold exceeded (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor not present or failure detected (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor state changed to critical (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: %s now online
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: %s threshold status back to normal
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor is ok (current sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor low threshold critical ended (current sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor no longer critical (current sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d condition no longer critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan is OK
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d high speed condition no longer critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d low speed condition is no longer critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply high voltage condition is no longer critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d Power Supply OK
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply state is no longer critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply state is no longer critical
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor is no longer critical (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor is no longer critical (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor is no longer critical (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor is OK (T#%d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: UPS %d general failure condition ended
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: UPS %d state change notification--check UPS
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor is OK (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor no longer critical (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor no longer critical (voltage sensor %d)
|
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor no longer critical (voltage sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: %s failure detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: %s threshold status critical
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor failure detected (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor low threshold exceeded (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor low threshold exceeded (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor not present or failure detected (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor state changed to critical (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan Failure Detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan high speed threshold detected (%d RPM)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan high threshold detected (%d RPM)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan low speed threshold detected (%d RPM)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan low speed threshold detected (%d RPM)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan not present or failure detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d coolng fan state changed to critical
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: high temperature threshold exceeded (T%d = %6.2f%c)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: high temperature threshold exceeded (T%d = %6.2f%c)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: low temperature threshold exceeded (T%d = %6.2f%c)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: low temperature threshold exceeded (T%d = %6.2f%c)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply AC failure detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d Power Supply AC is OK
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply DC failure detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply DC is OK
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply failure detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply high voltage threshold exceeded (%5.2fV)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply high voltage threshold exceeded (%5.2fV)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply low voltage threshold exceeded (%5.2fV)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply low voltage threshold exceeded (%5.2fV)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply state changed to critical
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor failure detected (T#%d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor not installed or failure detected (T#%d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor state changed to critical (T#%d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d AC line failure condition ended
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d AC line failure detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d battery failure condition ended
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d battery failure detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d DC line failure condition ended
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d DC line failure detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d general failure detected
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d state change critical
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Voltage Sensor %d low threshold Detected (%d RPM)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Voltage Sensor %d low threshold Detected (%d RPM)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor failure detected (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor high voltage threshold exceeded (sensor %d) (%d RPM)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor high voltage threshold exceeded (sensor %d) (%d RPM)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor not present or failure detected (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor state changed to critical (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: %s Back Online
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: %s threshold status back to normal
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor is no longer critical (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor is OK (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor state is no longer critical (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan is no longer in critical state
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan is now operational
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan now above low speed threshold
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan now below high speed threshold
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply is no longer critical
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply is OK
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply voltage now within acceptable limits
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply voltage now within acceptable limits
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature no longer below low threshold (T#%d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor now below high threshold (T#%d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor now online (T#%d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor state changed is no longer critical (T#%d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: UPS %d general failure condition ended
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: UPS %d state change notification
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Voltage Sensor %d low threshold Critical Ended
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor is OK (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor now within acceptable limits (sensor %d)
|
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor now within acceptable limits (sensor %d)
|
StorEdge Array SN#%s CH%d ID%d LUN %d: ALERT: parity error detected
|
StorEdge Array SN#%s CH%d ID%d LUN %d: ALERT: re-select timeout
|
StorEdge Array SN#%s CH%d ID%d LUN %d: NOTICE: clear/abort-queue/abort-tag message received
|
StorEdge Array SN#%s CH%d ID%d LUN %d: NOTICE: SCSI bus device reset
|
StorEdge Array SN#%s CH%d ID%d LUN %d: NOTICE: SCSI bus reset
|
StorEdge Array SN#%s CH%d ID%d: ALERT: redundant path failure detected (CH%d ID%d)
|
StorEdge Array SN#%s CH%d ID%d: NOTICE: redundant path restored (CH%d ID%d)
|
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: aborted command
|
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: bad block encountered (%.2Xh, %.2Xh,%.2X/%.2X)
|
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: block reassignment failed
|
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: block successfully reassigned
|
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: data overrun/underrun detected
|
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: drive hardware error (%.2Xh, %.2Xh,%.2X/%.2X)
|
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: unexpected sense received (%.2Xh, %.2Xh,%.2X/%.2X)
|
StorEdge Array SN#%s CH%d ID%d: SCSI Drive NOTICE: scan SCSI drive successful
|
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: gross error on scsi bus detected
|
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: invalid status/sense data received (%.2Xh, %.2Xh,%.2X/%.2X)
|
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: negotiation error detected
|
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: SCSI parity/CRC error detected
|
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: timeout waiting for io to complete
|
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: unexpected disconnection encountered
|
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: unexpected drive not ready (%.2Xh, %.2Xh,%.2X/%.2X)
|
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: unexpected select timeout
|
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: unit attention received (%.2Xh, %.2Xh,%.2X/%.2X)
|
StorEdge Array SN#%s CH%d: ALERT: fibre channel loop connection failure detected (ALT CH%d)
|
StorEdge Array SN#%s CH%d: ALERT: redundant loop connection error detected
|
StorEdge Array SN#%s CH%d: ALERT: redundant loop failure detected (ALT Surviving CH%d)
|
StorEdge Array SN#%s CH%d: ALERT: redundant path expected but not found (CH%d ID%d)
|
StorEdge Array SN#%s CH%d: NOTICE: fibre channel loop connection restored
|
StorEdge Array SN#%s CH%d: SCSI Drive Channel ALERT: SCSI bus reset issued
|
StorEdge Array SN#%s CH%d: SCSI Drive Channel ALERT: SCSI channel failure
|
StorEdge Array SN#%s CH%d: SCSI Drive Channel NOTICE: SCSI bus reset issued
|
StorEdge Array SN#%s Controller ALERT: DRAM Parity Error Detected
|
StorEdge Array SN#%s Controller ALERT: pci bus 2 parity error
|
StorEdge Array SN#%s Controller ALERT: pci bus 3 parity error
|
StorEdge Array SN#%s Controller ALERT: power supply unstable
|
StorEdge Array SN#%s Controller ALERT: redundant controller failure detected
|
StorEdge Array SN#%s Controller NOTICE: controller initialization completed
|
StorEdge Array SN#%s Controller NOTICE: controller reset
|
StorEdge Array SN#%s Controller NOTICE: memory is now sufficient to fully support current configuration
|
StorEdge Array SN#%s Controller NOTICE: NVRAM factory defaults restored
|
StorEdge Array SN#%s Controller WARNING: memory not sufficient to fully support current configuration
|
StorEdge Array SN#%s Peripheral Device ALERT: %s %s threshold exceeded (%6.2f%c)
|
StorEdge Array SN#%s Peripheral Device ALERT: +%sV %s threshold exceeded (%5.2fV)
|
StorEdge Array SN#%s Peripheral Device ALERT: battery board failure detected
|
StorEdge Array SN#%s Peripheral Device ALERT: battery board not fully charged
|
StorEdge Array SN#%s Peripheral Device ALERT: battery board not installed
|
StorEdge Array SN#%s Peripheral Device ALERT: cooling fan failure detected
|
StorEdge Array SN#%s Peripheral Device ALERT: cooling fan not installed
|
StorEdge Array SN#%s Peripheral Device ALERT: cooling fan not installed or failure detected
|
StorEdge Array SN#%s Peripheral Device ALERT: elevated temperature alert
|
StorEdge Array SN#%s Peripheral Device ALERT: Fan %d %s threshold exceeded(%d RPM)
|
StorEdge Array SN#%s Peripheral Device ALERT: Fan %d fan failure detected
|
StorEdge Array SN#%s Peripheral Device ALERT: Fan %d fan not present
|
StorEdge Array SN#%s Peripheral Device ALERT: Fan %d not present or failure detected
|
StorEdge Array SN#%s Peripheral Device ALERT: power supply failure detected
|
StorEdge Array SN#%s Peripheral Device ALERT: primary battery board failure detected
|
StorEdge Array SN#%s Peripheral Device ALERT: primary battery board not fully charged
|
StorEdge Array SN#%s Peripheral Device ALERT: primary battery board not installed
|
StorEdge Array SN#%s Peripheral Device ALERT: secondary battery board failure detected
|
StorEdge Array SN#%s Peripheral Device ALERT: secondary battery board not fully charged
|
StorEdge Array SN#%s Peripheral Device ALERT: secondary battery board not installed
|
StorEdge Array SN#%s Peripheral Device NOTICE: %s temperature %s now back to non-critical level (%6.2f%c)
|
StorEdge Array SN#%s Peripheral Device NOTICE: +%sV %s: voltage now within acceptable limits
|
StorEdge Array SN#%s Peripheral Device NOTICE: battery board back online
|
StorEdge Array SN#%s Peripheral Device NOTICE: battery board fully charged
|
StorEdge Array SN#%s Peripheral Device NOTICE: battery board present
|
StorEdge Array SN#%s Peripheral Device NOTICE: elevated temperature now back to normal level
|
StorEdge Array SN#%s Peripheral Device NOTICE: Fan %d now online
|
StorEdge Array SN#%s Peripheral Device NOTICE: fan now online
|
StorEdge Array SN#%s Peripheral Device NOTICE: primary battery board back online
|
StorEdge Array SN#%s Peripheral Device NOTICE: primary battery board fully charged
|
StorEdge Array SN#%s Peripheral Device NOTICE: primary battery board present
|
StorEdge Array SN#%s Peripheral Device NOTICE: secondary battery board back online
|
StorEdge Array SN#%s Peripheral Device NOTICE: secondary battery board fully charged
|
StorEdge Array SN#%s Peripheral Device NOTICE: secondary battery board present
|
StorEdge Array SN#%s SMART: CH%d ID%d predictable failure detected
|