Task Map for the Solaris 10 Installation

Use the Task Map for the Solaris 10 Installation table to preview the installation process defined as a series of tasks. This table identifies and describes the required tasks, and provides pointers to the instructions for performing that task.

Task Map for the Solaris 10 Installation

Step Task Description Relevant Topic(s) 1 Review installation prerequisites. This topic 2 Choose an installation method. Evaluate and select an installation method that meets the needs of your infrastructure. Solaris Installation Methods 3 Ensure that the BIOS factory defaults are set. Verify that the factory default settings in the BIOS are set prior to performing the operating system installation. Verifying BIOS Settings for New Installations 4 Gather the Solaris 10 10/08 installation media. The Solaris 10 OS is shipped with the CD and DVD media and documentation that you need to install the Solaris OS for both SPARC and x86 platforms. You can download or order the media for Solaris 10 10/08 at: http://wikis.sun.com/display/SystemsComm/Sun+Fire+X2270+M2+Server 5 Perform the Solaris 10 10/08 OS installation. The installation instructions in this section explain the initial steps for booting the installation media and launching the Solaris installation program. For further information about installing Solaris 10 10/08, refer to the Solaris 10 Installation Guide: Basic Installations. Solaris Installation Methods 6 Install driver(s) post installation, if necessary. After performing the operating system installation, if applicable, install the required operating system device drivers for your system. Installing System Device Driver(s) to Support Additional Hardware