Configuration file templates are located in the sge-root/util/install_modules directory.
#------------------------------------------------- # SGE default configuration file #------------------------------------------------- # Use always fully qualified pathnames, please # SGE_ROOT Path, this is basic information #(mandatory for qmaster and execd installation) SGE_ROOT="/opt/n1ge61" # SGE_QMASTER_PORT is used by qmaster for communication # Please enter the port in this way: 1300 # Please do not this: 1300/tcp #(mandatory for qmaster installation) SGE_QMASTER_PORT="6444" # SGE_EXECD_PORT is used by execd for communication # Please enter the port in this way: 1300 # Please do not this: 1300/tcp #(mandatory for qmaster installation) SGE_EXECD_PORT="6445" # CELL_NAME, will be a dir in SGE_ROOT, contains the common dir # Please enter only the name of the cell. No path, please #(mandatory for qmaster and execd installation) CELL_NAME="default" # ADMIN_USER, if you want to use a different admin user than the owner, # of SGE_ROOT, you have to enter the user name, here # Leaving this blank, the owner of the SGE_ROOT dir will be used as admin user ADMIN_USER="" # The dir, where qmaster spools this parts, which are not spooled by DB #(mandatory for qmaster installation) QMASTER_SPOOL_DIR="/opt/n1ge61/default/spool/qmaster" # The dir, where the execd spools (active jobs) # This entry is needed, even if your are going to use # berkeley db spooling. Only cluster configuration and jobs will # be spooled in the database. The execution daemon still needs a spool # directory #(mandatory for qmaster installation) EXECD_SPOOL_DIR="/opt/n1ge61/default/spool" # For monitoring and accounting of jobs, every job will get # unique GID. So you have to enter a free GID Range, which # is assigned to each job running on a machine. # If you want to run 100 Jobs at the same time on one host you # have to enter a GID-Range like that: 16000-16100 #(mandatory for qmaster installation) GID_RANGE="20000-20100" # If SGE is compiled with -spool-dynamic, you have to enter here, which # spooling method should be used. (classic or berkeleydb) #(mandatory for qmaster installation) SPOOLING_METHOD="berkeleydb" # Name of the Server, where the Spooling DB is running on # if spooling methode is berkeleydb, it must be "none", when # using no spooling server and it must containe the servername # if a server should be used. In case of "classic" spooling, # can be left out DB_SPOOLING_SERVER="none" # The dir, where the DB spools # If berkeley db spooling is used, it must contain the path to # the spooling db. Please enter the full path. (eg. /tmp/data/spooldb) # Remember, this directory must be local on the qmaster host or on the # Berkeley DB Server host. No NSF mount, please DB_SPOOLING_DIR="/opt/n1ge61/default/spooldb" # A List of Host which should become admin hosts # If you do not enter any host here, you have to add all of your hosts # by hand, after the installation. The autoinstallation works without # any entry ADMIN_HOST_LIST="host1" # A List of Host which should become submit hosts # If you do not enter any host here, you have to add all of your hosts # by hand, after the installation. The autoinstallation works without # any entry SUBMIT_HOST_LIST="host1" # A List of Host which should become exec hosts # If you do not enter any host here, you have to add all of your hosts # by hand, after the installation. The autoinstallation works without # any entry # (mandatory for execution host installation) EXEC_HOST_LIST="host1" # The dir, where the execd spools (local configuration) # If you want configure your execution daemons to spool in # a local directory, you have to enter this directory here. # If you do not want to configure a local execution host spool directory # please leave this empty EXECD_SPOOL_DIR_LOCAL="" # If true, the domainnames will be ignored, during the hostname resolving # if false, the fully qualified domain name will be used for name resolving HOSTNAME_RESOLVING="true" # Shell, which should be used for remote installation (rsh/ssh) # This is only supported, if your hosts and rshd/sshd is configured, # not to ask for a password, or promting any message. SHELL_NAME="rsh" # Enter your default domain, if you are using /etc/hosts or NIS configuration DEFAULT_DOMAIN="none" # If a job stops, fails, finnish, you can send a mail to this adress ADMIN_MAIL="my.name@sun.com" # If true, the rc scripts (sgemaster, sgeexecd, sgebdb) will be added, # to start automatically during boottime ADD_TO_RC="true" #If this is "true" the file permissions of executables will be set to 755 #and of ordenary file to 644. SET_FILE_PERMS="true" # This option is not implemented, yet. # When a exechost should be uninstalled, the running jobs will be rescheduled RESCHEDULE_JOBS="wait" # Enter a one of the three distributed scheduler tuning configuration sets # (1=normal, 2=high, 3=max) SCHEDD_CONF="1" # The name of the shadow host. This host must have read/write permission # to the qmaster spool directory # If you want to setup a shadow host, you must enter the servername # (mandatory for shadowhost installation) SHADOW_HOST="hostname" # Remove this execution hosts in automatic mode # (mandatory for unistallation of executions hosts) EXEC_HOST_LIST_RM="host2 host3 host4" # This is a Windows specific part of the auto isntallation template # If you going to install windows executions hosts, you have to enable the # windows support. To do this, please set the WINDOWS_SUPPORT variable # to "true". ("false" is disabled) # (mandatory for qmaster installation, by default WINDOWS_SUPPORT is # disabled) WINDOWS_SUPPORT="false" # Enabling the WINDOWS_SUPPORT, recommends the following parameter. # The WIN_ADMIN_NAME will be added to the list of SGE managers. # Without adding the WIN_ADMIN_NAME the execution host installation # won't install correctly. # WIN_ADMIN_NAME is set to "Administrator" which is default on most # Windows systems. In some cases the WIN_ADMIN_NAME can be prefixed with # the windows domain name (eg. DOMAIN+Administrator) # (mandatory for qmaster installation) WIN_ADMIN_NAME="Administrator" # This parameter set the number of parallel installation processes. # The prevent a system overload, or exeeding the number of open file # descriptors the user can limit the number of parallel install processes. # eg. set PAR_EXECD_INST_COUNT="20", maximum 20 parallel execd are installed. PAR_EXECD_INST_COUNT="20"