| Solaris Fibre Channel and Storage Multipathing Administration Guide |     |
| Solaris Fibre Channel and Storage Multipathing Administration Guide | |
Solaris Fibre Channel and Storage Multipathing Administration Guide
819-0139-12
|
Contents |
Fibre Channel Software Features
Multipathing Software Features With Fibre Channel Storage
3. Administering Multipathing Devices Through mpathadm Commands
To Get a List of Multipathing Support That Can Be Administered by the mpathadm Command
To Get the Multipathing Support Properties
To Get a List of Initiator Ports Discovered on the System
To Get the Properties of a Particular Initiator Port
To Get a List of Logical Units Discovered on the System
To Get the Properties and Associated Path Information of a Particular Logical Unit by Name
To List All Logical Units Associated With a Particular Target Port
To List a Logical Unit With a Particular Name Derived From the Hardware Used by the System
To Configure Auto-Failback for a Particular Multipathing Support
4. Configuring Multipathing Software
Enabling or Disabling Multipathing
Enabling or Disabling Multipathing on SPARC Based Systems
To Enable Multipathing on SPARC Based Systems
To Disable Multipathing on SPARC Based Systems
Enabling or Disabling Multipathing on x86 Based Systems
Enabling or Disabling Multipathing on a Per-Port Basis
Considerations for Per-Port Configuration
To Configure Multipathing by Port
To Configure an HBA Controller Port on a SPARC System
To Configure an HBA Controller Port on an x86 Based System
Disabling Multipathing on Third-Party Devices
Configuring Automatic Failback
Configuring Third-Party Storage Devices
Considerations for Third-Party Device Configuration
To Configure Third-Party Devices
Displaying Device Name Changes
Configuring Fabric Boot Devices on SPARC
6. Configuring IPFC SAN Devices
Determining Fibre Channel Adapter Port Instances
To Start a Network Interface Manually
To Configure the Host for Automatic Plumbing Upon Reboot
7. Sun Solaris 10, Update 1, x86/x64 Fibre Channel Operating System Booting Procedure
Minimum QLogic Corporation HBA BIOS levels
Minimum Emulex Corporation HBA BIOS levels
To Perform a CD ROM, DVD ROM, or Network-Based OS Installation
Post-Installation Patches for the Sun Solaris 10 Update 1 OS
8. Persistent Binding for Tape Devices
To Detect Fabric Devices Visible on a Host
To Configure an Individual Device Without Multipathing
To Configure Multiple Devices Without Multipathing
To Configure Individual Devices With Solaris Multipathing Software
To Configure Multiple Devices With Multipathing
To Unconfigure a Fabric Device
To Unconfigure all Fabric Devices on a Fabric-Connected Host Port
To Unconfigure a Fabric Device Associated With Solaris FC and Storage Multipathing Enabled Devices
To Unconfigure One Path to a Multipathing Device
To Unconfigure all Fabric-Connected Devices With Multipathing Enabled
| Solaris Fibre Channel and Storage Multipathing Administration Guide | 819-0139-12 | |
Copyright © 2006, Sun Microsystems, Inc. All Rights Reserved.